Windows will run after the installation drive encryption?

Similar Questions

• I use Windows 7 and after the installation of the browser Firefox, error run as admin

  I have my using window 7 and install firefox browser but error run as admisreator...

  Hello

  1. do you get error message during the installation of Firefox?

  2 are you having the same problem with another facility as well?

  3. have you made changes on the computer before this problem?

  If you experience the problem with the installation of Firefox, you can try these methods and check the status of the issue.

  Method 1:

  I suggest to keep the computer in a clean boot and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

  Method 3:

  Disable user account control and check the status of the issue.

  Turn user account control on or off.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

• Old HP1510 works in Windows 8 & IE10 after the downloaded driver, but running out of PC printing options.

  Always have the CD disc that came with my HP1510 to download the printer driver.  However, my printer is so old that the driver on the disk is no longer compatible and not recognized by Windows 8 on my new laptop computer.

  For this reason, I was forced to download a printer driver on the HP site.

  It appeared to work after connecting my printer on my laptop, and the wizard cable, the driver for the downloaded HP1500 series and seemed to be successfully installed.

  However, I then found my extremely limited my laptop printing options.  I was able to print on a single page, or all, and that's about all.  Looking under the option 'more', my limited options were virtually repeated on a different display.

  But, it was when he came to try to print a program for a friend, that I am extremely frustrated, as on the screen, I could display 2 pages together, but could not - try as I might - print anything other than a tiny page of a sheet of paper, which could have use for a complete printing 8 sheets at this rate.  I was forced to pay to go on another computer in an Internet Café where I could print the pages of a copy of the file on the memory stick in "book view" & fit 4 tiny pages on a single sheet!, which is what I want to achieve from my laptop but can not.

  It is an old printer and before Windows 8 even thought, all features are simply not there. The main goal is just to make the same printer compatible with Windows 8, providing the basic features. The best you can expect is updated later, but there is no guarantee that you will never see these options in Windows 8.

• What happens if I forget to remove my key (Flash DRIVE) storage media after the Bitlocker Drive encryption key is responsible?

  I'm new to BitLocker and don't know much about computers in general. I do not have a TPM, so I use a USB key containing the BitLocker encryption key to start Windows. Everything works fine. I don't, however, forgot to remove the USB after that and also when you restart the computer. This could be a security problem if I am connected to the Internet? (I'm alone and therefore am not worried else wanting to access the computer in person.) I'd appreciate any help I could get with this question.

  Hi Tombroilt,

  If you are only using the computer, then it is not a security problem. If you connect to the computer. I suggest you to see the following links for more information.

  Windows 7 BitLocker Executive Overview
  http://TechNet.Microsoft.com/en-us/library/dd548341 (v = WS.10) .aspx

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (v = WS.10) .aspx

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Windows.Old folder after the installation of Windows 8 Pro?

  Can I remove the windows.old folder after Windows 8 Windows 7 installation? I deleted this folder when I installed Windows 7 from Vista.

  I used the facility for a few weeks now, and everything works fine. I wanted to just make sure I can delete these files. Can I save the folder to an external drive for guard duty; I just to free up hard drive space.

  Thanks for your help... Phil Springer

  Hi Phil

  Here are the steps to delete the Windows.old folder.

  Go to the desktop, press Windows key + R.

  In the Run dialog box, type cleanmgr.exe, and click OK.

  1. If you are prompted to choose a drive, click the drive that you have Windows installed on and then click OK.

  2. in the dialog box disk cleanup, on the Disk Cleanup tab, click on clean up system files.

  If you are again prompted to choose a drive, click the drive that you have just installed Windows on and then click OK.

  3. Select the Previous Windows installations check box and any other check boxes for files that you want to remove, and then click OK.

  4. click on delete files.

  Concerning

• Restore windows 7 using the windows.old folder after the installation of windows 8?

  Hi all

  After you have installed windows 8 on a pc comes with windows 7, I learned just learned that I don't have a product key valid win8 because I already used once for an installation of win8 on another pc. Now, I need to go back to win7 because I don't plan on buying another product key.
  I know that I can do this with the option to restore from the manufacturer, but it will be a hassle to get back to the top/reinstall all my applications and data.
  Is it possible to go on win7 by using the windows.old folder?

  Hello

  Whether you are planning to install Windows 7 on the computer that has Windows 8, we can only perform a custom installation.

  If you are using an OEM computer, see the link:

  Understanding downgrade rights

  If you do not use an OEM computer, you may need to try the following steps to perform a custom installation when you have lost the applications and settings, however the data stored on the C drive will be saved to the Windows.old folder.

  For the steps to detalied on how to spend to try solutions by André from the link:

  Can I downgrade to Windows 7?

  Note: Make sure that you back up important data before performing a custom installation.

