Windows Vista (Home Premium) - updated this a blank page

Hello

I have 3 PC who exhibit the same problem. When I go to Windows Update, the window frame is displayed, but no information is displayed in it. The tank is completely empty and cannot be closed without ending the application in the Task Manager. To end the application in the Task Manager, the PC shows that expplorer of windows has stopped working and must be restarted.

Any help how to solve this problem would be appreciated as all machines must be updated to SP2.

I am also running ZoneAlarm Internet Security. Information about the recent updates that can cause this problem, if it is known would also be appreciated.

Thanks, Jeff

No ZA Internet Security is installed on all affected systems 3 and the issue occurred before it is installed?

See: some Windows Vista functions may not work, or Windows Vista may stop responding

MowGreen MVP Data Center Management - update of safety Consumer Services

Tags: Windows

Similar Questions

Windows Vista Home Premium update problem step 3 of 3-100% complete

My Windows Vista Home Premium began the automatic update, reached the point of view "Configuring updates: stage 3 of 3-100% complete.". Do not turn off your computer. »

Now he's just running for hours with this screen showing...

I can't say if this update will end finally alone, or if there is a problem and I should just reboot.

How long should I wait before abandoning me and shut down the computer?

Thank you.

Hi JIB1955,

Thank you for visiting the forums of answers.microsoft.com.

It's been a while, we can think that the update is stuck and will not continue any further. You can press Ctrl, Alt & Del and open Task Manager. You should see the update on the Application tab, and you can select it and press end task.

Click on the start ORB > Control Panel > programs and features, on the left, select view installed updates and see if the update that was being Setup finished installing. If it does not have and does not appear on the list, you can restart your computer and try to install the update mode without failure.

To do this, restart your pc and even if your pc is booting press the key F8 on your keyboard to enter the Advanced Boot Options menu. On the Advanced Boot Options menu, select Safe Mode and press ENTER.

Your computer will boot mode safe by using only the basic drivers and services, hopefully allowing Windows Update to complete the installation of the update, you are having problems with.

Please let us know if you make any progress this way

Kavita M
Microsoft Answers Support Engineer
Visit the Microsoft Answers Feedback Forum site
and let us know what you think.

Windows Vista Home Premium update froze during the 'configuration' June 30, 2009.

Received notification of five updates to install on my computer Windows Vista Home Premium, one of them being Internet Explorer 8. All the downloaded slowly. Each of them appeared to install, but slowly and I left the computer while he was installing the 3rd update. When I came back it had evolved in the 'Configuration' screen (always see after there are updates and it restarts) and sat there for hours. It reads "Configuring updates: stage 3 of 3, 0% complete. The percentage of nevers turns off 0%. I finally turned off the computer and when she started he said windows had not closed properly so I chose the Safe Mode option. He immediately went the same configuration screen. I left it again for 4 hours, but no change. What should I do?

The laptop is a HP tablet PC.

Here's how to uninstall the ones you don't want.

And how to change the settings of update and IE8 HIDE update!

Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

> then click the one that you don't want > uninstall will appear at the top > uninstall it.

In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

> or if you do not need an individual > right-click on > UAC prompt > hide it

See you soon.

Mick Murphy - Microsoft partner

Windows Vista home Premium update error

I continually get an error Code 80080005 when you try to update windows. How can I go about fixing of this please?

Hi lepaknitram,

Thank you for using Microsoft Vista answers Forum.

Try the steps mentioned below:

* Copy / paste commands in a Notepad and save the file as "Resolution.bat" on your desktop below.
Run the file to run the commands.

