Windows vista home recharge

  • crashend of the computer and I lost everything... had to reload windows with the cd that CMAF visa with my oc, and cd of dell to get the base of dos programs.
  • now, Miss me essntial programs Windows and the drivers who made my pc working correctly and have no idea how succesfully reload windows to recover all my stuff... pc is slow, many crashes and can barely operate... im not tech savy, but not completely lost... any help would be a godsend

Dell recovery options:

http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

Above is Dell to reinstall Vista from the DVD on your computer.

http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

And that way if you have a recovery partition on your hard drive.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

All other programs reload CD/DVD or download on the Net.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • To recharge without OS cd on laptop TOSHIBA preloaded Windows Vista Home Premium.

    I have TOSHIBA laptop preloaded with Windows Vista Home Premium. Maybe I need to reload the operating system. Supply did not have CD of Vista. Key is given on laptop. How do I access the OS to recharge? A recovery disk is provided. Does include the OS?

    I have TOSHIBA laptop preloaded with Windows Vista Home Premium. Maybe I need to reload the operating system. Supply did not have CD of Vista. Key is given on laptop. How do I access the OS to recharge? A recovery disk is provided. Does include the OS?

    Hey Bireshwari

    a vista recovery disc you already have is one of the ways that you normally use on a preinstalled vista machine to reinstall

    you start from the recovery disk

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    If this is not the good disk read this information below

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    Save all data, because it will be lost, do the above

    Walter, the time zone traveller

  • lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

    Question
    better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
    Details

    In current versions of Flash you can also do this via the control panel.

    • Control Panel > Flash Player, click on remove and erase data
  • Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

    Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

    According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

    "You must update the following plugin:

    • Adobe PDF plugin for Firefox and Netscape 8.2.6
    1. Check your plugin versions on one of the following links:

    2. Update of Adobe Reader (PDF plugin):
      • Within your existing Adobe (If you have already installed) drive:

        • Open the Adobe Reader program in your list of programs
        • Click Help > check for updates
        • Follow the instructions to update
        • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
      • Download the full installer (If you have NOT installed Adobe Reader):
      • After installation, launch Firefox and recheck your version.
  • Update in Windows Vista Home Premium to Vista Ultimate

    Hi all

    I'm trying to upgrade my windows Vista Home premium to ultimate and I have the original CD for the ultimate, but when I put the CD and to upgrade it won t upgrade and it gives me this message:
    "- The upgrade cannot be started. To upgrade, cancel the installation and choose it to upgrade to a version of windows that is newer than the version you are currently using. »

    And my computer is up to date so I put t understand is something to play or I have to install a clean version of windows Vista?
    And if I have to install a clean version anyway to install windows without deleting my documents?
    Hope someone will help me :D
    THX

    H,

    If you perform a new installation that will be wiped all files, you must back up your documents and other members of staff.

  • HP PSC 2355 all-in-one: HP PSC 2355 will not recognize Windows Vista Home Basic

    I bought this product in 2005. I'm just out of the box yesterday. The printer works fine. The software CD was made before Windows Vista Home Basic Edition. He acknowledges only 98, Me, 2000 and XP. He calls a Unknown600 to Vista. Is there a driver or other update I can use? Thank you.

    Hi @Mc_Cool,

    Welcome to the HP Forums!

    I noticed that you are looking for a basic Windows Vista Home Edition driver for your HP PSC 2355. I'm happy to help you!

    You can download the driver directly using this link, HP full feature software and drivers.

    Hope this is what you are looking for and have a great day!

    "Please click the Thumbs up icon below to thank me for having responded."

  • Problem reloading Windows Vista Home Premium

    I'm trying to reload Windows Vista Home Premium on my Dell laptop (32 bit).  When I try to install I get the message that says "computer lacks of enough space for temporary files - at least 405 MB is required on any partition" error Code 0x80004005.  I have about 70 GB of available.  I can't go beyond that!

    Hello

    FYI, this forum is only for HP products. If you have a problem with another product from another manufacturer like Dell, you need to try to contact their support team or the official web site of the forum.

    Please try to contact here: http://support.dell.com/support/index.aspx

    Forum: http://en.community.dell.com/

    I hope this helps.

     

    !------------------- Please click on the star of CONGRATULATIONS on the left to say 'thank you '. Check the box "Accept as Solution" if she answers / solves your problem. Thank you-----------------------------------------------------------------! 

    I am an employee of HP.

  • Serscan.sys missing on Windows Vista Home Premium 64-bit when you try to install Office Jet Pro 8600

    Is there a place to find serscan.sys on a laptop Toshiba Satellite A305, running Windows Vista Home Premium 64 bit?  My Installer to connect wireless to a new HP Officejet Pro 8600 wireless all-in-one printer-scanner-copier-fax machine tells me to find this program, but I can't find it on my hard drive.  I received no installation CD of Windows Vista with this computer when I bought it new.  Any help in finiding or serscan.sys getting and get the printer installed and running is greatly appreciated.

    Hi Excompost,

    Follow the steps outlined in the document below. Let me know what you find?

    Installer Serscan.sys file not found when installing network

  • HP Compaq d530 SFF DIMMs do not recognize. Windows Vista Home Premium 32 bit - BIOS version 02.44

    Hello HP community!

    I recently got a HP Compaq d530 SFF of the company, where I had my work experience.

    Fortunately, I took their offer and took the PC at home, everything was going well until I bought myself some new DIMM from ebuyer.com.

    I again for a fact, the computer must DDR 333 MHz, PC2700 and it must be in DIMM format, so I went and bought 3x1Go modules. A few days later they arrived and I have them inserted in the computer, ensuring that two DIMMs was in blue locations and others (I wanted to keep a 256 MB module to) in the black sites.

    I have re-inserted power cable and tried to boot the PC, he showed me a BIOS message, showing that the amount of memory has changed, since the last boot. Once the configuration is presented, he acknowledged only the 256 MB module. I then turned off the computer, and then remove the 256 MB module, to see what would happen. So, I restarted the PC, and it gave me an error (not shown) tone. To which I then tried (needles) each DIMM different to see if one of them was vice. They are all gave me the same error tone. Since then, I've been running Windows Vista Home Premium, with 1 GB (4x256MB DIMM).

    Maybe someone has a suggestion how to fix this?

    I've already updated the version of the BIOS at 02.44 (later I could find).

    Thanks in advance!

    Yours sincerely Simon Cahill

    Beatsleigher,

    Not all memory is the same, even when picking PC2700. Did you buy non ECC?

    Here is a guide on the configuration of the memory for the D530SSF

  • Can I get a restore CD from HP for my Windows Vista Home Edition?

    My hard drive crashed. It is in a Compaq Presario SR2150NX PC running Windows Vista Home Edition,
    that was pre-installed. I do not have the installation diskettes; but I do not have the sticker
    always on the side of the computer that has the product key. The player does not even start.
    It is quite dead. If I buy a new hard drive and install in the machine, will I be able
    to get a disk of software to replace Microsoft or HP for Vista Home operation
    No fees + port, of course, since it is a genuine copy of Vista system? I still have
    have purchase receipts original for computer, indicating the serial number, etc..
    Sorry, I'm not computer savvy and don't know how everything works. I would of course
    Appreciate any help in recovering my Vista. The error I get on my screen that says: "Reboot and".
    Select proper boot device or Insert Boot Media in selected boot device and press a key"

    Frank post replacing > you can order a disk recovery for $27 the value of ComputerSurgeons.com .

  • Windows Vista Home Premium update problem step 3 of 3-100% complete

    My Windows Vista Home Premium began the automatic update, reached the point of view "Configuring updates: stage 3 of 3-100% complete.". Do not turn off your computer. »

    Now he's just running for hours with this screen showing...

    I can't say if this update will end finally alone, or if there is a problem and I should just reboot.

    How long should I wait before abandoning me and shut down the computer?

    Thank you.

    Hi JIB1955,

    Thank you for visiting the forums of answers.microsoft.com.

    It's been a while, we can think that the update is stuck and will not continue any further.  You can press Ctrl, Alt & Del and open Task Manager.  You should see the update on the Application tab, and you can select it and press end task.
    Click on the start ORB > Control Panel > programs and features, on the left, select view installed updates and see if the update that was being Setup finished installing.  If it does not have and does not appear on the list, you can restart your computer and try to install the update mode without failure.

    To do this, restart your pc and even if your pc is booting press the key F8 on your keyboard to enter the Advanced Boot Options menu.  On the Advanced Boot Options menu, select Safe Mode and press ENTER.
    Your computer will boot mode safe by using only the basic drivers and services, hopefully allowing Windows Update to complete the installation of the update, you are having problems with.

    Please let us know if you make any progress this way

    Kavita M
    Microsoft Answers Support Engineer
    Visit the Microsoft Answers Feedback Forum site
    and let us know what you think.

  • Where can you buy CD to the Windows Vista Home page?

    Whear you can buy CDs in the Windows Vista Home page

    I have win 7 allredy but I want vista

    Your choice of course, although I think you make a serious mistake. You can get it on Amazon.com

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

    I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

    worm post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    One thing you can try try the system restore, safe mode.

    Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

    To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

  • where can I get the service pack 1 for windows Vista Home Basic. My media windows palyer will not play DVD with it. I can not get a decoder installed without the service pack. Please help__

    Where can I obtain service pack 1 for windows Vista Home Basic

    Where can I obtain service pack 1 for windows Vista Home Basic

    Hey electric7422

    Click Start then right click on computer

    then left click on properties

    It will tell you if you have a 32-bit version or 64-bit vista

    links below have downloads the standalone vista service Pack 1 for each bit version

    the 32-bit version

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en

    the 64-bit version

    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=874a414b-32b2-41CC-bd8b-d71eda5ec07c&displaylang=en

    Walter, the time zone traveller

Maybe you are looking for

  • Bug of the MacBook Air

    My Macbook Air just completely buggy. I was working on a project on Word and it kind just frozed. I can't get out of Word, I can't save my project. I can't close my laptop yet. There is nothing on the keyboard that works. What can I do? Can someone h

  • Satellite A60-122 turns off immediately

    Hi there, my 2.5 year satellite SA60-122 turns off no aparent reason.Sometimes after 10 minutes and sometimes after 3 hours. Why o why? Does anyone have an idea? Thnx a lot. Edwin

  • What is - this app Microsoft Account for?

    "After several codes and registrations by e-mail, I finally have this app and on the door, he said:" there is no application that need your approval. " What does that mean?

  • Color in PS CC settings

    I use an iMac, mid 2011, worm 10.11.6 and current CC of PS. My working color space is Adobe RGB (1998).  When I open a photo for the first time that has no associated color profile or has a different color profile to the Adobe RGB 1998 and during the

  • Adjustment elements 14 tool

    Hi.I have recently bought 14.I, m elements trying to create a watermark on my photos. For instructions for this, he said to cut the exess using the adjustment tool under the drop down image. It does not appear there where is it so please thank youDav