  Come back if you have any questions with windows and we will be happy to help.

• Where the SQL Scripts running after the installation of the ODAC for Oracle Client?

  I just installed ODAC for Oracle Client on a windows server that runs a database of sql server, allowing developers to connect to a web application to an Oracle/Unix database. The installation States to run SQL scripts, located in the $ORACLE_HOME\ASP.NET\SQL directory after installation. I don't know where to run them? On the ORACLE DB on the Unix server? If someone could let me know, I'd appreciate it. Thank you.

  You must run on the Oracle database server, but they are necessary only if you use Oracle for ASP.NET providers.

  If you just install the software, so you can use OLEDB with SQL Server linked server, for example, you don't need them. What do you need to run although if this is the case is the oramtsadmin.sql script that creates the objects used by the Oracle MTS Recovery Service (if you do not have these objects created on the database) that SQL Server uses a distributed transaction for Oracle connections I think.

  It will be useful,
  Greg

• Unable to see the number of files on the hard disk on Windows 7 computer after the hard drive crashed windows xp system

  Original title: unable to see many folders on separate conputer

  I was using windows xp with service pack 3 and windows 7 on a separate booklets. Suddenly the laptop with XP crashed... The hard drive was Ok - cased with a USB port, but now on the connection with the computer laptop windows7 I saw no many records there - pls help

  the system crashed in fact as I was reading the (visualization of the pictures - JPEG, bmp and also some books .pdf) & suddenly.  In the Xp laptop NVIDIA graphics card was there.  He lacked RECENT documents, I see

  Hello

  Try the methods provided below and check if the problem persists.

  Method 1:

  You can make the disk check to make sure that the hard disk is not damaged.

  See the link below for more information on disk error checking in Windows XP.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Method 2:

  This issue could also be linked to the virus/malware on the hard drive that may have caused the crash of the system.

  Click on the link below to download and run a full scan of the system using the Microsoft Safety Scanner.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• The upgrade from Windows XP to Windows 7 Pro after the hard drive took a dive.

  Hello, I have an old Dell Inspiron E1505, I bought in 2006, which I have upgraded from Windows XP to Windows 7 Pro last an online purchase that came with a product key of designertechsoftware.com in April of 2014. Months later, the hard drive has so I replace w / a 60 GB one and replaced the RAM w / 2-1 GB cards. I don't have a disc of Windows 7 Pro but I got it work using the old XP dics, originally, it came with. Can I use this disc to enter the product key code that I got online for Windows 7? I see there is an upgrade option that comes up when I run the XP disk once it's been installed on my laptop. Thanks in advance for your help in my question. Not sure if it has been already answered the previous question.

  Your best option is to ask a backup copy or to borrow the corresponding edition, you have a license from a friend. Ensure that it is a upgrade disk or any retail version is authentic.

  How to replace hardware or lost, broken, or missing Microsoft software

  http://support.Microsoft.com/kb/326246/en-GB

• Partition Windows 10 disappeared after the installation of El Capitan

  @Loner T - seems you have helped others on this question and hope you can help me through it too.  I have a MBP early in 2013 with a 500 GB SSD.  I allowed the upgrade to El Capitan, and like others, this is the boot camp partition disappear.   Holding the option key pressed when starting displays only the ability to boot into OS X.  Here's what I've done so far:

  -SIP is disabled.  Confirmed after restarting normally by typing csrutil status

  -Tried to do the other bootable partition using your instructions on

  -fdisk/dev/disk0-e

  -Pei

  -setpid 4

  -07

  -Pavilion 4

  -Pei

  -w

  -y

  After resigning, I restarted and press option.  Windows now appears when I press and hold option, but when selecting it I get the error "Missing Operating System".

  Here is the result of all other orders:

  diskutil list gives:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 300.0 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database 101,0 GB disk0s4

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 299,6 disk1

  Logical volume on disk0s2

  DAED883D-1E3E-48A7-A986-A2C2E5483BE7

  Unencrypted

  CS-diskutil list displays

  

  TPG - vv - r see the/dev/disk0 poster:

  

  sudo fdisk/dev/disk0 gives:

  
  

  
  

  I think all this means I have a lost partition as you described to others.  I downloaded Testdisk and gdisk.  Output of TestDisk:

  

  Run a quick scan on drive Test and see these unrecoverable partitions (stupid question this mean that they are lost for good or they are good and that they need not be recovered?) 。

  

  Prosecutor:

  

  Product selection P here:

  

  These are the values that I can use in steps 7 and 8 in this post?

  
  

  Step 7-587618304

  Step 8- + 388564992

  In the first series of markets Gdisk. The second set of rebuild MBR is the same for a standard installation of BC.

