Windows xp broadcom gigabit integrated controller deleted

Similar Questions

• Windows server 2008 r2 domain controller deletes printers on windows 2003 Server

  We have recently installed two new Windows Server 2008 R2 servers in our field.  one of the new servers is the new domain controller (successor of Windows Server 2003 SBS, which has been decommissioned).  There are two other Windows 2003 servers in the domain.  When we turn off all servers for maintenance and then power them back on, the print on the windows 2003 Server spooler crashes; printers are deleted and the server does not allow you to add printers.  is this be caused by some settings in windows server 2008 r2?  This happened twice, and the solution is to rub the print on the windows 2003 Server spooler and reinstall the printers from scratch.

  Hello MPF_mec29,

  Thanks for posting your question in the Microsoft answers Forum. If you have questions about Windows Server, please visit the following link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Eddie B.

• Broadcom 440 x 10/100 integrated controller Gets the error code 22 in Vista

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 22. What is the solution?

  Hello

  The error code indicates that the device is disabled.

  The solution to this problem is to enable the device in Device Manager.

  I suggest you open Device Manager.

  To open the Device Manger refer to the link below

  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Device-Manager

  (a) once you open device manager scroll down and look for network adapter

  (b) click network adapter and expand the list.

  (c) right click on the Broadcom 440 x 10/100 integrated controller and Select enable

  (d) restart the system and check if the problem persists.

• HP Pavilion dm4-2070us: network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm

  Network adapter Atheros AR8151 PCI - E Gigabit Ethernet Controller Driver Windows 10 Qualcomm
  Options
  10/11/2015-12:08 AM
  Product name: HP Pavilion dm4-2070us
  Operating system: Microsoft Windows 10 (64-bit)
  Laptop: HP Pavilion dm4-2070us OS: Windows 64-bit 10
  
  Problem with the Qualcomm Atheros AR8151 PCI - E Gigabit Ethernet Controller driver network card driver does not not on Windows 10
  
  I've had this laptop for the past 3 years, running on Windows 7 very well, but a few weeks ago, that I've upgraded to Windows 10 when the Wired internet connection stopped working. Whenever I connect the Ethernet cable in the network settings, it says 'Unidentified network' "no internet access. I tried updating the driver, uninstall and reinstall the driver, call Microsoft to help but nothing seems to work. And there is no update driver for Windows 10 on hp.com is a solution for this problem? Help, please.

  Hi Mrstenter,

  The link (atheros.cz) you provided has the same problem. However, I found solutionon the below mentioned link. He was the pilot I needed and it worked! No both my cable and internet connections don't work.

  SOLUTION: Downloaded the driverscape.com driver, double-click to open, double-click on the appliction of installation file, select the option repair the installation, and then follow the prompts. Restart the computer after installation. Mine worked.

  Thank you very much for your help.

  http://www.driverscape.com/download/Qualcomm-Atheros-ar8151-PCI-e-Gigabit-Ethernet-controller-%28ndis-6.30%29

  

• Help needed with two new HHD to RAID 1 PERC 6 / i integrated controller

  We have a client that has an out of warranty PowerEdge T610. On the Dell OpenManage Server Admin, I can see that he can see my 1 RAID PERC 6 / i integrated controller. On one of the controllers, we have a RAID 5 that has 4 discs dedicated to a data store (drive D), we two discs devoted to the Windows SBS 2008 (drive C) operating system on RAID 1.

  When we look at the server, I have physical disks located in:

  Our drive D data store:

  • 0:0:0
  • 0:0:1
  • 0:0:2
  • 0:0:3

  Our reader C found in:

  • 1:0:4
  • 1:0:5

  We just added two new hard drives for RAID 1 based on the conversation we had with Dell, they recommended that we can try from C data to the new larger disks. When to Dell Open Manage looking at the physical disks on the PERC 6 controller / i integrated, I can see that it has detected two new 500 GB SATA drives that the client installed. However the tasks available do not allow me nor their format to use as they appear in the management of the computer as a disk that is available for use. Is there something that we are completely absent here?

  Regarding the new disks located here:

  • 1:0:6
  • 1:0:7

  My options for available tasks are the following:

  • Blink
  • Unblink
  • Assign Global relief
  • Claire...

  I already have them deleted once as I didn't know if they should be formatted to be recognized, but in the computer management disk management they don't even appear at all. I thought that I had a task of 'on-line' that I could assign to the readers so maybe they appear to start to use the new storage HHD.