ipconfig/flushdns
CD %windir%\System32
del /s *.chk; *.RIP; *.tmp; ~ *. *
msiexec/regserver
Start msiserver sc config = auto
net stop msiserver
msiexec /unreg
msiexec/regserver
regsvr32 /s msi.dll
regsvr32 msihnd.dll/s
net start msiserver
regsvr32 c:\windows\system32\wuaueng.dll/s
net stop wuauserv
CD /d % windir %
rmdir /s /q c:\Windows\SoftwareDistribution
net start wuauserv
departure of eventlog sc config = auto obj = Localsystem
net start eventlog
regsvr32 qmgr.dll/s
regsvr32 qmgrprxy.dll/s
SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
regsvr32 c:\windows\system32\wuaueng.dll/s
SC tisb wuauserv
D:(A;;) CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
start wuauserv sc config = auto obj = Localsystem
net stop wuauserv
SC config bits start = DEMAND obj = Localsystem
net stop bits
regsvr32 msxml.dll/s
regsvr32 msxml2.dll Kbps
regsvr32 msxml3.dll/s
regsvr32 msxml4.dll /s
regsvr32 qmgr.dll/s
regsvr32 qmgrprxy.dll/s
regsvr32 c:\windows\system32\muweb.dll/s
regsvr32 /s winhttp.dll
regsvr32 c:\windows\system32\wuapi.dll/s
regsvr32 c:\windows\system32\wuaueng.dll/s
regsvr32 wuaueng1.dll/s
regsvr32 c:\windows\system32\dllcache\wucltui.dll/s
regsvr32 c:\windows\system32\wups.dll/s
regsvr32 wups2.dll/s
regsvr32 wuweb.dll/s
net start wuauserv
net start bits
sc = auto config cryptsvc start
net stop cryptsvc
rmdir /s /q %windir%\system32\catroot2
regsvr32 cryptdlg.dll/s
regsvr32 cryptui.dll/s
regsvr32 dssenh.dll/s
regsvr32 gpkcsp.dll/s
regsvr32 initpki.dll/s
regsvr32 mssip32.dll/s
regsvr32 sccbase.dll/s
regsvr32 softpub.dll/s
regsvr32 slbcsp.dll/s
regsvr32 rsaenh.dll/s
regsvr32 /s winhttp.dll
regsvr32 wintrust.dll/s
net start cryptsvc
cd\
sc config = ose start request
net start dare
regsvr32 qmgr.dll/s
regsvr32 qmgrprxy.dll/s
regsvr32 es.dll/s
output

* After the execution of commands, try to perform a Windows Update, if you are still having the same problem, then:

First, please check that there is no any third-party firewall preventing Windows Update to communicate with "update.microsoft.com.

* Check if Windows Firewall is blocking the update of Windows.

* I suggest you to disable Norton and Windows Defender as well, because sometimes there are opportunities to Windows Defender blocks the Windows updates.

Please see the following article for connection errors:
http://support.Microsoft.com/kb/836941

836941. you may encounter temporary connection errors when you use Windows Update or Microsoft Update to install updates

Let us know if it helps.

Thank you and best regards,
Clement Kumar.

Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

My computer has an operating system of windows vista Home premium 64-bit. When I try to get updates, there is a message error code: 8000-ffff. How to solve this problem?

My computer has Windows Vista Home Premium 64 - bit operating system. When I try to get updates, there is an Error Message Code 8000 ffff. How fix/resolve this problem?

Error when you download updates using Windows Update or Microsoft Update: 8000FFFF
http://support.Microsoft.com/kb/946414

How to reset the Windows Update components?
[Launch the difficulty mode by default and aggressive , if necessary]
http://support.Microsoft.com/kb/971058
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Problem with Windows Vista Home Premium SP2 do not update, will be upgraded to Windows 7 fix this?

I have Windows Vista Home Premium SP 2 with 32-bit. I have problems with the download of updates and with it closing. I want to know if I upgrade to Windows 7 If this will fix my problem. If so, where do I need to buy. Thank you

Hello

upgrading operating system does not always solve the problems.

You can take the problems with you

see if that helps to fix:

How to reset the Windows Update components?

There is also an automatic 'fix - it' here

http://support.Microsoft.com/kb/971058

Also, try to put the KB numbers in the search on the link below and then manually download the

http://www.Microsoft.com/downloads/en/default.aspx

or repost in the correct windows update forum

and include the kb numbers update and error codes

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

For more information windows 7

Windows 7 upgrade advisor

http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

Windows 7 upgrade paths

http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

Windows 7 forums

http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

Answers by topic

KB2296011 causes the blank screen in Windows Vista Home Premium?

I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.

I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.

I did the following to troubleshoot:

(1) I tried to install the system update tool, which had no effect.

(2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.

(3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.» This service cannot be started in Mode safe. »

It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.

OK, it looks like at this will be my last post.

This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.

It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.

I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.

I hope that all of this novel, we have written here will help others as well.

Why can not download and install updates from Windows Vista Home Premium 32 bit?

Why can not download and install updates from Windows Vista Home Premium 32 bit?

Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

WinVer the OS details appear. If no SP1, download & install it

https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

Use this link for download.

http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

Microsoft.

Why Windows Vista Home Premium 32-bit installs not Windows updates?

I am not able to download and install Windows Vista Home Premium 32 bit windows update. This Gateway laptop has always been able to quickly and easily install the update by clicking windows update. However, since the introduction of Windows 10 it has been a lot of your time trying to install updates. I had this same problem with Windows 7 too. Never before there was no problem for the two operating systems. Installation of Windows updates has always been easy and fast without any problem. Running the troubleshooting isn't good and hunting error codes has been unproductive. What the hell is happening?

Hi Joe Cool1:

'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems. The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.

There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista. The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.

You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/. Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.

------------
32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. Or running fixit is. How updated?

I have windows vista Home premium 64-bit installed on my sony vaio cs36gj, which was not install updates. \niehter is running thing fixit. How updated?

Hi Vishal,

1. what happens when you try to install Windows Update and the fix, you get any error message or error code?

2 have you made changes on the computer before this problem?

3 is the limited issue during the installation of specific updates?

Problem when installing windows update, see the following Microsoft article.

Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2: http://support.microsoft.com/kb/2509997

Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services: http://support.microsoft.com/kb/906602

Notes:

The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

Back up the registry: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

CHKDSK: Data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

Microsoft safety scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.

Keep us informed on the status of the issue.

I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

original title: error code 80070005

Help us help you: start by reading this post 'sticky '...

What information to post in the Windows Update forum
http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

Windows Vista Home Premium SP1 - multiple windows program or service failures after Windows Update June 17, 2011

I have Windows Vista Home Premium SP1 (I think that SP1 anyway). Last night June 17, 2011, update of Windows installed an update or updates. Now, Windows Explorer, Internet Explorer, Windows Installer, Windows Sidebar, Panel, Windows Update and other Microsoft programs all fail. I get messages with various error codes. A message is 'class not registered '. I tried a restore to a previous restore point, but apparently the only restore point is the one made after the update. What can I do here? I know that I can always restore the factory image (Dell), but I'd rather not if I can help it.

Hi doc,

Method 1:

You can try to repair aStartup if it is included in the system recovery options provided by the manufacturer of the computer or start from the disc for Installation of Windows Vista.

Startup Repair: frequently asked questions

What are the system recovery options in Windows Vista?

Method 2:

Alternatively, you can try to start a disk check and check.

You can view the following link to perform a disk check:

Check your hard drive for errors

Note: When you run the disk check, there are chances of losing data if you can take a backup of important data before you run checkdisk.

Hope this information is useful.

If I use at any time update in windows vista home premium upgrade to complete, I need a Windows Vista Ultimate key to activate too?

If I use at any time update in windows vista home premium upgrade to complete, I need a Windows Vista Ultimate key to activate too?. Please answer

Yes.

You will need to BUY a Vista Ultimate Upgrade product key/license disk

Windows Anytime Upgrade Vista is no longer available; which you always had to pay anyway...

Try to buy Vista Ultimate Upgrade online: newegg, amazon, etc.

Alternatively, try your local computer store.

This isn't for free.

See you soon.

Mick Murphy - Microsoft partner

my computer acer have windows vista Home premium and I install Grand update pak2 and remained in safe mod can somebady help me

my computer acer have windows vista Home premium and I install Grand pak2 and hestay update in safe mod somebady can help me

https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

Microsoft free support for Vista SP2 at the link above.

See you soon.

Mick Murphy - Microsoft partner

Update in Windows Vista Home Premium to Vista Ultimate

Hi all

I'm trying to upgrade my windows Vista Home premium to ultimate and I have the original CD for the ultimate, but when I put the CD and to upgrade it won t upgrade and it gives me this message:
"- The upgrade cannot be started. To upgrade, cancel the installation and choose it to upgrade to a version of windows that is newer than the version you are currently using. »

And my computer is up to date so I put t understand is something to play or I have to install a clean version of windows Vista?
And if I have to install a clean version anyway to install windows without deleting my documents?
Hope someone will help me :D
THX

H,

If you perform a new installation that will be wiped all files, you must back up your documents and other members of staff.

Windows Vista (Home Premium) - updated this a blank page

Similar Questions

Maybe you are looking for