Windows XP crashed, now unable to connect to the net cause usb 760 not register

Similar Questions

• I got to windows 7 Windows 10 and now unable to connect to the internet

  I connect to my router, but the warning of yellow color that I don't have an internet connection

  When I try to run network diagnostics, the message appears "there could be a problem with the driver for the connection to the Local network card", but when I click on ' try these repairs...» ', nothing happens.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• BlackBerry Smartphones has tried to update the device software, now unable to connect to the device via USB

  I tried to update my 8100 to the 4.5 software.  I first updated the desktop to 4.7 software, then tried to update the device, but the process has failed.

  Now, when I open the Desktop Manager it shows not connected to the device.  I can go to the properties of the device mamager and select the balckberry, but when I return to the destop eat it says no device.

  It seems that whatever I do, it does not recognize the usb device.

  The display on the 8100 is company information only text, no graphics or by phone, and it is virtually unusable.

  There are options on the screen for some applications, but if I choose them, it says app not found.

  Is there a way to force an update to it?  Or I poohed this phone?

  Thanks in advance

  Edit:

  I pulled the battery on the device it reboot and tried to return to a former Office Manager Update

  1. unplug BB from USB and PC. Restart the PC turned off completely.

  2. for BB, you'll charge back to the theme that was used on the device when you upgraded, which will normally give you a black and white screen. You must follow the instructions below.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• provider changed vague Qwest and now one device connects to the net.  Seems to not be recognizing the airport extreme.  Patches?

  Decided to change providers.  Network domestic fine fixed by extreme airport which has been consulted by 9 apple devices and windows device.  After the wave was installed yesterday, the only device able to connect is the cell that was active at the time of installation.  Is this a problem with my airport extreme or vague does not not with mac?  All the patches would be appreciated.

  After the wave was installed yesterday, the only device able to connect is the cell that was active at the time of installation.

  Sounds like Installer connected your laptop directly to a modem to put in place the new connection.  If that's what happened, then the modem will recognize your laptop, but it will not recognize the AirPort Extreme, then it will appear as if only your laptop can get a connection.

  The modem and AirPort Extreme should probably be reset and then set it up again. We'll know more soon.

  Can you provide the number of brand and model of the modem that was shipped with your service?

  What operating system uses the laptop?

• Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Original title: windows xp.

  reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

  Hello

  Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

  Get graphics, sound while you're there.

  You should always do a reinstallation.

  Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

  See you soon.

• HP series D110: update Apple OS Sierra this morning. Now unable to connect to the printer HP series D110 to scan.

  Apple OS update Sierra 10.12 and now unable to connect to the printer to scan. Version of the driver for HP printer is HP inkjet 1 pilot 3.3.2 can someone help me?

  @Lancer3

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer to scan does not work after the recent update of the Sierra,

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• I uninstalled mcafee, now unable to connect to the Internet.

  I uninstalled mcafeenow unable to connect to the Internet. Error messages (unidentified network) (investigating problems of modem router or broadband) (connection to the network Local is not valid ip configuration have uninstalled mcafee, now unable to connect to the Internet. Error messages (unidentified network) (investigating problems of modem router or broadband) (connection to the Local network does not have a valid ip address configuration)

  If you have not done so before, run the McAfee Consumer products removal tool symptoms not to do are not documented and are supposed to be unpredictable.  You must reinstall your new security application after completing the McAfee removal.

  Then all the least, your symptoms of failure could guide someone to be able to help.

• A ' test mode windows 7 build 7600 "ran Mr. difficulty to remove and now unable to connect to the Internet".

  Everything worked fine until "watermark of Mr. fix - it deleted now unable to connect to I Internet.» Took the floor to Internet provider tech and HP tech

  Hi Donnie,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what fixit did you run?

  2. you receive an error message or error code?

  I suggest you run the network troubleshooter and check if it helps.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  You can also see the following article for more information on troubleshooting internet connection problems:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I am now unable to connect to the internet, it seems, that has most all of the icons in my folder/window "network connections."

  It seems that has most all of the icons in my folder/window "network connections." programs can be corrupted, how to restore these

  I have been using a wireless adapter & also I can't access the utility of windows for wireless connections either, the network, I used is not visible on my computer but my laptop can connect to it

  My OS is windows XP home

  Hello

  Not 'obsessed' all history essay for where the penalty is at the moment.

  Here's how, http://www.ezlan.net/wireless.html

• Windows 7 - Excel 2010 - unable to connect to the OLAP Cubes SQL 2000

  Running 32-bit Windows 7 - Excel 2010 - unable to connect to SQL 2000 of the GreatPlains OLAP Cubes - message Getting connection refused actively.

  It works with XP and even load Excel 2010.  I can't find what I need to change in win 7.  I guess that's the firewall or driver settings.  I completely disabled the firewall and still no luck.  I also took the file to connect to the XP machine and tried to use it as an existing connection and still have the error.  I ran Excel on the Win 7 XP SP2, XP SP3 and still no luck.  I have spent hours reading and researching the issue and can not find an answer.
  I tried to change the OLAP service account and open all ports on the server.  Still nothing.  The error message will connect to the client computer and the server does not record demand, so I think that I don't yet get on the server.  I do not understand as well as if the message is actively refusing connection.
  I can run the cubes very well on the server and on the XP SP3 with Excel 2010 machine.
  I'm in my troubleshooting garnis.  There has been some problems, that I have not been able to solve in Microsoft Servers and this is one.  I know that there is an answer.  I'm just not see it.
  Thank you!!

  Hi Litiasheldon,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  SQL Server (TechNet Forums)

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer

   

  I hope this helps.

• Firefox said it is unable to connect to the net but IE and the signal is strong

  Firefox has been great until this afternoon. Then all of a sudden it gave me an error message that he was "unable to connect." "" The laptop thinks it entirely connected wireless to the Homehub. I have been in contact with BT that kept me in line with IE and say that the problem is with Firefox. I uninstalled and reinstalled Firefox and I'm still getting the message that it is unable to connect. Help, please!
  PS Firefox works perfectly on my desk.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• HP ENVY 15-k163cl: HP ENVY 15 updated to Windows 10, now unable to connect to the network

  I've recently updated to Windows 10 with my laptop (from Windows 8) and remember, Windows 8 was working fine but now that I've updated for Windows 10, I can't connect to my home network.
  
  When I turn on my laptop, it is not automatically connect to my network and when I try to connect from the network settings, I get an error "Could not connect to this network" and I have to wait at least 30 minutes before it automatically logs. After waiting that it works, but my laptop goes to sleep or goes inactive for awhile, it disconnects again and I have to wait
  
  I connected via hotspot and it worked fine, but all of my other computers laptops HP connects very well and they are 10 Windows as well. Only this laptop is upward, so I guess it's a problem with a new driver.

  Hello:

  The only suggestion I can offer would be to install the latest driver for the Intel Dual Band Wireless-AC 3160 adapter - 802.11 and see if that helps any.

  The 2nd driver on the list is W10 x 64.

  https://Downloadcenter.Intel.com/download/25513/Intel-PROSet-Wireless-software-for-Windows-10

• Just installed SP2 now unable to connect to the internet.

  I have a Sony Vaio laptop and just intstalled SP2 last night now I am not able to connect to the internet via ANY mode.  I ran scan and found corrupt files, but could not be fixed...

  If you had read all my 1st answer, as you say that the problem was caused by SP2, try this:

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Wireless adapter worked fine. Now, unable to connect to the Internet.

  I have a wireless connection to internet via my home last night my laptop was working fine but when I turned on my laptop today its not not reconizing adopting what should I do?

  Hello

  1. Changes to the computer before the show?
  2. Is there an error code or the message that if displayed when it is unable to connect?
  3. What brand / model of the adapter?
  Method 1:
  Check out the link and follow the steps.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
  Method 2:
  Visit the link and try the troubleshooting provided steps.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Method 3:
  Check out the link and follow the steps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems