Cannot run after the installation of the ebs sqlplus

Similar Questions

• Cannot run chkdsk - Chkdsk cannot run because the volume is in use by another process.

  original title: can I run chkdsk on win xp home, but when I try to use switches, I get cannot lock the current drive. Chkdsk cannot run because the volume is in use by another process. HELP PLEASE

  I run chkdsk without switches on win xp home. I told myself I file error and to set running chkdsk with /f. but when I try, I get the cannot lock the drive, chkdsk may not run because ect...  I tried in safe mode, same thing. I sfc/scannow, but it has not fixed the problem files. help please

  It's normal.  You can not run a check disk on your system disk because your system is to use.  The Message you get should ask you if you want to run it at the next reboot.  You must answer 'Yes' to this message, and then restart your computer.  A disk check should take place as it is restarted.

  FYI: A check disk can take hours if you have a large drive or there are a lot of problems on the disc and you cannot use your machine while the scan is in progress.  Better to operate during the night.  Also, I got checkdsk completely erase the hard disk to the point where the only option was to reformat and reinstall Windows.  Make sure that your data available are well-supported before running Chkdsk.

  "How to perform disk error in Windows XP check"
    <>http://support.Microsoft.com/kb/315265 >

  HTH,
  JW

• Chkdsk cannot run because the volume is in use by another process

  My computer was working fine until last night. Now when I connect I get a blue screen saying that the computer shuts down to prevent further damage from happening. I tried to restore to an earlier point in time when my computer was working but then I get the error:

  The OS disk (C :) has errors.
  Windows has detected corruption on OS (C :) file system. You should check the drive for errors before you can restore it.

  So I'm going to run the chkdsk utility, and I get the error:
  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts.

  I'm confused because the chkdsk unility usually works, and I have no idea why she is being used by another process. I am clearly not very good with computers. I tend to do a lot of spywear and adwear on my computer. I have Spyware Doctor that removes any infection.

  Help, please. I've tried everything. Thank you.

  Asha22,
  It appears from your last post why chkdsk did not run on reboot and you gave an incorrect message is that you did not a space between the volume and the f number.  The correct syntax is:

  CHKDSK c: /f

  You can also run the utility disc in this way:
  http://windowshelp.Microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79C7-0f91-9337c2c41f811033.mspx

  1. open the computer by clicking the Start button, click computer.
   
  2. right click on the hard drive you want to check, and then click Properties.
   
  3. click on the Tools tab and then, under check for errors, click check now.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will simply report a problem, but not to fix them.

  To perform a full disk check, select search and attempt to recover bad sectors. This scan is trying to find and repair physical errors on the hard drive itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
   
  4. click on start.
   
  Depending on the size of your hard disk, this may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.

  Note: If you select automatically errors in file system of fix for a disc that is used (for example, the partition that contains Windows), you will need to reschedule the disk check for the next time you restart your computer.

  The reason that it says that the disk is in use by another process is because it is in use by the operating system (Vista), and that's why it must be run at startup, before the operating system loads fully.

  Another utility, you need to perform is the System File Checker, if you can get your computer to start, either normally or in Mode without failure.
  To run the System File Checker tool, follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Let us know what these tests are and how we can also provide assistance.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Getting error: cannot run on the development web server configured

  I installed Visual studio 2012 and IIS 7 on Windows 7 Ultimate version. I get the error message 'Cannot run on the development Web server configured' and 'Impossible to run IIS Express' when I tried to run a web application from VS2012. If anyone knows how to fix it please tell me.

  Hello

  It is not a community forum for VS.

  Try the Visual Studio Forums

  Visual Studio development category:
  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• Where the SQL Scripts running after the installation of the ODAC for Oracle Client?

  I just installed ODAC for Oracle Client on a windows server that runs a database of sql server, allowing developers to connect to a web application to an Oracle/Unix database. The installation States to run SQL scripts, located in the $ORACLE_HOME\ASP.NET\SQL directory after installation. I don't know where to run them? On the ORACLE DB on the Unix server? If someone could let me know, I'd appreciate it. Thank you.

  You must run on the Oracle database server, but they are necessary only if you use Oracle for ASP.NET providers.

  If you just install the software, so you can use OLEDB with SQL Server linked server, for example, you don't need them. What do you need to run although if this is the case is the oramtsadmin.sql script that creates the objects used by the Oracle MTS Recovery Service (if you do not have these objects created on the database) that SQL Server uses a distributed transaction for Oracle connections I think.

  It will be useful,
  Greg

• Cannot start after the formatted NTFS partition

  Option to boot OS X suddenly absent after that I formatted the partition NTFS (bootcamp) of Windows installation.

  

  I read many previous question in many Web site and

  I tried to fix it in disk utility, but it cannot go up more.

  user mode single launch I tried, but it does not start.

  already reset NVRAM and SMC.

  Is there not any solution to start again or access my files in the partition mac to back up?

