Windows vista Media Player

Similar Questions

• When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

  When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

  Hello, BGNG,.

  This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .

• Codec for my windows vista media player?

  Where can I find the correct codec for my windows vista media player? I can hear everything, just can't see anything.

  Hello

  1. have you made changes on the computer before this problem?

  2. What is the format of the video file you are trying to read?

  I suggest you to go through following Microsoft and check if it helps.

  Codecs: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  And also see the following Microsoft article.

  Play an audio or video file: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

  Hope the information is useful.

• Cannot read videoson Microsoft windows vista media player streaming

  original title player: media

  Cannot read videoson Microsoft windows vista media player streaming

  Hi Jose,

  1. what happens when you try to play a video stream?

  2. do you get an error message?

  Run the fixit available in the link below to check then if that makes a difference

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

• Windows vista Media Player will not play mp3 or wma files

  my windows vista Ultimate 64 player will not play any of my wma or mp3 files. said that I did not have the codex of right. but wma and wmv are windows. What's new?

  Hi rpwerner,

  Please use the forum for Support of Vista,

  This is a codec package from Microsoft you want to download to see if it will be useful.  Also, try to update your Windows Media Player and Windows Update to get the latest version of the codec required to play the type of media.

  You can also use your favorite search engine to look for codec packs available on the web to help you read the content.

  NOTE:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this helps,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can not extract music from a CD using Windows Vista media player 11.

  I have windows Vista... 32-bit. Recently I not was able to rip music CD to my computer using windows media player 11. I can always open and watch DVD movie. When I go and select Rip it just is there and nothing opens. He will play even not audible a CD. It is once again, only occurring not music videos.

  You can try the suggestions to http://support.microsoft.com/kb/982116 . Especially remove the drivers and then reinstall them can solve the problem. Tim Baets
  http://www.BM-productions.TK

  You can try the FIXIT from Microsoft to see if it will deal with your problem with no sound.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems/

  http://support.Microsoft.com/GP/NO_SOUND/

  I hope this helps.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• No sound in Windows Vista Media Player after you install updates to Windows Feb 2012

  Help, please. Feb 2012 updated windows installed without crahing but now I have no sound in windows media player 11. I downloaded the new codecs to cnet, but which did not set me. More trouble again – UGH!

  Hello

  Are you able to hear the sound of the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Race he difficulty of the link and check if the problem persists:

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:

  If the step above is unable to check if Windows media player is not muted in the volume mixer. Follow these steps to check:

  a. open Windows media player.

  b. click on the volume icon in the taskbar.

  c. click mixer.

  d. in the list of applications, make sure that the volume icon is not silent for your Windows media player. If he is silent, then turn it back on.

  e. check if the problem persists.

• Vista Media Player 11 won't play slowed down.

  Vista Media Player 11 won't play slowed down.  The controls on the tab improvements to play speed settings do not meet.  Any suggestions?

  Hello

  • Are you able to see the silder on Windows media player?

  This function will work only when you play the music.

  Some files are supported the display of an image at a time.

  1. Play the video file.
  2. Click the arrow below the now playing tab, point to enhancements, and then click play speed settings.
  3. In the enhancements pane, click the button of the next improvement until play speed settings is displayed.
  4. Do one of the following:
     • To move the video image of an attacker, click the next picture button.
     • To move the video image of a backward, click the previous frame button.
  1. To return to normal speed, click Normal.
  2. To hide the settings, click the close button in the enhancements pane.

  This should solve your problem.

• I was sent AIFF audio files. How to play on windows 7 media player

  When I received these AIFF music files, I searched on the net and he told me that they would not play on Windows 7 Media Player. They will not!

  How can I make them work. Help please!
  Thanks in advance!
  Greg

  Hello

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  All you need is good Codec

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  -------------------------------------------------------------

  If 64 bits and you need codec.

  Read this 1st and go that route, or use the one below. (Vista or Windows 7)

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 10.0.0 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack (64-bit) 10.0.0 (or newer)
  http://www.codecguide.com/

  K - Lite now includes BOTH 32 and 64 bits in a single download installable.

  Also look for updates, September 6, 2013, was K-Lite Codec Pack 10.0.3
  Download and install it after the main program.

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, modify or value 64-bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default (or WMP12 - Windows7)
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  -------------------------------------------------------------

  And you can use it when necessary because no codex is usually required.

  VideoLAN - VLC media player
  http://www.videolan.org/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Qosmio G50 - cannot install the FM Tuner in Windows Vista Media Center?

  Can someone help me get the most out of Windows Vista media center with my new Qosmio G50.

  There is a tuner inside this laptop and I have the antenna and its plugged in. The drivers all seem to be installed but WMC tells me that I don't have the hardware to run FM stations and I can't make it work. Also, I can't record library but although I can't watch TV no problem at all.

  Someone out there have the answer?

  Hello

  Are you sure that your equipped G50 FM tuner to 100%?

  As I know a few models of G50 has been equipped with a tuner TV with antenna TV port that allows to connect a coaxial cable to this port to watch a TV program and then save.
  But as I said earlier, this feature is not included with all models of G50.

  Sorry, but I didn't find any info regarding the FM tuner.

• Why Windows Vista Media Center Program Guide stopped working

  I've been using Windows Vista Media Center as my main way to watch and record the TV, music, and Photos for a few years (shortly after Windows Vista came out).

  Since January 1, 2013, the program guide showed no data.

  I believe that this is because the Microsoft agreement with the broadcasting of the Data Services to the United Kingdom is exhausted.

  What is Microsoft doing about this?

  Can what steps I take to restore my Media Center if you work?

  Hello Nikki Locke,

  That's great, that you have found a solution. However, you can view the following information.
  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• Windows vista Media Center will not download the new configuration sealing more up-to-date for my region?

  Windows vista Media Center will not download the latest options for my region.  It is under the TV signal, TV download

  configuration options.  When I finally get through all the steps I get only 1 station with a signal strong enough.  I was able to get much more than that in the past.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

   

  Check if that helps.

• Windows vista media center does not I can uninstall and reinstall?

  Windows vista Media Center has been installed, but will not respond. How can I fix this problem?

  Hello

  You cannot uninstall or reinstall

  Try this:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228#appliesTo

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• Windows Vista Media Center crashes when I change the channel

  Original title: Windows Vista Media Center

  Since the beginning of June whenever I try to change the channel on the TV tuner in Media Center it crashes. I tried to do a system restore but restore never worked on my count. Problem event name: APPCRASH. Application name: EHShell.exe I'm looking for suggestions that might solve this problem.

  1] updated TV Tuner card driver. Visit the manufacturer's Web site and download and install the latest driver.

  [2] delete the file mediaCenterDataStore.db. By default, this file is located in the following location:
  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB
  
  Delete: -.

  Start > run > type in %SYSTEMDRIVE%\ProgramData\Microsoft\eHome\mediaCenterDataStore.db > OK.

  Locate mediaCenterDataStore.db and right-click on it, select Delete.

  Restart the Media Center.

  S.Sengupta Media Center MVP

• I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?

  I have Windows 7 Media Player and that you want to know why, after burning an album of my playlist it records, but there is no sound in playback of the CD, that I taped?

  HI - what device you are playing it back on?