Windows vista keeps installation device HD Audio drivers not suitable for my card driver package...

Similar Questions

• Windows Vista keeps in hibernation

  Windows vista keeps in hibernation, and then will not come out of it. The mouse will not respond not despite the fact that the tower is still. What should I do?

  Hello

  Troubleshooting Windows Vista sleep and extended
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
  type of hibernation - see turn Hibernate on / off

  May need to reset all to default power settings and then place back as you prefer.

  I hope this helps.

• Windows Vista (TM) Build 6002 this copy is not genuine.

  Computer says my Windows is not genuine, but I know that it is.

  Windows Vista (TM) Build 6002 this copy is not genuine.  I have this system for 3 years and I've been using windows vista as long.  I just returned from a week's holiday and when I turned on my CPU that's what I found... Help
  I tried to re - install, but they keep saying so much on my drives product codes are wrong and the one on my CPU is false.  I have had no other problems, funny, I stopped for a week and it happened.

  Any help will be great... new semester starts soon and I need my job

  License data-->
  C:\Windows\system32\slmgr.vbs(1000, 9) (null): catastrophic failure
  The foregoing is the cause of your problems.

  I've not seen this exact error before, but I think the following should help - or at least shed a little more light on the problem.

  Please try the steps below to re-create the license with the correct data store.

  (1) open an Internet browser window.
  (2) type: %windir%\system32 in the browser's address bar.
  (3) find the CMD.exe file
  (4) make a right click on CMD.exe and select "Run as Administrator"
  (5) type: net stop slsvc (it may ask you if you're sure, select Yes)
  (6) type: cd %windir%\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing
  (7) type: Rename tokens.bar tokens.dat
  (8) type: cd %windir%\system32
  (9) type: net start slsvc
  (10) type: cscript slmgr.vbs - FLIR (it may take time for this will be complete, please be patient)
  (11) restart your computer twice.

  You may need to enter your COA key and activate it.
  Once complete, run another report MGADiag and post back with the results

• My computer Windows 10 acknowledges IOS devices. ITunes will not.

  My computer Windows 10 acknowledges IOS devices. ITunes will not. I tried to start and stop the service. I uninstalled I Tunes and reinstalled. I tried different cables and USB ports. Always I Tunes none of mu IOS devices recognizing. It worked fine 2 days ago?

  Make sure you run the latest version of iTunes available at itunes.com/download

  The current version is 12.5.1

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• I can't get into my Facebook account with my Windows Vista. He said: this feature is not available.

  * Original title: Facebook

  I can't get into my Facebook account with my Windows Vista.  He said: this feature is not available.  I have the right account & password, but cannot open a session.

  Of https://www.facebook.com/help/105487009541643

  • Review known connection problems for troubleshooting tips and more information about specific connection problems.

  If the troubleshooting tips above don't resolve the issue, download the help to recover your account.

• Do I need another new Windows Update to activate my Windows Vista to access the free secure recommended downloadable program for downloading various files and any other information you want?

  Original title: I need an another new Windows Update to activate my Windows Vista to access the downloadable recommended secure free program for downloading various files and any other information you want? Thank you! Randle

  Please help if you have the time giving me the name of a free secure downloadable software that works for Windows Vista, when the word is not on my PC for

  downloadind attached to power open, save, display, print and other means that this downloadable can help. I would be very grateful for your help! I works but not Word and PowerPoint if you have any suggestions that will be very solve my delimma of not be able to successfully download these things I just Gillies

  Your expert advice, patience, attention to my request, time, are all valuable and appreciated! Thanks again and have a wonderful day! Randle

  Hello Randle,

  You can use your favorite search engine & download any third-party software that might be used to.

  
  Note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there.

  Hope the helps of information.

• Problem burning DVDs. "Error in device - device target is not suitable for use.

  Hi all

  Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.

  Just thought it was important to note the success, but also failure!

  However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.

  After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.

  I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.

  Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.

  That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.

  So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?

  I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.

  Justin.

  Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.

  Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.

• The device, \Device\Harddisk2\D, is not ready for access yet.

  Event Viewer has many entries of error ID 15, which States:
  The device, \Device\Harddisk2\D, is not ready for access yet.

  What does that mean?  Is this an indication of imminent drive failure?

  Hello

  ·         Did you of recent changes to the computer before the show?

  Method 1: Check that all connectors (power and IDE) should be firmly fixed. Disconnect and reconnect to check.

  Method 2: As short-term solution, try to shut down the system, turn the power off, turn on the power and restart. If the device still does not work then it is probably a problem of material, the device or card/main controller card (or possibly the cable connection) will need to be replaced. If the device seems to work then this indicates a problem of software or firmware. Do not forget that the problem can recur again unless the root causes addressed.

  Method 3: Update the latest version of the device driver (if there is one).
  Check on the Web site of the vendor for a newer driver and if it is available then load it.

  Reference: http://support.microsoft.com/kb/283658

  Method 4: Enforcement Procedure in Windows XP check disk errors

  http://support.Microsoft.com/kb/315265

  CHKDSK warning:

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Creation of Raw Device Mapping (RDM) is not supported for local storage (1017530)

  "Often, localstorage devices do not support VPD page 0x83 and can therefore be used for Raw Device Mappings (RDMS)." The content of the page 0x83 is used as a unique identifier for the device. For more information, see creating Raw Device Mapping (RDM) is not supported for local storage (1017530). »

  Does anyone know if this is even the case for modern storage?

  We are a dell shop, wishing to take advantage of the ability to create up to 64 TB RDM.

  However, the storage of the host in question will be local SAS only.

  Prefer not to have to merge muliple 2 TB VMDK into windows to make a record of 4.5 to.

  Then projected on the presentation 1 x 4.5 CT rdm

  If you plan to use a SAS controller, you should be able to do this. Your drive will be identified as a device of the naa, and you will be able to add as an RDM to VM - only with ESXi 5 (which can support more than 2 TB LUN).

• Error when burning DVDs in pre 8.0 "target error device - the device is not suitable for use.

  I'm trying to burn a dvd in first elements 8.0 but after 96% iam getting this error:

  "device target error - the device is not suitable for use.

  I tried all these steps according to this link: http://kb2.Adobe.com/CPS/515/cpsid_51553.html .

  System configration:

  Win vista 32 bit.

  Processor: Amd athlon 64 dual core 2.60 GHz.

  RAM: 3 GB

  Graphics card: nvidia geforce 6150 is.

  Model number of camcorder: JVC gz-hm320.

  Format: .mts

  Image size: 1920/1080

  Frame rate: 29.97.

  

  Please look at this problem.

  Concerning

  Manoj Khati

  Here are the search results for your error: http://forums.adobe.com/search.jspa?q=device+error+target+device+isn%27t+suitable+for+use& resultTypes = MESSAGE & dateRange = all & communityID = 3271 & username = & numResults = 15 & rankBy = 10001

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

• Clean reinstallation of Windows Vista on a Latitude E6500 - what drivers?

  I am trying to wipe my Latitude E6500 & reinstall Windows Vista Home Edition. Have managed to install Vista, I am stuck at the part of the driver installation. Everything I read says I need to install the drivers for the chipset first. When I plug my Service tag on the page number drivers & downloads on the Dell Support website, there are 2 recommended drivers for the chipset - Intel AMT HECI, v.4.2.30.1040 PV, A03 & Intel AMT GROUND / A03 LMS, PV v.4.2.30.1040,. How can one to use?

  Hi dhjaffe,

  You can install both/all drivers from the chipset available for your service tag. There is no harm in it. Also here is the order in which the pilots should ideally be installed.

  Driver or application name	Category	What it does
  1 Dell System Software	System utilities	Provides critical updates and patches for the operating system.
  2 chipset driver	Chipset	Help Windows components control the map system and controllers, such as the USB ports and other internal components.
  3 PCMCIA and smart card drivers	Security	Measure of capacity of slot PCMCIA and smart card.
  4. Intel Matrix Storage Manager	Serial ATA	The Intel storage driver is only applicable to the Intel chipset computers.
  5. audio driver	Audio	Activates and enhances the audio controller.
  6 video driver	Video	Improves video performance.
  7. ethernet drivers or network interface card	Network	Improving internet access network or network controller.
  8. ControlPoint System Manager, Manager of ControlPoint and ControlPoint Connection Manager security  Note: This driver is required for some Latitude laptops, and depending on your system configuration, you do not have to install all three parts.	Control point	The Dell ControlPoint (DCP) controls the management of food for some Dell Latitude laptops. ControlPoint System Manager monitors the management of food and ambient light sensor settings, controls ControlPoint security features Security Manager and ControlPoint Connection Manager control wireless connection profiles.
  9 Dell Quickset	Application	Controls power management and ambient light sensors.
  10. wireless network drivers	Network	Activates and enhances the wireless network controller.
  11 Bluetooth drivers

  Note: If this driver is not available, then your computer does not have Bluetooth compatible. Continue to the next on the list driver.Network Controls and allows Bluetooth connectivity. 12 mouse, keyboard, touchpad and drivers for input devices Mouse, keyboard & input devices Enhances the pointing device features. 13 Intel AMT or vPro (if available) Chipset Improves the manageability of the system. 14 drivers wireless card Dell mobile broadband (if available) Network Allows wireless connectivity to broadband. 15 drivers modem (if available) Modem/Communications Allows dial-up capabilities. 16 Dell Digitech touchscreen driver (if available) Mouse, keyboard & input devices Allows you to enter key screen on some Dell laptops.

  Hope this helps

• Windows Vista keeps rebooting while updates of finishes

  I installed new updates and restarted my computer, then he said updated configuration: 3 3 and whenever he always says 0%, then keeps on rebooting, I tried all of the safe mode options, and the last time that I started it normally upward, it syays impossible to install updates, I press ok then it's all over again. I can't return to windows because if this. I had problems with 3 of my PC, download of updates in the last two days.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista SP2 installation error loop (x 64) 0xc0190036 error number

  Hello, after installing SP2, I constantly make the same mistake, the bad thing is, insteath to back off, the SP2 update keep trying on and again and again to change the file that contains an error (file checks! error 0 x 00190036 mshtml.tlb!).
  now... I think that microsoft really screw them this time, because the installation program runs in any mode of windows, that is to say, cannot go to safe mode to attempt to recover from there, it's just again ONCE the attempt to install the sloppy SP2, restart the computer does nothing, as the update again will activate itself , so I always end up stuck in this part of the file with this error code mshtml.tlb (it continues to blink constantly as his try again and again access the file)

  Specs: Windows Vista SP1 Ultimate x 64
  GA - X 48 - DS4
  Q6600 @ 3 Ghz Kentsfield.
  4 x 2 GB (8 GB ddr2 800 Mhz)
  Sapphire Hd 3870
  2 x Western Digital Caviar (500 + 160 Gb) + Seagate 250 GB
  Sound Blaster Audigy 2 Zs

  Previous mistakes: I could never install IExplorer 8, it still reported a similar error, but with the ieunit file (don't remember the exact file currently extension)

  so the question is: will there be a fix for this problem? or do I just simply restore and try to recover manually in the hardway (Ie, run the Vista cd repair tool)
  im not wanting to use the repairtool, because he already ruined an once installation after a poor pass from windows update.

  * edit *.
  just to correct the incorrect error code, the correct error code reported is: 0xc0190036

  Sometimes the error is then replaced 0 x 0190002 then 0xc0190005 when stopping down.

  Note that I am on windows vista ultimate SP1 x 64 = programmer Noob =-

  Hi Tamalero,

  You got the error message indicates that mshtml.tlb is damaged and there is one possibility of other files system is corrupted as well. All what we need to do is to rename the DLLs corrupted, restart the computer and let start the computer normally to complete the installation. Follow these steps to rename the corrupted dll file.

  (1) Insert the windows vista dvd and boot from the dvd.

  (2) select repair your computer.

  3) click on command prompt

  Type the following commands and press ENTER after each line

  C:

  CD windows

  CD system32

  Mshtml.tlb.old mshtml.tlb Ren

  (4) output from command line

  (5) restart the computer and boot up normally

  If you GET the black screen with a similar error and one different (other than mshtml.tlb) file, make a note of the dll file, repeat steps 1 to 5 and type the name of the file in step 3.

  Restart the computer. It may take a while and you will be asked to connect to the desktop computer.

  Check in system properties if SP2 is installed.

  I hope this works. If you still have problem please do after back...

  Thank you.

  Hi error_counter here:
  do a "repair" is only starting problems, and once they are solved, the problem persists (mshtml.tlb error)
  I tried to remove this file, but then the error from 0xc01900036 at 0 x 000034
  so I'm stuck again, I don't know why the file mshtml.tlb is really important to "detect" If service pack updates it anyway.

  and like I said, even though vista windows SP1 supposedly has DONE a system restore point, no system restore points were detected by the dvd (one of the things that I hate about Vista than their restore points are a draw, and you can get by no unnecessary work anytime..)

  the thing which allow me to return back to SP1 followed the instructions of another post here, related to the error 0 x 000034 in this forum but for SP1.
  I went to the c:\windows\system32 directory and renaming of software files, security, SAM and default and replace them with copies of the REGBACK folder in system32\config
  It could back me to SP1, unfortunately a quirk stuck me then in an infinite "configuration updates 3 of 3" forever time it boots (it restarts itself after a few days). and had to delete pending.xml file

  That did the trick... for now, since everything appears to be damaged (I can use the program and the work very well, but no file windows update will not work).
  SFC detects inconsistencies but he did not get to 100%, it stops at 34% saying it had problems and "could not perform the requested operation."
  I also tried different microsoft tools. as the URSCheck and he only says: "this update does not apply to your machine.

  so I guess my whole installation is really really corrupt (and makes me really hate Vista more reason, until now almost all my facilities or computers other people that contains vista, are full of mistakes or quirkcs diferent that prevents normal use.)

  so Im trying to install Windows 7 in another partition and Im thinking in whiping it that soon everything is installed there.

  -= Noob programmer =-

• Windows Vista keeps crashing with blue screen errors when I play

  My windows is crashing for some reason and I can't understand what it is, I have everything updated, the error is as follows:

  Problem event name: BlueScreen
  Versão SO: 6.0.6002.2.2.0.768.3
  Region ID: 2070

  Peruano problem details:
  BCCode: 116
  BCP1: 87CDC250
  BCP2: 8FE2EAFA
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Records strategies help the problem:
  C:\Windows\Minidump\Mini081312-01.dmp
  C:\Users\Badnature\AppData\Local\Temp\WER-108623-0.SysData.XML
  C:\Users\Badnature\AppData\Local\Temp\WERB588.tmp.version.txt

  Leia a nossa privacidade declaracao:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0816

  I'd really aprecciate help, thank you for your time

  Hello

  The basic definition of a bugcheck 0 x 116 is:

  There may be a bug in the video driver or video material.

  So I would now explain what means VIDEO_TDR_ERROR. Firstly, TDR is an acronym for Timeout detection and recovery. Detection time and recovery was introduced in Vista and carried over to Windows 7. Rather than exactly what detection time and recovery did exactly, I'll just quote the MSDN article!

  Timeout detection:

  Planner of the GPU, which is part of the DirectX Graphics kernel subsystem (Dxgkrnl.sys), detects that the GPU takes more than the amount of time to perform a particular task. The GPU scheduler then attempts to anticipate on this particular task. Preempt is a timeout 'wait', which is the actual time of TDR. This step is the detection of delay of the process phase. The period of default timeout in Windows Vista and later versions is 2 seconds. If the GPU cannot complete or anticipate the current task period TDR, the diagnostic operating system that the GPU is frozen.
  To avoid detection of timeout to occur, hardware vendors should ensure that graphics operations (i.e. buffer DMA completion) will not take more than 2 seconds in scenarios such as productivity and the game to the end user.

  Preparation for recovery:

  The operating system GPU Scheduler calls the function DxgkDdiResetFromTimeout of the miniport driver of the display to inform the driver that the operating system detected a timeout. The pilot must then resets and reset the GPU. In addition, the driver must stop access to memory and go not material. The operating system and the driver collect material and other State information that might be useful for post-mortem diagnosis.

  Recovery of funds:

  The operating system resets the State appropriate graphics stack. The video memory manager, which is also part of Dxgkrnl.sys, serving all allocations of video memory. The miniport display driver resets the State of the GPU hardware. The graphics stack takes the final steps and restores the receptive office. As mentioned previously, some older DirectX applications could make only in black at the end of this recovery, which requires the user to restart these applications. Well-written 9Ex, DirectX and DirectX 10 and subsequent applications which manage peripheral technology delete continue to function correctly. An application must release and then recreate the Direct3D device and all the objects in the device. For more information on how get the DirectX applications, see the Windows SDK.

  Article here.

  That being said, if the detection time and recovery fails to retrieve the display driver, it will then pull the bugcheck 0 x 116. There are many different things that can cause a 0 x 116, which I'll explain below:

  The following hardware problems may cause a TDR event:

  1 unstable overclock (CPU, GPU, etc.). Return any overclocks to stock settings.

  2 bad sector in memory, resulting in corrupted data is communicated between the GPU and system (memory video, otherwise known as VRAM or physical memory, also called RAM).

  GPU tests: Furmark

  RAM test: Memtest86 +.

  3 corrupt hard drive or install Windows / OS install resulting in corruption in the registry or the page file.

  HARD drive Diagnostics: http://www.carrona.org/hddiag.html

  To reset your swap file, follow these steps:

  (a) go to start... Run... and type "sysdm.cpl" (without the quotes) and press ENTER.

  -Then click on the Advanced tab.
  - then the Performance Settings button.
  - then on the tab advanced following.
  -and then click the virtual memory button.

  (b) in this window, note the current settings of your swap file (so you can restore them later).

  -Then click on the option button "No paging file", and
  - Press the Set"" button. Don't forget, if you have several hard drives, make sure that the paging file is set to 0 on all of them.
  -Click OK to exit the dialog boxes.

  (c) restarted (this will remove the file from your system)

  ((d) then go back following the directions in step one) and re-enter the settings that you noted in step

  (b) follow the steps along the (and including) the reset.

  (e) once you have restarted this second time, go back and make sure the settings are as they are supposed to be.

  Run the System File Checker:

  SFC. EXE/SCANNOW

  Click on start and type "cmd.exe" (without the quotes)

  At the top of the search box, right-click on the cmd.exe and select "Run as Administrator"

  In the black window that opens, type "SFC. EXE/scannow"(without the quotes) and press ENTER.

  Let the program run and after return what he says when it's done.

  -Overheating of the CPU or GPU and or other elements can cause 0 x 116 bugs. Monitor your temperature and ensure that the system is sufficiently cooled.

  -GPU failure. Whether the heat, power (PSU) issue, lack of VRAM, etc..

  The following software issues can cause a TDR event:

  -Incompatible drivers of any kind (two GPU, sound, etc)

  -Messy registry / corrupted

  -DirectX bad files (uninstall and reinstall DirectX)

  -bad system files (System File Checker - has been run on it)

  -Bad driver (some drivers will cause an event due to internal bugs, but they are not nearly as common as many think because of all the previous things, causing the same symptom) - (remove all 3rd party programs and make sure that are not load drivers. Then install only what you need 3rd party stuff and make sure it is the latest version).

  Kind regards

  Patrick