  With regard to the current firmware for the controller.

  • Firmware version: 6.2.0 - 0013
  • Driver version: 2.24.00.64
  • The Storport driver version: 6.0.6002.18005

  I have attached a PDF file to this post to view details on the disks. Sorry for the fine print, but it's a PDF so you should be able to zoom. Any assistance about why readers as not detected in disk management would be absolutely awesome. :)

  -Digity

  PERC does not support non RAID... you can just throw the discs and use them. You'll need to set up and initialize a new RAID array with the readers. It is not a task of "physical disk", therefore in OMSA, go to the page of the virtual disks and click the new link Wizard of VD at the top of the page to create a new VD of the BONE.

• U350 - Broadcom Gigabit does not

  Hello.

  I got my U350 today and I'm very happy with it so far. Look great and performs well. But it came preloaded with Vista - which I threw and installed Windows 7 Ultimate instead. Everything works fine - except for Ethernet (Broadcom Gigabit). I tried all the drivers out there, but this yellow question mark in Device Manager will not go away. I also tried Lenovos "driver agent" - but he gave me this message:

  After detection, we found that the following device drivers have a problem, but there is no version available at this time repair, you can leave your comments during the investigation.

  Any ideas?

  I found one that worked in the end: http://www.broadcom.com/docs/driver_download/570x/k57_vista_2k8_32-12.2.2.2.zip

  This driver is 139 KB - and it works. Pilots (packets) offers Lenovo are between 40-120MB - and they do not work.

• envy h8 1559: there is no such thing as RTL8171EH-CG Gigabit Ethernet Controller.

  Hi Hp.

  My Network RTL8171EH-CG controller do not exist in the system. I use all the command lines that I know not, but nothing.

  what I get from ip link: lo: LOOPBACK, upward, LOWER_UP > mtu 65536 qdisc noqueue State UNKNOWN mode DEFAULT default group
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00.   Is - fixable?   Tkanks

  Hi,: RTL8171EH-CG Gigabit Ethernet Controller was destroyed because I removed the video card and ram to upgrade to them.

  I bought an ethernet card external usb 3.0 and it's all good now.   Good bye.

• Windows 7: installed XP virtual window. Get Enable integration featuresfailure on start up.

  Windows 7: installed XP virtual window. Get enable integration features on start and it fails every time. Yes, virtualization is enabled in the BIOS. Yes, I uninstalled and reinstalled several times the Virtual XP window. I always get the same result. Error message: integration features have been disabled. How can I get the acceptable integration features? I tried many tools | Selections of parameters and multiple restarts of the storefront of XP and restart the computer.

  Hi kepBrian,

  It seems that there is a problem with the integration components.

  Method: 1

  I suggest you to download the components of integration for the XP mode.

  Visit the following link to download the integration components.

  http://TechNet.Microsoft.com/en-us/library/ee681616 (WS.10) .aspx

  Method: 2

  Also I suggest you to enable virtualization of hardware on the computer.

  To enable virtualization of hardware on the computer, you will need to make changes in the system BIOS.

  Follow the steps to change the system BIOS.

  a. when the computer starts, press clear key to enter the BIOS setup.

  b. now, access the virtualization tab and select Enable hardware virtualization.

  c. now save and apply the settings.

  d. restart the system and see if the XP mode works correctly.

  Note: Everything by changing the setting in the BIOS be aware on the changes you made. Unwanted changes can crash your computer.

• 10 Windows post install MIA ethernet controller

  Downloaded Windows 10

  Ethernet port died

  Wireless only works

  tried to update driver received this message "realtek network controller not found, if sleep deep mose is on please the positive cable.

  Device Manager > network adapters > shows only the RTL8188EE wireless adapter > properties > power mgmnt > unchecked allow the computer to turn off this device to save power > restart > No ethernet

  clean the re - install windows 10

  no change

  Windows C > Realtek > drivers > NO CONTROLLER FOUND > PCIE wireless LAN > update driver > no change

  site Web de Realtek > research > realtek network controller > downloaded 2nd from the bottom by search on this forum > no change

  http://www.Realtek.com.tw/downloads/downloadsView. aspx? LangId = 1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownT...

  where guys now?

  Hello @R_F_D,

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are not familiar with works of the function of the Forum, private messages
  this message has instructions.

  Good luck!

