Windows Update recommend myself KB905866 update that are not systematically with code 8007371B. What to do to fix?

Similar Questions

• I can't download windows updates that are important error message code 800 b 0001

  Since service pack 2 and service pack 1 is available, I can't download the 3 important updates... This is causing security alerts.

  http://support.Microsoft.com/kb/958045

  09:11:2208/05/11

• Windows 8 Upgrade Wizard indicates which programs are not compatible with your system

  I don't know about everyone else, but she answered a lot of questions, I was wondering about before jumping and spend money for Windows 8.

  Windows 8 Upgrade Wizard

  After running it, I discovered on the programs that I have that are not compatible with Windows 8, which will cost me more money to put to level. After checking prices for updating my software, Windows 8 would be too expensive to upgrade for me?

  Consider you the dual boot of Windows 8 OEM System Builder License with Windows 7 or run it in a virtual machine. It cost $99.

  Its also portable:

  Windows 8
  64-bit (OEM)

  Windows 8
  32-bit (OEM)

• I tried to install the window updates that are available to me and they keep for lack of error code 80070641 and now I can't open Windows Mail.

  I start to install updates now for several days and each time that they do not.  Error code 80070641 rises now and I now have problems in Windows Mail.   The update was for the Windows desktop.   When I opened my Windows Mail... error codes are as follows: Socket 10061 error and Error 0x800CCC0E #.

  Hi colorfulvue,

  Welcome to the Microsoft Answers site

  I would like to know if you are using Windows Live mail or Windows mail in Windows 7.

  Windows 7 comes with windows live mail default and a default windows mail vista.

  If you use Windows live mail you will need to post your problem on this link:http://social.microsoft.com/forums/en-US/categories/

  I suggest download you Windows Installer CleanUp Utility from the Microsoft Download Center:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Disable all security software.

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Then run this:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Try to install the updates manually by downloading the stand-alone package after the reset of the windows components.

  Follow this link to learn more:http://support.microsoft.com/kb/934307

  All the best! Thanks and greetings Bika: MICROSOFT SUPPORT Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start the update that are not up to date and progressbar isn't in the future.

  When I start my windows update there are 3 update:

  1. Update for the Microsoft visual studio 2008 pack 1 ATL for smart service of...
  2. Security Update for Microsoft visual studio 2008 service pack 1
  3. Update for Microsoft visual studio 2008 service pack 1
  which is not updated and progress bar does not go forward and don't no cancellation.
  What do I do?

  Hello

  Method 1:

  It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and try to update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135     

  Note: Once you have finished installing, follow step 7 article to start on normal startup.

   

  Method 2:

  Also try to update manually by downloading from the link provided below

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=fbee1648-7106-44a7-9649-6d9f6d58056e&displaylang=en

   

  Method 3:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Hope this helps,

• Blue screen of death after installing Windows updates that are automatically downloaded

  My computer got up until I get the blue screen whenever I try to install a Windows Update automatically downloaded.  The list of updates pending installation are KB978207, KB974470, KB971644, KB972270, KB905866, KB960362 and KB890830.  The first time that I have updated I just had the system install 7 all at the same time.  I got the blue screen and the computer may not restart normally.  Made the system restore and I tried to install each update one at a time.  7 all finished by gives me the blue screen with no reboot successfully after one of them.  I don't know what to do next.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CAN I get rid of the updates that are show; pping in Vista. I see in Windows 7 which is can remove old updates that are not needed. Can I do this with Vista?

  I am able to remove the old window of Dates in Windows 7 that overlap, when you go on the cleaning disc and touch clean system files, then the update windows clean up rises.  Then, you are able to remove the old of the dates that are no longer needed. This saves space.  Can I do this with Windows Vista?  If so, how?

  Hello

  This is the information from Microsoft about this:

  http://support.Microsoft.com/kb/2852386/en-us

  "Cleaning Windows Update option is available only when the Disk Cleanup Wizard detects the updates of Windows you don't need on the computer."

  This is only for Windows 7 and above.

  Loy Vista doesn't have this option of cleaning disc for Windows Updates and in all probability that Microsoft will not implement what Vista is now in Extended Support.

  _____________________________________________

  Here's how to clean your Vista hard disk:

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  By default system restore also includes 15% of the capacity of your hard disk under Vista space.

  You can change the size of it:

  http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Windows Update does not open in Mode safe while trying to install updates that are not installed in the usual way

  My computer will not install the important updates Service Pack. Support.Microsoft recommend safe, but in view Mode Setup without failure, you can not open the program update of Windows (from all programs). If I left click or right click and open nothing happens except that I immediately back to the Safe Mode screen.

  Hello

  • What is the antivirus installed on the computer program?
  • You receive an error message?

  I want to say that windows update does not work in safe mode.

  I suggest you follow the below methods that can help you solve your problem.

  Method 1: You can download Service pack 1 in normal mode and install in safe mode.

   

  Method 2: If above does not work, follow the procedure below:
  Step 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.

