Windows Update redirect, downloaded Update KB2286198, Went to check for Mac Update Page, am running XP - Service Pack 3 for updates and directed me?

Similar Questions

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

• I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  I tried to download xpsp3 it's the fifth day to try, I have windows update and microsoft update open what I do

  Download and install it manually. Click HERE download Service Pack 3. Save the file to your desktop. Double-click the file and follow the prompts to install. Make sure that you disable security software like antivirus scanners or spyware before you run the file sp3.

• I tried with windows update and manually to download vista service pack 2, but these two don't

  I tried with windows update and manually download vistal SP2 but fails both: the process takes time and when download reaches 100% there is a message that says that the file is corrupted in the disk, I tried to check readers for bad mistakes, too, but the same problem persists.

  It may be a corrupted catalog file.  However, it can also be a corrupted system file.  In the latter case, the System File Checker may be able to fix it.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.  Alternatively, you can try to install clean or safe mode boot mode.  See

  http://support.Microsoft.com/kb/331796

  The procedure should work the same for Windows 7 and Vista.

  Enter the Mode safe mode by starting the cold computer and pressing the key function F8 repeatedly as soon as the manufacturer splash screen appears.

• Windows Update and download 10

  Is there a way to determine if the download actually occurs? The wizard get Windows 10 says that it starts downloading, but shows no progress and worked for about 24 hours. The task manager says it is running. Where the file on the hard drive? And what is resume-able? Here is a screenshot of the wizard GWX.

  

  See the following topics:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_10-windows_install/quick-tipe-how-to-monitor-your-Windows-10-download/47984a57-1492-4F4B-a0fb-10751288e67e

  You can also open Windows Update and monitor the progress of the download.

• Download updates from Windows updates and Windows Calendar

  I recently got a new laptop to Windows 8. I now have about 800 MB of installed updates. I'm stuck with Hughesnet and their ridiculous data caps. I have a Windows 7 computer that I can update at the end of each month, usually, I have 50 MB or so left each month. But there is no way I could download 800 MB during this period. Is it possible that I could download the updates automatically at night during the bonus period, or could I plan updates during this period. Free time is 2 at 08:00. Thanks in advance!

  Hello

  You can disable the Windows updates.

  Activate the Windows Update and install it during the bonus period. Windows do not have a function to install updates window by scheduling the task.

• Just did my laptop, tried to do windows updates and get a message T "here has been a problem the site witt" and can not open the page I requested at this time.

  Just, I redid my laptop using my system recovery disks. I went to windows update and get this msg when I click on Express.com: the site has encountered a problem and cannot display the page you are trying to view.

  Original title: I redid all my laptop. I went to windows update and get a message that says: there was a problem witht the site and I wanted that the pag can not open the page I have requessted at this time.

  You must download and install Windows XP Service Pack 2 (if not already installed) followed in Windows XP Service Pack 3.  You will find two of them at http://www.microsoft.com/downloads - download the "Network Installation Package" for the two and ignore the part about them being only for the professionals - the parcel I recommend you download will install with or without network connection.

• I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

  I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

  "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

  After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

  However, no matter how long it works, it never gets past "Setup initialization."... »

  So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

  So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

  So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

  Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

  In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

  Try the sfc scan:
  http://support.Microsoft.com/kb/936212

  If not, repair of Vista:
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Windows update and does not update Security Essentials

  Minimum information to validate:
  Version of Windows and Service pack level. (Windows XP Home Edition, SP3; Vista Home Premium, SP1; Windows 7 Ultimate, etc...)
  Post also if you use 32-bit or the 64 bit version of Windows.

  32-bit of WINDOWS XP Service pack 3

  Update the number of the last update installed before any problem.  If you do not know the number of update, then give the date that the update has been installed.  The number of updates update failed.

  Last scan 06/06/10 at 552 am.

  Error code updates failed or if you think an update caused a blue screen, give the blue screen error codes.

  No blue screen or error code

  Other information to validate:
  Measures already taken to correct the problem and the results of the measures.
  many of these forums checked.  Ran malwarebytes.

  If the question is never happened before with other updates.
  Never happened before

  A few other useful parts are:
  What program antivirus you use, if it is up-to-date, and there has never been any other installed antivirus program.
  If your version of Windows has been upgraded from a previous version or if it came with (or clean installed with) the version you are currently using.

  MSE.

  I fear that the computer has already been infected by the time wherever you got installed MSE, Jim. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  NB: If it was repairable, the KB971058 difficulty he could do.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care ofeverything on the next page before connecting the machine to the internetor a local network (i.e. other computers) and before using a USB or SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: The free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the Norton Removal Tool to new front to install updates, Windows Service Packs or IE upgrades and before installing MSE again (which will require WinXP SP3 must be installed).

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  Wish I had better news for you. Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Code 80070241 in Windows update and "Windows cannot verify the digital signature for this file" when you try to run any program.

  Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.

  I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »

  After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).

  The restoration went well, restarted, but the problem persists.

  Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.

  The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.

  The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.

  It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.

  On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.

  The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.

  Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.

  However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.

  ***************************************************

  Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?

  Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.

  This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.

  So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.

  Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.

  * shrug *.

  Computers.

• I am running xp service pack 2 of windows on a new hard drive, I just installed and I'm trying to update

  I just rebuilt my fathers system, new drive hard windows xp service pack 2 installation costs and try to update. When I try to update Microsoft update, I get:

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues)

  Help, please. My father and I thank you.

  Download IE 8 and service pack 3 on a flashdrive from a known working computer. Install it on the computer in question.

  Service Pack 3 download

  Internet explore 8

• After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8.

  After a fresh install with XP Home EWdition, Service pack 1, 2.0, and 3.0, I can't install Windows Update or IE8. Update back me to http://support.microsoft.com/kb/2497281

  Article ID: 2497281 - last review: January 18, 2011 - revision: 1.0

  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000, or Windows Server 2003 if these versions of Windows are not updated with the latest Service Pack

  But I have service Pack 3.  IE8 fails, install a convenience store, but after following the instructions there is no difference.

  I am at a loss for the next steps...

  There was problems with the server for updates for a few weeks now...

  Many people say that download and run the Update Agent stand-alone file solves this problem:

  http://download.windowsupdate.com/WindowsUpdate/redist/standalone/7.4.7600.226/WindowsUpdateAgent30-x86.exe

  For more information:

  http://support.Microsoft.com/kb/943144

  For later use, it is not necessary to use all the steps you mentioned. You can upgrade directly from SP1a to SP3.

• Have a Windows update and my screens are all screwed up now, Please HELP!

  I am running Vista Home Basic and day before yesterday when I rebooted my computer, a Windows update itself installed. He said he was installing 1 of 1 files. I knew the idea of what the update was for, but when I brought my system to the top of the screen and all open windows, including web screens are all strange and almost hourglass like? I tried to restore my system to three times, tried to adjust resolutions and even settings on my old monitor and nothing works. It also seems that all icons and things are a little bit bigger and I don't see anything on the left and the right of my screen. Can someone help me? The only thing that seems normal is the password screen that appears when I turn on my computer before I get to my home page? Any ideas?

  Hi PVneedshelp,

  Welcome!

  I suggest that you try to system restore to the point before you install the update by using the Windows vista installation disc.
  To use the Windows recovery environment, you must have the Windows Vista or Windows 7 installation disc. To start the Windows recovery environment, follow these steps:
  1 put the installation disc in the disc drive, and then start the computer.
  2. press a key when you are prompted.
  Note If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  3. Select a language, a time , and monetaryand a method of keyboard or input and then click Next.
  4. click on repair your computer 
  5. in the dialog box System Recovery Options, click the operating system you want to repair, and then click Next
  In the System Recovery Options dialog box, click System Restore to restore the operating system to the restore point created when the program or the driver has been installed.
   
  Check out the link for more information below.
  http://Windows.Microsoft.com/en-us/Windows7/restore-your-computer-from-a-system-image-backup

  If the previous step fails, then I suggest that you uninstall the display adapter driver that is present on the computer and then install the latest driver for graphic map of the manufacturer's Web site and check if it works very well.

  You must be logged on as administrator to perform these steps.
  How to uninstall a computer device driver.
  1. open the Manager of devices by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then clicking device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, look for the device you want to Update, and then double-click the nameof the device .
  3. click on the tab driver , then click Uninstall and follow the instructions.
  Once the uninstall is complete, restart the computer and then install the driver to view CAD that you downloaded from the website of computer manufacturer.

  Also suggest to run Windows updates and make sure that you install the availability.

  1. open Windows Update by clicking the Start button, all programsand then click Windows Update.
  2. in the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.
  3. If updates are found, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows updates and updates Antivirus on Windows Vista

  Original title: laptop computer started to freeze on virus scan always on the same folder.carried on the full recovery of the system partition on laptop, then only left with factory shipped programs. Unable to download windows updates or antivirus updates.

  OS Vista Home premium version 6. No display service pack not installed? THAT IS TO SAY 7. After the system recovery, I had 2 anti-virus bootable and performed analytical full but neither anything picked up.

  Hello

  ·        What happens when you try to update windows? You get the error message?

  ·        What are the updates you are trying to install (KB number)?

  ·        What security software you use?

  I suggest to disable the security software and then try to install windows on the system updates and checks to see if you are able to install or not.

  Note: Activate security software once you've done the test.

  Check in the window update and we do know are the updates that you try to install on the system. See the article mentioned below.

  Updates: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  Step 1:

  It may be that some third party software is running in the background which is interrupted, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  Step 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Step 3:

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser