Windows Virtual PC - the integration features enabled but still were not readers, and no access to the network
I'm under Windows 7 Home Premium (64 bit) with internet access provided through a USB modem with a SAM card, or through a wireless router (using the same modem). It comes from the host machine.
I installed Windows Virtual PC.
I installed Windows 7 as the operating system on the Virtual PC.
I installed and activated the integration features.
Now, I have two problems:
1. I activated the HARD disk on the host through integration features settings, but readers do not always appear.
2. I set the first NIC on the guest operating system as the shared networking (NAT). However, I can still access the Internet.
Any help will be appreciated. If you need more information, I would be happy to provide.
Hi James.
This problem is better supported by TechNet. I suggest you follow the link below to send the request on the TechNet forums.
https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro
Hope this information is useful.
Thank you.
Tags: Windows
Similar Questions
-
How can I fix the "drag and drop" feature in Windows 7? It used to work, but now does not work, for no apparent reason!
What happens when you try? Make sure you drag the icon image and not the text of the name.
If it still doesn't work there are some registry changes that can try to alleviate the problem. But because the changes to the registry are tedious and dangerous, I recommend to leave the system to repair it for you. Here's how:- Type of restore in the search box of the start menu to find and open to restore system files and settings from a restore point.
- Click Next, choose a date before the problem started, then click Next once more.
- This process only takes around 2 minutes and only restores your system files/settings: it will not affect any of your files, documents, photos, emails, or anything else.
If the system restore does not resolve the problem try this to replace missing or corrupted system files. Here's how:- Type cmd into the start menu search box, and then press Ctrl-Shift-Enter to launch as administrator.
- At the command prompt to start the File System Check, type sfc/scannow .
-
I downloaded the last Adobe Flash - it is said to be successful but will not work. What he says "Manage plugins but the plugin says it is enabled, but it will not work." I have tried disabling and then enabling - without success. Help, please!
There are two different versions of Flash. ActiveX for IE version and the version of the Plugin for other browsers. Have you installed the correct version? This forum software is not thing that Flash is installed for Firefox or the Plugin is disabled.
1. download the file of configuration Flash from here:
Adobe Flash - Plugin version.
Save it to your desktop.2. close Firefox using file > exit
Then check the Task Manager > processes tab to make sure that firefox.exe is closed.
{XP: Ctrl + Alt + Delete, Vista: Shift + Ctrl + ESC process tab =}3. then run the Flash configuration from your desktop file.
4. run Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- On Vista and Windows 7, you may need to run the installer of plugin as administrator by starting the installation program via the context menu if you do not get a UAC prompt for permission to continue (that is to say that nothing seems to be happening).
See this:
http://vistasupport.MVPs.org/run_as_administrator.htm -
I have through Trend Micro antivirus protection, windows tells me Virus Protection is enabled, but is its status as Windows Security Center in a format that is no longer supported. How can I fix this in Windows.
Hi Nancy DeVries
Have you tried to uninstall and reinstall the anti-virus software?
The problem could be linked to the current settings for the Trend Micro software. Then I suggest you to contact the assistance and control software support team.
I hope this helps.
-
Recently bought studio 15 laptop with windows 7 and I try to run need for speed pc underground game on her, but she does not appear and the message "speed.exe has stopped working" appears on the screen. can someone help us?
Hi Andy,.
I checked the reported compatibility list, and the game is listed as compatible. Work in 64-bit or 32-bit Windows 7? I will try to reinstall the game, if you did an upgrade from Vista to Windows 7 recently. If it is a new installation and does not, please visit the EA's Web site to get the latest patch for the game to see if that helps address your problem. Let me know if you've done all that and you still have questions, and we can try something else.
Kevin
-
Windows Live Essentials installed on my computer, but still unable to upload photos to transfer from.
Would appreciate any advice.
Hi JohnHyde,
The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
http://windowslivehelp.com/product.aspx?ProductID=15 -
Windows service pack 1 downloads 99.9% but still comes up with error and does not?
jktjw,
Please post with the information requested here: what to post in the Windows Update forum
Start with the troubleshooting steps and post returns with the requested info and arises from the troubleshooting.Clean boot your PC, and then run Windows Update.
Reset the Windows Update components
Perform operations of KB883825
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Unable to connect because of firewall or something, not true of course
When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.Hello
I suggest you to follow the steps in troubleshooting this article and check if it helps:
Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
http://support.Microsoft.com/kb/871122
Also read these articles and check:
In Windows network connection issues
http://support.Microsoft.com/kb/313242
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
Hotmail blocked
My partners hotmail account is blocked we have followed all the instructions, but still does not allow access. The alternative e-mail account is no ideas
Hello
The question you have posted is related to Windows Live and will be well suited in the Windows Live Forum. Click on the link below.
