Windows updates stop at my laptop since the start or stop

For the third consecutive day time my PC spent a good 20 minutes stop down and at least 10 minutes because he is to configure startup updates.

What should do?

CrystalBall © SEZ...

Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • Windows Update stops to take back me to the restore point

    Windows Update stops to take me back to restore point windows 7

    Problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

    Open the Windows Update troubleshooting tool
    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

    TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

    Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

    Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

    Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

    1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

    2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

    3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

    5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

    How will I know if my computer is up to date?
    http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Update stopped working.

    I have the 64 bit version of Windows 7 SP1 installed on my laptop [Dell Studio 1747 with processor i7 4 GB RAM & 750 GB hard drive.  Windows Update stopped working on my machine.  All updates through April 19, 2016 have been installed.  I already did the following:

    (1) installed the previous images dating back to several months

    (2) only run WindowsUpdateDiagnostic.diagcab to get error # 0 x 80070005 several times

    (3) race reset Win Update.bat unsuccessfully

    (4) run MicrosoftEasyFix20179.mini.diagcab without success

    (5) I tried install subinacl.msi and runs the recommended Reset.cmd file

    (6) installed WindowsUpdateAgent-7, 6 - x 64 .exe

    All the latter were applied as suggested on the Microsoft Support Website.  None of these maneuvers in addition to the various applications of my antiviral software and malware, brought any resolution of the problem.  I would appreciate any suggestion short of a new facility, because I can't seem to find anywhere, all the new boards.

    I don't know what worked, but Windows Update started to update itself again.  What I don't have, though, was to limit the number of updates, I got the update at some point, less than 30.  I read a post at one point noted that a large number of updates may increase the risk of errors of download and installation.  I had some mistakes on the first download, but those corrected when I download tracking the rest of the updates.  I do not wish that Microsoft would create a repair or update protocol independent site, because it seems that this is not an uncommon problem.

  • MAKE WINDOWS UPDATER STOP annoying me

    Is there a way to make Windows Updater STOP recommending an update 'Important '?  I don't use Internet Explorer, it ask me download a 8.8 MB 'security update' for IE, which I did not need.

    Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

    While you can't use IE, Windows does so it is very important to keep IE (and Windows) fully-patched at all times!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

    Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

    Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

    By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

    Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

    TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows Update stops download of updates and install updates same as if they were never installed

    Windows Update stops download of updates and install updates same as if they were never installed

    Hi Skimbrell,

    Welcome to the Microsoft Answers Community Forum site!

    To resolve this problem, determine if the update has been installed. Then, use one of the methods in the section "Troubleshooting the problem.

    Determine whether the update has been installed

    To determine if the update has been installed, use one of the following methods.

    Method 1: Examine the history of installation
    To view the history of installation, follow these steps:
    1. click on Start, point to all programs, and then click Windows Update or Microsoft Update.
    2. on the Web site, click view update history.
    3. Locate the most recent entry for the specific update.
    4. Note the color of the icon in the status column. If the icon is green, the update has been installed. If the icon is red, the update is not installed.

    For more troubleshooting information, visit the below mentioned link:
    http://support.Microsoft.com/kb/910339/

    Method 2: Reset Windows Update components.
    In order to reset Windows update, visit the following link:
    http://support.Microsoft.com/kb/971058

    I hope the above helps solve your problem!

    Thank you best regards &,.
    Calogero - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • R400 - internet stops working after 2 min. Since the start of Vista

    Hello
    My new ThnkPad R400 with Vista, I have a problem with the automatic connection to the WiFi network. In the Access Connections software, I put my home wireless network. When I turn on computer and access the internet, it's ok, but after about 2 minutes since the start of Vista, the internet stops working. Ping is still OK for each site (google.com, yahoo.com...), but I can't open any website. When I disconnect and then connect to the network, its straight until the next time the computer starts.

    I'm very anxious, I tried to fix a lot of hours, but nothing helped.

    You have any ideas?

    Thank you.

    I solved my connection drop problem! I've updated the Wi - Fi drivers and now everything is OK.

    Full instructions are here: http://forum.thinkpads.com/viewtopic.php?p=471886#p471886

  • Windows Update stopped working Windows 7 64 bit

    Hello

    I'm currently under Windows 7 64-bit and Windows Update stopped working. When I open Windows Update and click on ' Check for updates ' I get an error message stating "Windows Update cannot currently check for updates, because the service is not running." "You may need to restart you computer. After the restart of several times there is no change. I use Vipre Antivirus and Windows Firewall, I think. Any help would be great.
    Thank you
    Doug

    Deletion of c:\windows\softwaredistribution\datastore\logs\edb.log

    Reboot and try...

  • Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

    Hi people

    I'm on Windows 8, and in these last days, I get this message

    " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

    It is on a blue banner that goes directly to the screen and it is very annoying

    I get updates through so I do not understand this

    Any help would be great

    PS I have tryied the restoration of the system, and it's always the same

    Lee was soon

    Original title: looking for some help please

    Hi Lee,.

    I had this same problem and it drove me crazy, but I solved it.

    I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

    below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

  • My 2 TB TC is full and will not back up. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

    My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

    I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.

    Any suggestions on getting my TC back up?

    One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.

    A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.

    Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.

  • Windows Update error "windows update location must be replaced with the default windows location."

    Original title: Failed to automatically / thru fixit updated windows installation (another) indicates both failed 1 of 5. It says windows update location must be replaced with the default windows location

    XP86 running. Recently had installed the additional memory. Microsoft Update icon never goes away - seems like if 1 of 5 updates usually install on a group. Keep trying to install updates (even those) again and again. Sometimes we will not install and then moved the next time, he's trying to install the same updates, another a group. Worked through say fixit and details window update location must be changed to windows default = - but did not say how.

     

    Hello

    Have you tried Microsoft Fix - it?

    See the following article:

     

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756/

     

    You cannot install some programs or updates

  • Getting errors on the 3 Windows updates: 2699988, 270162, 2685939. On the first try error codes were 0 x 80246007 and 0x8007010B

    Getting errors on the 3 Windows updates: 2699988, 270162, 2685939.  On the first try error codes have been 0 x 80246007 for all 3, try subsequent was 0x8007010B.

    Configuration is Windows XP SP3 with MSIE6 (test the system reads old browser).  Any suggestions?

    Original title: get errors on the 3 Windows updates

    Maybe: http://support.microsoft.com/kb/958042

    When you try to install the updates on the Windows Update Web site or the Microsoft Update Web site, you may receive a "0 x 80246007" error code

  • Windows and Windows update install error 641 that install the windows service could not be accessed

    Original title: Windows Installer and windows update error 641

    I get the following error when I try to install the latest Java Update. "The windows service install could not be accessed. This can happen if windows install is not properly installed. Contact your support team. In addition, I now have 14 exceptional installed updates which always fail with error 641. I have Vista 32-bit SP2. In addition, in respect of the services Windows Installer does not show so I can't restart. I tried all the other patches. Any ideas?

    So what do you suggest...

    Have you tried the resolution in RESPONSE to my colleague Maurice message in this related thread yet? -Online http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

    Have you contacted Mechnic (iolo.com) support system yet?

  • My Windows Update does not seem to recognize the need for updates

    My Windows Update does not seem to recognize the need for updates to the programs... This has happened for a long time. It will only recognize the updates of Microsoft Security Essentials, but when he checks the updates it points only to the basics of security. I don't know there are updates that Microsoft Updates jumps...

    msft777jf,

    Check the 2nd Tuesday of each month - later in the day. (after 10:00 Pacific time)

    06/06 / 1107:38: 16 pm

Maybe you are looking for