Windows Vista, the installation of aol. at the conclusion the best connection, I'm going to a blue screen, uninstall aol windows is fine

Similar Questions

• The app is the best connect my Ipad pro to a pc screen?

  Anyone know what app or software is better connect my I Pad Pro to mirror on a second PC screen? I've tried Astropad but I don't know if there is a version for pc?

  Thanks, I'm new with apple.

  Emanuele

  You can use reflectors to reflect your ipad to your pc screen. Note: You won't be able to interact with what is on you, the Pro of the PC.  You must control the pro pro.  Apple does not allow the remote access connection for the ipad.  If you want the ipad to appear on two pc screens, you mirror the pc to another pc screen.

  http://www.airsquirrels.com/reflector/

  ----------------------------

  To connect to a pc, you can use:

  Post multifaceted read. You can use a mouse with Windows Remote Desktop vnc on the ipad applications.  You need the right app store app.

  Read his article here:

  It is on page 2 of this discussion to half way down.

  https://discussions.Apple.com/thread/7319286?start=24 & tstart = 0

  The mouse of citrix.

  https://www.Citrix.com/products/mouse/overview.html

  http://store.Citrix.com/store/Citrix/en_US/PD/ProductID.317779200/ThemeID.377130 00

  iOS app:

  https://iTunes.Apple.com/us/app/Citrix-receiver/id363501921?Mt=8

  Citrix server application:

  Demo of Swiftpoint GT travel mouse with remote Windows session. Stop and start the knowledge.

  https://Vimeo.com/113962546

  "To connect to any computer in the world that jump Desktop is a reliable and secure (RDP and VNC) remote desktop app for iOS, Android, Mac and PC that allows you to connect to any computer, anywhere in the world." Support for Swiftpoint mouse.

  https://jumpdesktop.com/

• Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Using Photoshop, I have come across a problem, when I launch Photoshop CC (2015), it instantly goes to a blue screen with the error of KERNEL_SECURITY_CHECK_FAILURE, my PC is Windows 10 (64-bit), so please it outside. Thank you

  Hi Sammo,

  See this thread: Re: photoshop, 'kernel security check failed'

  Kind regards

  Claes

• Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb?

  Whenever I try to evaluate and improve the performance of the computer, I get a type of white blue screen telling me I have bad software or hardware and my computer does climb? He did NOT finish the task is content to any screen blue screen saying it's bad it's bad, your computer is messed up bigtime, so-to-speak

  Hi Cynthia,.

  1 have you ever done any hardware or software changes to the PC?

  2. What is the brand and model of the PC?

  3. What is the full error you get when you try to evaluate the computer?

  Audit of the statues of the device in the Device Manager.
  a. click the Start button, type devmgmt.msc and press ENTER.
  b. check for any exclaimation mark and the status of the devices.

  Follow these methods.

  I suggest you to first run the resolution of performance problems.

  Method 1: Open the resolution of Performance problems
  http://Windows.Microsoft.com/en-in/Windows7/open-the-performance-Troubleshooter

  Method 2: Disconnect non-essential external devices and try to evaluate the computer.

  Method 3:  Also, temporarily disable the antivirus and check the question.  Anti-virus programs are sometimes called causes this problem.

  Turn off the Antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you.

• whenever I try to install the new software on my computer goes to a blue screen and stop making

  Original title: HELP!

  whenever I try to install the new software on my computer goes to a blue screen and stop making

  Hello

  It takes a lot more information

  What operating system

  etc.

  read this

  How to ask a question

  http://support.Microsoft.com/kb/555375

  -What you trying to do?
  -Why are you trying to do?
  -Do you try already, why and what was the outcome of your actions?
  -What was the exact error message you received?
  -How long have you been experiencing this problem?
  -Have you searched the relevant forum/newsgroup archives?
  -Have you tried all the tools or KB articles or other resources?
  -Have you recently installed or uninstalled any hardware or software?
  -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

• Vista stops himself and goes to a blue screen with the error code debug_usb_code.

  Vista stops himself, and a blue screen appears with a debug_usb_code.  I have problems with windows shut.  Tried a restore point.  Finished in the configuration of the system and found that the windows Defender has been the origin of the problem at startup.  I disabled it, and the computer is now in operation.  However, it is slow, sometimes crashes after about an hour, it will be stopped by itself and give the code mentioned above on a blue screen error.  Then it will restart by itself.  Please help!

  Run systempropertiesadvanced.exe and in the startup and recovery section, click settings.  Then uncheck 'automatically restart '.

• I have the error 0x0000008e (0xc0000005 0x833de487 0xb8bff73c 0x00000000) with blue screen

  Please help me with this...

  Hello

  What version of Windows?

