Windows Vista SP2 copy files SATA to SATA internal, not on a network.

Similar Questions

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• I have windows Vista Sp2. Cannot get into the BIOS. Computer does not start on the desktop. What can I do?

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Have Windows Vista SP2.  Switch on computer will go not on the desktop.  Tried to get into the BIOS, but get a blank screen.

  Someone at - it ideas. Thank you.

  Don't ned to start the Office before accessing the BIOS...

  The following tutorial is about changing the bios boot sequence.
  #1 step is how to get to the BIOS window. THIS show be what you need. You can skip the rest if they do not apply to you.
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner?

  Is there any place in the windows vista where the files to write on the cd/dvd via a copied cd/dvd temporaily burner? who can be recovered later in the case of the unsuccessful cd/dvd writing?

  Hi Usmansami rana,

  Integrated into the files of caching of Windows Vista to temporary folder when you start burning discs in Windows Explorer or by using a burning program. However, the temp folder is get deleted as soon as the burn completes successfully or not and you will not be able to recover the files.

  Hope this information is useful.

• Works with Windows Vista SP2, constant freezing, jumped through all the hoops and now it seems to be corrupted files after that I ran the sfc.scannow.

  Computer stops responding especially if I have more than 1 page open. Cursor problems, Outlook 2007 running super slow and not very responsive, ran the repair for this tool. Ran Ccleaner, checking virus, Malware, Spybot, clean disk, defragmentation, do a startup repair, chkdsk, and then the tool of sfc.  32-bit Windows system, Dell Inspiron running Windows Vista SP2 with an AMD Athlon X 2 processor.

  2009-12-27 17:39:41, Info CSI 000000 d 1 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:40, Info CSI 000000 d 3 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  ' 2009-12-27 17:40, CSI Info 000000 d 4 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:40, Info CSI 000000 d 7 [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted
  2009-12-27 17:56:34, Info CSI 00000196 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000198 [SR] cannot repair the military record [l:22 {11}] "c:\windows\system32\dllcache\icardie.dll" Microsoft-Windows-IE-Infocard, Version = 8.0.6001.18702, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2009-12-27 17:56:34, Info CSI 00000199 [SR] this element is referenced by [l:216{108}]"Microsoft-Windows-InternetExplorer-8-RTM-Update~31bf3856ad364e35~x86~~8.0.6001.18702.Internet-Explorer-8-x86. '
  2009-12-27 17:56:34, CSI Info 0000019 c [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"icardie.dll '; source file in the store is also corrupted

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ------------------------------------------------------------

  Part of the problem is probably SpyBot which can greatly affect the peformance IE and Vista/Windows 7.

  Start - type in the search box-> find Services at top - click right on - RUN AS ADMIN

  Double-click Service SBSD and change it to MANUAL and STOP

  Then run SpyBot and in settings uncheck TeaTimer - close and restart.

  Now you can run SpyBot as a scanner at the request.

  ------------------------------------------------------------

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  =================================

  If you still have performance problems:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Installation Windows Vista SP2 fails with 737D error code

  When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code.  This error code says "Windows cannot update services and important files while the system uses them.  Save any open files, and then restart the computer. »

  Has anyone encountered this problem and found a solution?

  Thank you

  Joe Kunkel
  

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Windows Vista sp2 and Installer cannot install updates error 80070641 code

  original title; Windows Vista sp2 installer problem

  Hello.  I'm running vista 64 bit sp2 and I seem to have a registry error with windows install.  Whenever I try to install/uninstall a program, I get the error message

  "The application failed to start because msi.dll not found. Reinstalling the application may fix this problem. »
  Maybe related, but when I try to run any windows program (examples are programs office, expressions) I get the error message
  "the specified module is not found.
  Also, I can't do windows updates.  For the latter, I get:
  error code 80070641
  Any help is greatly appreciated.  Unfortunately I do not have the original installation disks for vista, or all the backup files.

  Hi Maxjh25,

  It seems to be that some of the files windows install is corrupt.

  I have some steps that may help you:

  Method 1: Make sure that the Windows Installer service is running.

  a. click Startand type services.msc , and then press enter.

  (b) in the services window, locate Windows Installer service in the services list.

  c. check that the status is started. If the condition column is empty, right-click Windows Installer, and then select start.

  d. If you get error trying to force start the Windows Installer service, try to change the Startup Type to Automatic (default is Manual), then

  e. restart the computer.

  f. If all goes although you should, after the analysis, see the following message "theWindows resource protection did not find any breach of integrity".

  g. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

   

  Method 2:

  a. try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  b. restart the computer.

  c. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  d. try to install the program.

  Hope the helps of information. Please post back and we do know.

• My windows Vista, SP2 doesn't have windows fax and scan lilsted.

  Original title: windows fax and scan.

  My windows Vista, SP2 doesn't have windows fax and scan lilsted. I followed the suggestions of look in System 32. The required file IS NOT THERE! How dan I installed?  I need this program is not compatible Vista my my printer HP Compaq, so I can't use it to scan documents.   The named file was something with FS.exe (don't remember it all now, but he was not there.)  I see that others have found the same problem, with it is not there.

  Please notify.

  E-mail address is removed from the privacy *.

  I read somewhere since the announcement that this feature is not same inclued with Vista Home premium.

  That's OK, Windows Fax and Scan is included in the company and full editions: http://windows.microsoft.com/en-US/windows-vista/products/compare

  You will need to seek an alternative program to use.

• How can I fix search for windows vista sp2

  original title: repair of search for windows vista sp2

  I don't have a problem with my Microsoft updates, but stopped my search on the functions of my office functions. I have Window Vista Home Premium 32-bit with Service Pack 2 installed. How can I fix my computer search functions?

  Hello

  If this happened recently possibly a system restore will help:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ------------------------------------------------------------------------

  Windows Search does not work or research are slower
  http://support.Microsoft.com/GP/windows_search

  Troubleshooting Windows Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  Reconstruction of the Index in Windows Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/rebuilding-the-search-index-in-Windows-Vista/
  How to enable or disable the search Index in Vista
  http://www.Vistax64.com/tutorials/69564-index-enable-disable.html
  Improve Windows searches using the index: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  ================================

  Tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  How to use advanced search in Vista Options
  http://www.Vistax64.com/tutorials/75451-advanced-search.html

  How to restore the page button on the Start Menu after installing Vista SP1
  http://www.Vistax64.com/tutorials/145787-Search-start-menu-button-restore-after-SP1.html

  How to restore the context Menu item search after installing Vista SP1
  http://www.Vistax64.com/tutorials/134065-search-context-menu-item-restore-after-Vista-SP1.html

  How to create a shortcut on the desktop search in Vista
  http://www.Vistax64.com/tutorials/126499-search-desktop-shortcut.html

  ----------------------------------------------------------

  Win Key F opens advanced search

  Searching in Windows Vista, part 1
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Part 2
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Part 3
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

• Windows Vista SP2 install error code 80070002

  I even tried to delete the temporarory he began to download the files obtained at 30% and everything stopped. and now, you can download sp2. What should do?

  Hello

  read this

  It is about this advice from microsoft

  Windows Update Error 80070002

  If you receive the error Windows Update 80070002 of updates, you must remove the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service and then try to check for Windows updates again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  If that does not solve there is a special forum for PC problems

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• Computer will not start after the installation of Windows Vista SP2

  
  After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer.  Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair.  Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair.  No chance that the machine always fails to start and always displays the window "Statup repair."  Auto repair is always unsuccessful.  Repair suggestions will be appreciated.  Thank you.  Bob G.

  Support Microsoft still offers a FREE support for Vista SP2.  Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Impossible to install Flash or Acrobat Reader, nothing happens, no errors on windows vista sp2

  I have two Dell laptops, one was my mother and the other is mine (Inspiron 15xx and 1750).  I deleted down two laptops using the restore factory images stored on computers.  I want that they fully working before I sell them or given the to a friend or relative.