   

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

   

  Step 2:

  I suggest that you put your computer in a clean boot, try to install service pack 1 and control.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Reference:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

   

  See also:

  http://support.Microsoft.com/kb/2505743

• Update Windows automatically uninstalls the old updates that are not required?

  I recently installed my OS with the CD from the laptop that my system has been crushed. After you install a new Visa OS with laptop manufacturer's CD, he asked to install recent updates. The update of windows has installed the recent update one by one and themselves 237 update of windows which is really eating my disk space. Updates Windows automatically uninstalls the old updates that aren't necessary?

  Hello Stephen,.

  you hav to understand that there is no unwanted updates

  the best way to wat you can do is to install service pack 1 and 2 will have all nessaccery updates.

  You can find more information on this link

  http://support.Microsoft.com/kb/935791

  I hope you like my suggestions. Please mark as if you think that the suggestion to have fullfilled your quiry!

  cheeers

• Windows update install could not install with error 0x8024d007

  I have a situation where on one of my computers Security Center is not on so I can get no updates etc, I installed service pack 3, but this made no difference. The system I am running is XP Home edition.

  Hi Harry,.

  ·         Have you tried to turn on Security Center?

  Check to see if this article helps you.

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x8024D007.

• NIC card crashed in the middle of getting Windows updated. The updates that are not I can't.

  I am not able to get the updates failed

  Download the update and install the update manually
  http://www.Microsoft.com/downloads/en/default.aspx

  TaurArian [MVP] 2005-2011 - Update Services

• I'm set up XP for automatic updates, but I also received several updates that are not install

  no error code says just failed

  Thanks for your help and I have the following answers for you so far, my anti virus is with Kaspersky and the subscription is up to date, the malicious software removal tool has been downloaded successfully but I had some problems with safe mode which, for some reason, does not open but in the meantime, I ran the mrt and it produced a report saying that no problem not found. Re safe mode, my 4 choices on screen was as usual ST380011a, CDROM, USB HDD, INT LAN and I tried all but comes to open the windows?

  When you did install Kaspersky... When you purchased the system first or recently?

  Is it just Kaspersky Antivirus or is a suite that includes a firewall?

  The 4 choices you posted are quite rare, if you indeed tried to fashion without failure. It seems that you have entered the BIOS Setup , better known as the installer, not Mode without failure.
  The Start Menu, which is what you are trying to access the list

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Last good known Configuration
  etc.

  Please open the WindowsUpdate.log
  Scroll to the bottom of the journal.
  Place the cursor on the bottom right and left , click on the mouse.
  This will put a flashing line, it
  |    <---- it="" will="" look="" like="" that="" but="" it="" will="" be="">

  Now hold down left button and drag the cursor on the last 50 or so lines of text so that it is highlighted .
  The text still highlighted in the Menu on the top bar , then click on Edit , then copy .

  When you post your answer, then right-click on it to the top of the message window, then choose Paste .
  That will copy & paste the lines for 50 or so WindowsUpdate.log in your response.

  Thank you, directroy.

  MowGreen Services consumer safety update

• How can I get Windows 7 to search for locations that are not indexed when I have no indexed locations?

  I recently discovered what may be a bug or a serious error in the Windows 7 search engine, I'm not really sure of that.  Heck, it could be just that the options are formulated in a misleading way, and I don't realize.  Anyway slice you it, I have no sites indexed on my PC, or what I want, and I get no search results either.

  My settings are, AFAIK, set up so that Windows Search will search by file names and content regardless of whether the location of the research is indexed but except if it is indexed it returns no result.  As a concrete example, I have a folder with 701 files it contains.  Of these 700 more than 400 files contain the letter 'C' in the name of the file.  When the folder is indexed, they appear in a search.  When the folder is not indexed appear not at all.

  So, how to get Windows 7's search in unindexed locations?  I rarely use the search engine, in particular because it feels and is that it now seems to be, a massive downgrade on XP, but I still need it from time to time and I prefer not to index my PC just because Windows 7 will not search non indexed sections of my drives as it's a waste of given how little system resources I need to use it.

  HM, this is regrettable.  Something to try...

  Open the Indexing Options Control Panel, choose Advanced Options and click [Rebuild], which is supposed to remove and rebuild the indexes.  With the indexing service off, I could imagine that it would remove whatever remains of an index, you can have but not rebuild.  Which perhaps honest to the operation 'search the doomed drive already' goodness.

  I go through this process when I disabled indexing, and done, I can search and find things.  Keep hope; It can work.

  -Christmas

• How can I make Vista compatible with games that are not compatible with vista?

  I've heard that I can update vista to play games that were previously not vista compatible (in my case lego creator), but how do I go about this?

  Hi horsesprite,

  You can try to run the application in compatibility mode.

  Check out the link below to run the game in compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Adobe has changed all my files from MOBI book for Acrobat files that are not compatible with my Kindle

  How will we change my return to Accessories MOBI book attachments?

  What is your operating system?

  How did-"Adobe change all my files from MOBI book into Acrobat files" - they now have a .pdf extension?

  Or maybe your .mobi bad file association?