  Thank you.

  Somehow, you managed to format your OS X with making it unusable NTFS volume. I recommend you do the following:

  Clean Install of El Capitan

  Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears.

  The Utility Menu appears in 5 to 20 minutes. Be patient.

  Select disk utility, then click on the continue button.

  When loading disk utility, select the drive (generally, the entry Out-bumpy) in the list aside.

  Click the Partition tab in the main window of disk utility. A panel will fall.

  Set the GUID partition scheme.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then click the fact when it is active.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

  This should install it the version of Mac OS X that has been previously installed when the computer was new.

• Applications cannot run using the latest device software and SDK

  I have an application of stunts that I try to run on the alpha of dev, but I get this error: (which occurs after the splash screen, then first screen appears)

  "Launch BB10BabyNames" has encountered a problem:

  Error in the final launch sequence

  When I click on "details > ', I get:

  Error in the final launch sequence
  Failed to execute the command of MI:
  -break-insert t main f
  The debugger back-end error message:
  Cannot access memory at address 0 x 2310
  Cannot access memory at address 0 x 2310

  ...

  The way I've updated by SDK had to go on the native menu 'Help' and "Update SDK", as described on the web.

  In the top drop down menu, I selected:

  "BlackBerry 10 native SDK 10.0.9.2318"

  And my OS version is:

  10.9.9.339

  I noticed that my:

  Project-> Build Configurations-> value activates

  ... has been configured for the device debugging

  But when I went to Run-> Debug Configurations, I selected "device-Release.

  I put this in the "device-Debug' and now I can start the application.

• Program cannot run because the lack of MSVCR110.dll

  Hello

  I try to install WampServer on my computer and get an error saying:

  "Program cannot start because the MSVCR110.dll file is missing from your computer.

  Every Web site I looked on told me to download the Visual C++ Redistributable for Visual Studio 2012 updated 4 of this link:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30679

  Every time I have download and run the application nothing happens. The application will execute and do the installation and the last screen will say just 'full installation' and the only option is to hit the close button. But when I look at the list of programs in the Control Panel, the file that I had downloaded is NOT of the same type as the Visual C++ Redistributable for Visual Studio from previous years. Also, when I search the file msvcr110.dll from the Start button, two files appear as on my computer (regardless of whether or not I install the 2012 update).

  If anyone can help me understand what the problem is, it would be great!

  Thank you!

  Try to download the file from this link

  http://www.dll-files.com/dllindex/dll-files.shtml?msvcr110

  Try to save the file by copying in this place or check if the file already exists on this site

  c:\Windows\System32

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• Rundll32 to run after the cancellation of IE9 on Windows Vista

  Hi, I am using Vista and after I closed IE9, then two rundll32.exe process running, one with 700-800 k. for this slow down my computer!

  I already clicked on "Delete browsing history by leaving" so please do not suggest that.

  Hello

  Ntdll.dll exported the Native Windows API. The Native API is the interface used by the operating system user mode components that need to run without the help of Win32 or other subsystems of the API.

  Run a complete virus scan.

  Microsoft safety scanner

  http://www.Microsoft.com/security/scanner/en-AU/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. He also does the disk check, and you may lose the amount of data.

• Unit test: is there a way to make the dynamic query of the value of running after the boot process?

  I wonder why the dynamic value query is executed before the boot process? Logically, it makes sense to run after them.

  For example, I test a stored procedure that is supposed to delete a record, and I'd like to create this test report should be deleted as part of the startup process before execution of the stored procedure call to delete this test record. Apparently the dynamic query of value not returns not the test report in as long as the query parameter to call the stored procedure under test, which makes me think that is executed before the startup process of design...

  Please advise...

  Thank you

  Val

  As this thread does no traction/attention of the team of SQL Developer for a while, I had to submit a request for formal improvement on metalink:

  RE: 19834977 - IN THE UNIT TEST REQUEST TO ALLOW TO CHANGE THE ORDER OF EXECUTION OF THE START OF THE PROCESS

  Thank you

  Val

• The db cannot startup after the crash of the host

  the db does not start after the crash of the host.
  
  
  
  Please see the following logs. the strange thing is "lkinstrdmetdev" is the fake name (sid is rdmetdev), and the file does not exist in the FS too. the correct file name should be "lkrdmetdev" and I removed this file from the directory. I did not make any changes. and not just any what oralce running process while I started the oracle instance. Help, please
  
  
  