  Please ask to the repair of the appropriate system of responses - Windows (corresponding to your version)-
  and recovery Forum.
  
  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =================================================================

  Methods of troubleshooting for help - these can be used for XP, Vista or Windows 7.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or
  so time of the BSOD for more information on the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 which shows the
  Details of all application crashes occurred in your system. The information of the plant are extracted
  the .wer files created by the Windows Error Reporting (WER) of exploitation component
  system each time that an accident has occurred. AppCrashView also allows you to easily record the
  list of accidents to the text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• have files on a drive that have been defined as private and the need to open. Disc got a blue screen

  On my laptop, I had a logon administrator who has been in private. The computer has a blue screen. I ran the XP CD repair disk and that took care of the blue screen, but it would not go as far as allowing me to re-authenicate the license on XP. It froze just straight up. I took chase him and attempted to transfer the files to another drive, and authorities wouldn't allow it. Need either re authenticate the reader to allow access, or find a way to UN-encrypt files and transfer them.

  Hello

  • What is the error you receive on the license?
  • You are able to start Windows after the installation of repair?

  If you are able to start, you can check out these methods:

  a.Open workstation
   
  b. double-click the drive where Windows is installed (usually drive (C :), unless you have more than one drive on your computer).)

  If the contents of the drive is hidden, under system management, click Show the contents of this drive.
   
  c. double-click the Documents and Settings folder.
   
  d. double-click your user folder.
   
  e.Right - click on any folder of your user profile, and then click Properties.
   
  f.On sharing tab, deselect make this folder private so that only I have access to it check box.

• the pc switches work and I get a blue screen when the driver is installed

  INSTALLATION DRIVER CAUSES BLUE SCREEN AND SWITCHING TO AND SUITE

  I have re-installed windows xp pro several times and everythong is going fine until I install the drivers from the disk. pc switches work and I get a blue screen with a RECOVERED FROM A GRAVE... message. I also have a xp(not professional) of windows disk, it works with the drivers, but the pc doesn't seem to work as well. I want to run xp pro version, that's why I bought it. Help, please.

  It makes no difference, what version of Windows XP, you install, it will make no difference to his execution, or use. (with the exception of you want to join a domain)

  If your PC boot after installing winxp pro, visit your PC manufacturers site, or the site of the motherboard and to get the latest drivers for Windows XP a go from there

• Windows vista 64 goes to a blue screen after reboot of an installed its own.

  I have a motherboard Digital of EVGA790I and he gave adjustments to windows. The BIOS recognizes the hardware installed, but windows has had many problems with the recognition of the hard drive.  To get an operating system on the system, the only thing that install windows was Vista 32 bit on an Eide drive. He did not find the sata drive and I was able to install vista64 as expected. I tried 3 times to install vista 64 to go to blue screen of death just after the system reboots to finalize. The blue screen said problems with removable hardware.  As I said earlier, finally, I tried the 32 bit version of vista and it went right in. I would really some ideas for installing the 64-bit version. An OS 32 bit and 8 GB of memory is not a very satisfactory combination. I checked with EVGA and I have the latest version of the BIOS.

  Hello

  I thought it could be this old problem when installing 64-bit if you use more than 2GBs of RAM with some motherboards.

  This link seems to confirm this thought with your special mother of the other experience.

  http://www.overclockers.com/forums/showthread.php?t=598520

  See if that solves it.

  And Windows Update wiill not does not download options for 64-bit Vista SP1 or Vista 32 bit (x 86). at the end of Support if you don't have it.

  Here is the link to direct download for Vista 64-bit SP1

  http://www.Microsoft.com/download/en/details.aspx?ID=21299

  See you soon.

• Suddenly my laptop refuses to open the log in page and everything leads to blue screen of death, something to do with the hard drive problems.

  I do not quite understand computers.

  Randomly, I received a notice pop up saying that I need to backup my files because windows detected a hard disk problem.

  I did scans and system restore but nothing works.

  I used to be able to access safe mode, but now I do not get this option.

  I kept getting the blue screen of death to do something.

  But now I have nothing other than the loading page "TOSHIBA Leading Innovation".

  I have a Toshiba laptop, his more than two years and use Windows Vista.

  No miracle solution?

  Or should I bring to wait for him?

  If so where I will get the best service at afforable prices?

  Hi BethanyLa Chappelle,

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  What to do if Windows does not start correctly

  What are the system recovery options in Windows Vista?