• Windows compatible xbox 360 wired controller

  Purchased windows compatible xbox 360 wired controller this seller assured me would work under Vista. But apparently not.
  I downloaded the latest driver suitable for the material and installed according to the instructions (with controller unplugged) but still no joy.  I have Vista Home Premium.  The controller is recognized and responds in the calibration utility, but doesn't seem to work for the games. Is it compatible for Vista and Modern Warefare 2?  Are only some supported games? If I lost my time & or silver?

  Only some games support a controller.  Most of the games, including pulling just support a mouse - frankly because it's much better to use a tiny stick.

  If his work all in calibration tools then the controller is working properly, unless the cod has an option somewhere to allow a controller then it probably does not support one.  His place to decide what methods of control that they want to support the game developers. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Where can I get windows XP WITH SP3 INTEGRATED ISO Image?

  My XP SP 2 cd IS damaged. Where can I get windows XP WITH SP3 INTEGRATED ISO Image?

  Hello

  If Windows XP came preinstalled on the computer, you can contact your computer manufacturer to get an installation disc integrated with SP3
  Alternatively, you can contact Microsoft support team for the CD-ROM. consult the following link.
  http://support.Microsoft.com/kb/310994
  See also:
  http://support.Microsoft.com/kb/326246

• Trying to remove the folders from Windows one system empty, but in error "is a Windows system folder and is required for Windows work.» It cannot be deleted. »

  My parents bought a laptop from a friend, and recently my father ran an antivirus program that came with multiple files in a folder that has been created by this friend. When you try to delete the folder a box appears that says "it is a Windows system folder and is required for Windows work.» It cannot be deleted. "But all the folders inside are empty and of no use to us. Help?

  The standard answer to questions that begin with «I bought a used computer...» "is you can do a clean install of Windows, because you know not what could be hiding somewhere in the computer.  In this case, it seems as if he is infected with something.

  Legally, the seller was required to give you a way to do this reinstall, but in the vast majority of the private sales of used computers, this requirement is simply ignored.

  If it's a laptop to 'mark' (e.g., Dell, HP, IBM/Lenovo) there may be a hidden partition on the hard drive that can be used to restore the computer to its "fresh from the factory" State.  Of course, this will remove all applications that the previous owner had installed after he or she has bought new, but you should still seriously to consider making such a restore, if the mechanism is available.

  What is the name and the version of the antivirus application that has detected the wrong files?
  What are the names of the files?
  What is the name of the folder that cannot be deleted?
  Are you logged on as a user with the rights "computer administrator" when you try to delete it?

  Assuming that you can not or will not do a clean install of Windows, I suggest the following (do not run scans at the same time, each analysis may take some time, depending on the number of files on the computer):

  Connect as a user with the privileges "computer administrator" and do a full scan with each of the following:

  http://www.eset.com/us/online-scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx (requires download)
  http://www.PCtipp.ch/downloads/Sicherheit/35905/multi_av_scanning_tool.html (page is in German, but the downloaded scanner is in English)

  Also download, install, update and run a scan complete with each of the following:

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• Windows mail opens the small message window when I use ctrl to delete messages mupltiple. Have to cross and close each window before I can delete.

  you are using windows vista 32. A new problem. When I try to run multiple deletes all leaky windows open in a small window. I have to go back and narrow everysmall window until I can do multipe deletes. This does happen evry time, but most of the time. the windows close in mail, then when I close the mail they appear on the desktop or open window browsers.

  Hello

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see these links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-messages-in-Windows-Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  It will be useful.

• I have an email in my windows to send that cannot be deleted or moved. When I try to do, or I get a message saying error has occurred.

  I have an email in my windows to send that cannot be deleted or moved.  When I try to do, or I get a message saying error has occurred.  This email continues all my other emails in my Outbox.  How can I remove this outgoing email?

  original title: problems with outgoing mail
  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html
   
  If still no joy, try to compact and repair the database.
   
  WMUtil
  http://www.oehelp.com/WMUtil/default.aspx

• Windows Vista will not let me delete a file.

  Attempt to remove the old program files.

  Windows says I need permission to delete files.

  There is only one user and a profile on this computer.  This profile is the sole Director.

  The dialog box does not offer the possibility to grant permission for the removal.  Said only that I need of approval.

  Do this first.

  How to take possession of an item in Vista and Windows 7
  http://www.Vistax64.com/tutorials/67717-take-ownership-file.html

  Then try file Assassin, or this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

  Work in safe mode may help as well.