  Thu Feb 14 09:25:20 IS 2013
  sculkget: failed to lock /u01/app/oracle/product/10.2/dbs/lkinstrdmetdev exclusive
  Thu Feb 14 09:25:20 IS 2013
  sculkget: lock held by PID: 272600512
  Thu Feb 14 09:25:20 IS 2013
  Failure of the operation of the Oracle Instance started. Another process may be to attempt to start or stop this Instance.
  Thu Feb 14 09:25:20 IS 2013
  Impossible to acquire primitive serialization for start/stop of the instance
  Thu Feb 14 09:35:33 IS 2013
  sculkget: failed to lock /u01/app/oracle/product/10.2/dbs/lkinstrdmetdev exclusive
  Thu Feb 14 09:35:33 IS 2013
  sculkget: lock held by PID: 125960160
  Thu Feb 14 09:35:33 IS 2013
  Failure of the operation of the Oracle Instance started. Another process may be to attempt to start or stop this Instance.
  Thu Feb 14 09:35:33 IS 2013
  Impossible to acquire primitive serialization for start/stop of the instance
  
  
  Thu Feb 14 09:34:57 IS 2013
  Errors in the /u01/app/oracle/admin/rdmetdev/udump/rdmetdev_ora_6321.trc file:
  ORA-27050: function called with invalid FIB/IOV structure
  Additional information: 2
  ORA-27086: impossible to the locking file - already in use
  Linux-x86_64 error: 37: no locks available
  Additional information: 10
  
  rdmetdev_ora_6321.TRC
  Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  ORACLE_HOME = /u01/app/oracle/product/10.2
  Name of the system: Linux
  Name of the node: ecamolx1813
  News Release: 2.6.18 - 194.el5
  Version: #1 SMP kills Mar 16 21:52:39 EDT 2010
  Machine: x86_64
  Instance name: rdmetdev
  Redo thread mounted by this instance: 0 < none >
  Oracle process number: 0
  The Unix process PID: 6321, image: oracle@ecamolx1813
  
  14-02-2013 09:34:57.630
  ORA-27050: function called with invalid FIB/IOV structure
  Additional information: 2
  ORA-27086: impossible to the locking file - already in use
  Linux-x86_64 error: 37: no locks available
  Additional information: 10
  14-02-2013 09:35:33.039
  Failure of the operation of the Oracle Instance started. Another process may be to attempt to start or stop this Instance.
  14-02-2013 09:35:33.051
  Impossible to acquire primitive serialization for start/stop of the instance

  Check the MOS document I posted.

• process on the main window to stop running after the closure of a modal dialog box

  Hi everyone, I am new to Oracle Forms so any help would be appreciated.
  
  Here's the scenario: I'm on MY_MODALESS_WINDOW and run a trigger that looks like:
  
  ================================
  execute_trigger ('TRIGGER_1');
  If form_failure then goto FAIL; end if;
  
  show_window ('MY_MODAL_DIALOG');
  synchronize;
  raise form_trigger_failure;
  
  execute_trigger('TRIGGER_2);
  If form_failure then goto FAIL; end if;
  
  < < FAIL > >
  null;
  
  ================================
  
  -No error in compilation.
  -Here is the number: TRIGGER_2 has never been called/executed after the closure of the MY_MODAL_DIALOG?
  
  Thanks again,
  
  Published by: user12216598 on March 12, 2010 09:07

  As I said before, open a modal window does not stop execution of the current procedure. If you need this behavior, put your modal window and all its components in another form module and use CALL_FORM to open this form. Then the execution stops at the CALL_FORM statement and and will continue after the CALL_FORM when you leave the form called.

• Stops running after the recall of custom Manager runtime error

  I have written a custom runtime error handler based on the example of ErrorHandlerExample which comes with TestStand uses Teststand 2010 SP1. It has been implemented as a reminder of StationPostStepRuntimeError in my folder of reminders of the Station.  I modified the example as follows:

  (1) added code to disable the transmitter USE if it was on.

  (2) added a call to an executable that sends an email to the currently logged in user.

  (3) call the TestStand standard runtime error dialog box using the method DisplayRunTimeErrorDialog of engine.

  (4) the user's selection process, then turn on the transmitter USE for any another option and then have an abortion.

  The recall also checks the State of the break and "do not show this execution" options selected by the user.  If the user selects break so the only option I can find is to call the method of the Execution.Break () API which breaks execution there in my reminder. The user must then step go out the recall.   Is there a way to instruct TestStand to complete execution of callback and the break immediately after completing the callback (i.e.at the next step after the error)?  I have compressed upwards and attached my modified sequence.

  If not, is there a better way to do this?

  Kind regards

  David

  Had the chance to try it yet but maybe StepOut is your solution?

  The help of TS:

  StepOut method
  Syntax
  Execution.StepOut

  Goal
  Resumes the execution of a suspended state and then pauses again once the execution of the current sequence.

• Cannot logon after the start because just passing simple / 8.1 Windows logon is not displayed

  It seems that if the application passes Simple (opvapp.exe) that allows me to enter the password/user does not start after the start.

  I can't start windows in safe mode because the button F8 Mode (I tried FN + F8) is not responding.

  What alternative should I solve the problem?

  Find a possible solution:

  -Press ESC to HP connection icon

  -Choose F11 and follow the instructions to start Windows in safe mode

  You can then use the system restore to solve the problem.