• Cannot run after the installation of the ebs sqlplus

  Hi gurus,
  I managed to install thank you ebs 11.5.10.2 (under aix 5.3) for the help you gave me.
  However,.
  I am unable to run "sqlplus/nolog '. I got the following error when you run sqlplus:
  
  Oracle > sqlplus/nolog
  Error Initializing SQL 6 * more
  SP1 file < lang > .msb not found message
  SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory
  
  my installation is /dvp2/oradata/visdb/9.2.0 so I added this profile entry.
  
  ORACLE_HOME=/dvp2/oradata/visdb/9.2.0
  Export ORACLE_HOME
  
  but still get the same error message.
  pls help me.
  Thank you

  Hello

  I am unable to run "sqlplus/nolog '. I got the following error when you run sqlplus:

  Oracle > sqlplus/nolog
  Error Initializing SQL 6 * more
  Sp1.msb file not found message
  SP2-0750: you may need to set ORACLE_HOME in your Oracle software directory

  my installation is /dvp2/oradata/visdb/9.2.0 so I added this profile entry.

  ORACLE_HOME=/dvp2/oradata/visdb/9.2.0
  Export ORACLE_HOME

  Do not manually set the ORACLE_HOME, source file database env as user oracle under directory /dvp2/oradata/visdb/9.2.0 instead (i.e. execute file-_ .env .env) then you should be able to run sqlplus. To make sure you have from the file env correctly, issue of "echo $ORACLE_HOME".

  Thank you
  Hussein

• Why my update installation will not after the installation of 5%?

  I was told last night that my Photoshop software was either damaged or missing - I went to the cloud icon in my toolbar and he told me that I needed to upgrade to version 2015. Once I started, it showed the progress bar, noting how the update was completed, which never went beyond 5%.

  I let it run all night and this morning it is still 5%.

  I have looked for help on the Adobe site, but it's really hard to find.

  Not sure what I should do? I need to use Photoshop as soon as POSSIBLE but can't - HELP!

  Hello

  Please see connection to CC - stuck on "installing update...". »

  Kind regards

  Sheena

• Error 404 - not found - after the installation of Essbase 11.1.2.2

  Hello
  
  I encountered error.
  
  I have a box of PMC 11.1.2.2 using Windows 2008. After the installation of Foundation and configure it, there is no problem at all. I can open workspace and interop as well.
  However, I added Essbase, installation and configuration of it. But after installing Essbase, I managed to turn it back on Hyperion Sharing Service, it did not work.
  
  The error that says:
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  
  What I did is also a reconfiguration of shared services, Essbase. But no luck at all.
  Does anyone have any idea, please advise. Thank you.

  Sometimes, this error may be because the data source details are incorrect that I showed you yesterday in WebLogic.
  I don't know how you managed to cause questions to the Foundation after the addition of essbase as I do not have the process that you did.

  If I go to WebLogic and change the user to the EPMSystemRegistry data source and then start the server EMP service the same errors are generated.

  <15-Jun-2012 08:32:58="" o'clock="" bst="">
  ".>

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I'm having a problem reinstalling Windows XP. After formatting the disk and create partitions, it will not complete the installation.

  Problem reinstalling Windows XP

  I'm having a problem reinstalling Windows XP.  After formatting the disk and create partitions, it will not complete the installation.  He goes back and reinstall Windows again.  I go through the installation of 39 minutes, the computer restarts to complete and it loops back and start the installation again. Why it does this and what I can do to move beyond this?

  Go into the BIOS and make sure that you your hard drive is not set to off, and that is the first priority boot CD and your second HD.

  Don't push when it restarts anything just to let him do what he does and report back if anything I'm sorry I have no idea.

• After the installation of the OC windows 7 audio driver cannot be installed

  My computer is Toshiba satellite A40-s270 is designed for Windows XP after the installation of the co win 7 the sound is not coming on the icon of speakes I see X in red. What can I do to get the sound

  [Moved from comments]

  Hi Dr.Kamuzora,

  There is no Windows 7 drivers for your model. You can see the following link for more details:

  http://support.Toshiba.com/support/modelHome?FREETEXT=556028

  Windows 7 drivers are not available, first of all, let's try to uninstall their current card drivers and restart the computer so that Windows will try to install the base for your sound card drivers.

  Refer to the procedure below:
  

  a. press Windows key + R, type devmgmt.msc, press on ENTRY.

  b. in Manager devices, go to the audio, video controller and game, expand it.

  c. right-click on its index map, click on uninstall and click Ok.

  d. restart the computer.

  If the sound does not work, we will try to install the XP drivers (from the link above) in compatibility mode.

  Refer to this link: make sure to run older programs in this version of Windows
  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  If the problem persists, I suggest you contact Toshiba support:

  http://forums.Toshiba.com/T5/computer-troubleshooting/CT-p/cat_troubleshoot

  Hope the above information is helpful.