  When I try to install Flash or Acrobat Reader, I first download and then run the installation program and then nothing happens, no screen of welcome, no please, wait or loading... dialog box, no error message, just absolutely nothing.

  I am a programmer with a degree in computer programming and I built my own computer, reinstalled, installed drivers, software and firmware, so I thought I should be able to solve this problem, but as the still I had no luck so far.

  I have:

  (1) installed all Windows updates

  (2) installed Windows Vista SP2

  (3) installed the updates of BIOS, drivers, software and firmware from Dell.

  (4) installed the last IE v7 to v9 present. (This fixes my problem to Skype "Sorry, we couldn't connect to Skype")

  (5) installed the latest Microsoft Visual C++ 2012 Redistribution.

  (6) searched on the internet for the solution and followed a few steps that I thought looked promising but no solution so far.

  (7) I checked the logs install but they are empty either, I can't find the directory, or there is no log file here.

  For me the main problem is that I don't get any information, i.e. None of the error messages or logs, which makes it very difficult to seek solutions that are specific to my problems.  Anyone who can help me to identify the problem, it is find a mistake or a newspaper that shows where the problem is, would help me tremendously and close me solve the problem.

  I think I need to install some type of update will miraculously fix the problem, as point 4 above, where IE upgrade to v 9 fixed my problem of Skype, but I have no idea what it would be.

  Thank you in advance for all help me and I hope that this forum will help others.

  Thanks Abzyx.

  I use Firefox all the time and I would have downloaded Flash while in Firefox, but the download never worked.  The only solution that worked for me was what I mentioned in the post above (message number 7).

  Yes your right, I did not mention on the PDF reader, thanks for pointing that out.

  I noticed that you mentioned using another like Sumatra PDF reader, so I had to look that.

  I found that Nitro and Sumatra where 2 alternatives to Adobe Acrobat Reader.  Nitro looked like a more advanced system, but it does not work.  Sumatra seems simpler, but as PDF readers go, if I can read a PDF file, which is fine for me, Sumatra has worked well.

  Research on the internet I found a video that has been really good for my problem.  I'm looking for 'acrobat reader vista' and the 4 down link was a youtube video called "Install Adobe Reader in Windows Vista" on the page: https://www.youtube.com/watch?v=1wAki19nDSY

  After you follow the instructions in the video, I am Acrobat works.

  Basically, I went to the URL of the video: ftp://ftp.adobe.com/pub/adobe/reader/win/

  Then try to find the most recent version, so I tried 11.0.16, but this does not work, the video shows using 10.0.0, so I thought I would try to use 11.0.0 and if this does not work, try the version 10.0.0.  I found version 11.0.0 worked for me then once installed, I checked for update in Acrobat Reader and now I 11.0.8 and this seems to be the best version of work for my computer.

  Thank you again Abzyx and everyone who help me by posting your comments.  By studying what has been mentioned, internet search and try different installers and more clear, I found what I was looking for.

• Skype 7.8.73.102 bug on Windows Vista SP2

  Hello world

  My OS is Windows Vista SP2.

  Each Windows Vista SP2 updates had been installed.

  I met again the same bug in Skype.

  I used to install Skype offline, and then start the first time Skype has failed

  as the attached picture.

  After you restart, Skype still doesn't work even if online.

  How could I solve the problem?

  Thank you very much.

  Best regards

  Steven.

  

  I updated to Skype to 7.10.73.101, and then, the question did not appear.

• Windows Vista SP2, is error (0 x 80070490)

  I bought this computer in 12/2007 and Windows Vista SP1 is already installed when I bought, but now the updates for Windows Vista SP2 and when I click on install request I accept the terms, but then I get a this: ERROR NO FOUND (0 x 80070490) and I got to help, but this error does not appear on the errors. What can I please I need help ASAP!

  friend of Bill w.,
  Go through this article , because it gives the steps to solve the problem you are experiencing.  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.