Windows Live Solution Center
-
Good afternoon my windows live has been hacked and unable to access my account, tried to reset my password but still could not get my mail
Hello
The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.
http://windowslivehelp.com/product.aspx?ProductID=15 -
I can't use windows Explorer or the network drive mapping to access my NAS drive more.
original title: strange NAS problem
Hi everyone I can't seem to fix this strange problem.
I can't use windows Explorer or the network drive mapping to access my NAS drive more.
I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.
Here is some info.
I can access to other computers and devices on my network.
I can access the internet.
I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
I PING the NAS drive.
The NAS drive will do the same if connected via cable or by wireless.UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.
Help, please.
Thanks for the help, but I fixed my problem
Here's what I did in case anyone wants to know.
I went into Device Manager and went to network adapters.
I then expanded this section and under view changed to display hidden items.
Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
Then click scan for new hardware.
And... everything works again! YAY! -
Seagate installs but I can not find and cannot open the unit to see my files
whenever I installed my seagate freeagent go drive.. initio default controller is the one that pops up saying ready for use, but I can not find and cannot open the unit to see my files, I can see it as (which I think it's maybe) in devices, printers as 'Initro Default Controller.
The disc may need a drive letter must be attributed. Please try the following link to assign a drive letter to the drive.
http://Windows.Microsoft.com/en-in/Windows7/change-add-or-remove-a-drive-letter -
I just bought a Windows 7 Edition upgrade Home Premium to professional, but it will not install and told me to get a dfferent key.
Windows 7 Anytime Upgrade fails:
If your getting the following: error: Windows Anytime Upgrade failed
This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
See: http://support.microsoft.com/kb/2660811= Other reasons and possible corrections.
Windows Anytime Upgrade fails with the error:
"every time that the upgrade has failed. Go online to solve the problem.
http://support.Microsoft.com/kb/2658652If Anytime Upgrade still does not work:
Shut down and restart your computer.
Make sure that the Windows updates have been installed.
Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821
If Anytime Upgrade still does not work, turn off the user account control:
1. go in user accounts in Control Panel
2 change user account control settings
3. pull the slider to the level as low as possible
4. restart the PC
5. pass by the "Anytime Upgrade" as usual
Try the following:
1 disable any security software before attempting to upgrade
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
1. click on start, type msconfig in the search box and press ENTER.
User account control permission
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after the computer starts, check if the problem is resolved.
Also run the Windows 7 Upgrade Advisor:
http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx
Who should I contact if I have problems installing and / or activation of my product key card?
Please contact to the: www.windows7.com/getkeysupport.
If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:
Learn how to install Windows 7 Service Pack 1 (SP1)
http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade -
6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start? What should do?
My computer is a PC with Windows 10.
Everything worked well before the Update Adobe Lightroom 6.
The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?I apologize for the inconvenience.
Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.
We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.
Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows
-
I bought a new carmera and Photoshop CS4 camera Raw can not read the ARW files. I downloaded the lateset update but still can not read how can I get this problem solved thanks
Hi tonyf,.
Greetings!
Each device is compatible with a minimum version of camera raw.
Here is the complete list: https://helpx.adobe.com/camera-raw/kb/camera-raw-plug-supported-cameras.html
Please check if you have this version of the camera installed which include your raw files.
It would also be that your photoshop will not have to install this version of camera raw as its very old.
In this case, you can convert your raw files to DNG and can use it.
To convert the files to DNG, you must download and install the DNG Converter.
Here is the link:
Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows
MAC: http://www.adobe.com/support/downloads/product.jsp?platform=Macintosh&product=106
Concerning
Jitendra
Maybe you are looking for
-
Characters of legal Firmware Password
Characters of legal Firmware Password What are the legal characters to use the password of the firmware for a mac. I read alphanumeric are accepted and that of other characters may cause a problem, but this seems silly. What characters are allowed as
-
Function of good decimation?
Hello I need to decimate certain curves with DIAdem (the user specifies the time beginning, duration and increment; and then, it executes the decimation). I tried the 'reduction of the classification' function, but it doesn't really realize what I ne
-
I want to restore the system to the original factory State.
I want to restore the system to the original factory State. I did a disk backup set when I bought my computer laptop hp pavillion dv6823us origin and does not matter if I try to use or to start and try F11, or work. Device Manager indicates this cd r
-
I don't know what to do. I tried the Microsoft ATS but no dice.
-
Transfer photos selected on a CD - R Photo Gallery
Want to transfer selected photos from photo gallery on a recordable CD - R, but had no chance to get the selected photos, like all the pictures is still show!