• Impossible to install the graphics driver for Probook s 4530 without blue screen or the repair mode

  Recently due to the failure of the hard drive, I replace my drive with an SSD Intel 520 180 GB. I tried to install from a DVD MSDN windows 7 Enterprise 64-bit. Everything was going fine until I had to install the drivers. All of them have been installed OK, but not for the graphics. A useful user Paul_Tikkanen guided my via different drivers and tricks, but with the same sad result. Not his fault, of course. On recommendationen of Paul, I ordered support restore disks for HP businesses. I got them today and of course happy as a kid receives his candy Saturday I put disks in the dvd player for the installation. Same thing happened again. Graphics driver has not worked here either. He me gives either a blue screen on reboot or I am se repair to restart mode.

  I tried to find auto driver from Intel, but IE crashes when you try. I also tried the generic Intel driver. If someone has an idea or can extract drivers work this would be much appreciated.  The generic Microsoft driver works well but I get a maximum of 1024 * 768 resolution.

  I also read that you need to install the chipset driver and intel

  You can see my entries a little frustrated in the following thread: http://h30434.www3.hp.com/t5/Notebook-Display-and-Video-e-g-Windows-8/4530S-graphics-driver-and-fing...

  The thread above also contain useful material IDS etc.

  I have also contacted the provider here in Sweden, to check if the warranty has expired yet. The laptop is 1.5 years old.

  This problem has been resolved by manually installing the HP Intel HD graphics driver.

• How to get the best connectivity WLan on Satellite U200

  I wonder if everyone is disappointed by the scope of the U200 wireless.

  I always find that my laptop shows 2 bars for their my BT hub (on the floor) when my eeepc located beside the laptop displays 5.

  I also found in other places that my partners laptop detects wireless networks much more that I do.

  I would prefer to explore the possibility of increasing my wireless connection before moving my BT hub to give me a better reception. being able to find the hub with my laptop wherever I am at home (like my partners)

  Anyone got any ideas please?

  OK, a few points of view but no ideas... I've now experimented with an external wireless adapter

  I have a toshiba satellite pro u200 with built in WiFi. I have also 2 adsl providers in the House (one is cancelled as soon as I am happy with the new - but I'll take the opportunity to experiment at the mo to try to resolve some problems)

  I have a wireless router in my office (the service of Virgin Media 2 MB - VM), the other is upstairs (BTHomehub 8 mb - BT)

  Using the built-in tosh Wireless adapt if I'm sitting 2 laptops side by side on my desk both pick up VM 100%. (tosh and eeepc)-c' is the case that the router slot in the Office!

  If I'm sitting the same 2 latops on my desk and get them to connect to BT, the onlys tosh gives 2 bars, the eeepc 100%. (by bars, I mean view available networks - see 5 bars to show the strength of connection)

  If I then plug an external 108Mbps Netgear WG111T Wireless USB 2.0 for the tosh connection adapter improves to 4 bars.

  can I do the built in WiFi on the tosh to improve things or am I better to use an external adapter. If I use the outside how tosh knows which adapter to use? as I have the switch wireless to the position we don't if this activate the integrated?

  Allow the pc show the network show the icon when connected and can see the speed to 54Mbps - whatever that means?

  shouldn't I expect to see 108 Mbit/s if that's what the external netgear is capable of?

• My latitude D610 crashes on me. From the start, I get this message on a blue screen: a malfunction of equipment

  Message hole bed hardware malfunction call your hardware support vendor.

  NMI: Parity check/Memory Parity Error

  The system is shut down

  Now it's on a blue screen and then I have to hold the power button until the computer turns off. Nothing was wrong with her until my Bilkin wirless card broke and I had to reinstall the Witch of a down preveusly internal wireless card so I shot, but it worked very well until I had to stop so we could go out and then when I turned on the computer laptop back it keeps in past. now is this a problem with the wireless card or my memmory?

  With it this way I can get on only in plain old safe mode not safe mode with networking. Maybe that I need to take the card out and try it and if it works I think I'm stuck hang the old wiring cat 5 and goining this way right or wrong? What is a body to do? I have not I hope so gruff like to be wireless, I mean after all that's why I pay big bucks so I can go wireless.

  Thanks in addvance here you guys for the excellent work to help us poor people in this way.

  jimmy1950hailey

  Jimmy

  If I understand your question, yes get out the wireless card and try. If that too fails, contact Dell or your local computer repairer.

• my home network that gets the best connection

  I have my router connected to my pc and one switch (another router) connected to the computer of the children upstairs and other connected via wyfi who gets the best signal?

  Because in most cases, the Internet itself is significantly slower than any local LAN connection, there will be little difference that the bottleneck is the internet.

  About the only exception is a very common wireless network. Because all of the wireless clients are connecting to the same base station all have to share this speed of connections. So the performance of the base station must be divided between the number of clients. As mentioned WiFi speed tends to be higher that is practically possible and any additional loss occurs between customers, this can have an effect.