Windows XP is no longer valid after having repaired. Now I can't turn it on.
Caught in the loop of authentication!
Hello
1 have had no hardware changes to the computer during the repair?
2. What is the brand and model of the computer?
3A you repaired your OEM computer or store local tech?
Check out these articles.
How to activate Windows XP
http://support.Microsoft.com/kb/307890
See the section titled: "how to activate Windows XP by phone.
Also, make sure that you do not confuse the letters and numbers (number 8 for the)
Letter B, etc.)
How to contact a Microsoft Product Activation Center:
http://support.Microsoft.com/default.aspx/KB/950929/en=us
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
Tags: Windows
Similar Questions
-
Re-installed Windows XP Media Center Edition and now I can't turn it on with my product key.
I REINSTALL XP MEDIA CENTER EDITION
AND I GOT A FEW SCRACHES ON DISK. SO I REPAIRED THE INSTALLATION WITH XP PRO. NOW I CAN'T ACTIVATE WINDOWS TO ALL THE... WHAT CAN I DO TO FIX THIS?
original title: REINSTALLED XP MEDIA CENTER EDITION, HAD A GLITCH AND USED XP PRO FOR INSTALLATION of REPAIR, NOW I can NOT turn ON WINDOWS
Upgrade installing XP Pro Media Center of in the Windows environment. Just start the installation of XP Pro computer and then insert your Media Center CD in the CD-ROM drive and upgrade the installation, provide the Media Center product key when you are prompted. If this fails, you will need to install from a flat folder, post again if the upgrade fails and we can give you the flat installation instructions.
John
-
original title: activation problem
-I got my product key Windows 7 enabled on my computer, then my hard drive crashed, so I had to reinstall Windows on a new hard drive. He is now not letting me turn it back on. What should I do? I don't want my computer or Microsoft thinks I use a version of Windows
It is Windows 7 Home Premium, and I my here in front of me activation code. But it is to say that it is not valid.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
-
Portege Z930: Loss of Fn keys after upgrade to win 8 - can't turn WiFi switch
After several months waiting for my hour I just began my Portege Z930 - 11G for Windows 8 Pro upgrade.
To a large extent, it went to the plan except that, after execution to display the Assistant Toshiba Upgrade I lost the Fn key and about half of the keys no longer seem to work at all.
The only key I've ever used on a routine basis is the Fn + F8 option to activate the power switch WiFi.
So now, I can not turn on WiFi on the computer.
It must, surely, that there be a way to do it, but I'm not. Does anyone have a suggestion? I'm OK for now because I have a local cable system in the House, but once I get out on the road I will fight without WiFi.
Before running the wizard upgrade of the Fn key grew up the key appear in the upper part of the screen and I want to surely I had turned on WiFi right here.
The Fn key utility offers very little control of the Fn keys. It does not offer the possibility to do anything else than to disable five notifications screen for keyboard backlighting, power plan, touch pad and cursor overlay digital overlay.
Any help gratefully received.
Andrew
> So now I can not turn on WiFi on the computer.
First of all, you can enable and disable the WiFi using the function key, but you can also activate the WLan settings of Windows 8
Key Win + C-> settings-> change PC settings-> wirelessNow, you can use the cursor to wireless devices to enable or disable the WiFi network.
But to get the FN button work you need to install the + Toshiba function key + Utility for win 8 and + Toshiba system driver + to win 8
-
just downloaded windows 7 ultimate throught (the anytime upgrade feature) and now it won't turn on... Please help
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
My creative cloud app wouldn't update so I followed the instructions to uninstall, clean and reinstall and now I get an error code 43 after 2%. Now, I can't reinstall all the apps. Is there something im missing? IM on a mac.
Please refer creative cloud re-install - get error 43
Concerning
Hervé Khare
-
My windows 7 is not valid after windows 10 has been downloaded on my PC and I went back to Windows 7? Never had this problem before. What is going on???
How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10
-
Windows Vista will not be validated after clean install
Windows key, title: product original vesta H P,.
buy windows key, product vesta p h, it will not be validated after a clean installation, only to discover, to upgrade only, that cost me $ 160 in two, three years ago, can aney help, how to fix this, davie.
Hi David,
Install and activate the original operating system provided with the computer first (I guess it's XP).
Update to upgrade to Vista, then use the Vista product key that you used at the time to update (because it works now as you WILL upgrade and do not try to install only a facility full after an installed clean).
Good luck!
Kosh
-
Windows is no longer enabled after startup repair!
Specifications of the computer: SL500 (model M 274633)
2.26 Ghz dual core, Intel Centrino 2
nVidia 9300 M GS
2 GB of RAM
I got a shock a week ago... Windows won't load and repair and recovery 4 commissioning. Ok... I tried Startup Repair tool because it seemed reasonable... It worked. Sort of.
My version of Windows is enabled is no more, and even more annoyingly, because the key has already been activated Windows refuses to accept the current key!
Now, Windows tells me I have the rest of today to activate... I gave in after that system restore has failed so that it starts every time and used R + R4 and tried to "restore to the factory. Which failed.
That may have to do with the fact that I created my restore disks... However, I can not really on for about another week and a half restore disks, these are my holidays.
I desperately need to keep my system intact, it is my lifeline. I live on an isolated island and this is my only form of communication with everyone, as being the main thing that I use for work or school.
Can anyone help?
Well, after spending some time on the ' net and pouring through hundreds of sites I came upwards with a fix "semi".
I said I have type in a 'new' key when Vista application be activated first and the type of the key on the bottom of my computer.
It works! Vista activated!
Now however in the lower left corner of the screen there is a warning.
Windows Vista (TM)
Build 6002
This version of Windows is not genuine.
Very confused... There is absolutely no chance that it is a cracked version of Windows... I got it from a retailer of office.
-
my copy of Windows Vista is no longer valid
I added a few readers to my computer and now it will not be validated. At least, I think that's what happens when I try to download an update.
I tried to download and save the updates manually and now I can't do it. If it is always updated from Windows Update.
When I tried to validate it just went to the home page of Windows, so I don't think that he accepted my validation.
Try to activate Vista manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
5) stay on the phone (do not select/press options) and wait for a person to help you with the activation.
(6) clearly explain your problem to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.---------------------------- Alternatives -------------------------------------
Microsoft Activation centers worldwide telephone numbers:
http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
(This site is for activating Volume License, but if you call, they will help you)The phone number is not working:
Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspxActivation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048J W Stuart: http://www.pagestart.com
-
Security certificate is no longer valid after the upgrade to the latest FF.
I've upgraded to the latest version of FF over the weekend and now I can't access a site that I had been accessing for the following error message:
An error occurred during a connection to grdpmgr01.dmz.domainname.com:7799.
The issuer certificate is not valid. (Error code: sec_error_ca_cert_invalid)The certificate is self-signed. We have a similar problem with IE that we by-passed.
You can try setting security.use_mozillapkix_verification to false on the topic: config page as a test to see if it has an impact.
-
All the sudden, iTunes has stopped responding. I click top and nothing. I spent over an hour with a Senior Engineer at Apple's Support, which does not give me a ticket number so now Apple can't even find the person I talked to. This person had to remember and it's been 2 weeks. I called Apple back Support and since they can't find a ticket number they told me that I have to wait until this person reminds me. This engineer had me remove and reinstall iTunes with all the other components that go with it, I run it as administrator, pretty much did all the troubleshooting I had done on my own. I have now to sit and wait, hoping that this senior engineer at Apple called me back. It's poor and poor support for iTunes. If anyone has any advice, please share.
Thank you
These can be things that you've already tried. Despite this, it might be interesting to try again. As another poster has said recently, though for another problem, "20th try was the charm.
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
After having added THAT MSAD can not connect to the console
Hello
We have added a new security provider in weblogic (OBIEE 11 g), after rebooting the server, we can not connect to the weblogic console.
When we enter username and password, it crashes.
How do they get the security without connection provider in the console?
Thank you!Neal, you need the admin credentials to connect to the server and make the changes.
Because you can not even connect, it's the only way... If you want to make the changes for you can send me your config.xml file -
Windows install the latest updates on my phone and now I can't access the internet
Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access. I tried both with the wired and wireless options and nor will not work. Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates. While I am not very confident with the work on the computer would like some advice on the best way to go.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understanding Windows Update and Extras in Windows Vista at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Problems with system restore:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
1. If you use Norton (Etc), disable it before using System Restore. info at the link above.
2. try SR in safe mode:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
3 Malware will stop at the system restore:
If necessary, do all the work Safe Mode with network.
To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight.
See you soon.
Mick Murphy - Microsoft partner
-
Windows 7 Starter key no validated after uninstalling windows 10 due to problems. »
After recently portable free update on windows 7 starter to windows 10 edition there was an error where I was unable to connect to the internet somehow and I tried all the basic troubleshooting I could do online, I decided to go back to windows 7 so uninstalled windows 10.
After it rebooted I had to re-activate and validate windows and happens now is not a valid product key, even though he had checked before installing windows 10, he was a version authentic and valid?
Please help as this was nothing else that a huge drawback for a product that was supposed to improve my windows experience.
Here's a copy of windows made diagnosis.
Diagnostic report (1.9.0019.0):
-----------------------------------------
Given WGA-->
Validation status: invalid license
Validation code: 50Cached Validation code: n/a, hr = 0xc004f012
Windows product key: *-* - FJT32 - QMPGB-GCFF6
Windows product key hash: KGSsbuo1 + 06XJlvCBpYnFCqWv54 =
Windows product ID: 00342-OEM-8992752-30004
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.011
ID: {C49E1397-AC77-4E38-960A-2CB7711350CD} (3)
Admin: Yes
TestCab: 0x0
WGA Version: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Starter
Architecture: 0x00000000
Build lab: 7601.win7sp1_gdr.151019 - 1254
TTS error:
Validation of diagnosis:
Resolution state: n/aWgaER data-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002WGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 100 authentic
Microsoft Office Enterprise 2007 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\wat\watux.exe[hr = 0 x 80070002]
[File mismatch: C:\Windows\system32\wat\watweb.dll[hr = 0 x 80070002]Other data-->
Office details:{C49E1397-AC77-4E38-960A-2CB7711350CD} 1.9.0019.0 6.1.7601.2.00010300.1.0.011 x 32 *-*-*-*-GCFF6 00342-OEM-8992752-30004 2 S-1-5-21-670680171-2696473454-3771967423 Acer Extensa 4620 Phoenix Technologies LTD. V1.20 20070926000000.000000 + 000A2313D07018400FA 0809 0409 GMT Standard Time(GMT+00:00) 0 3 ACRSYS ACRPRDCT 100 100 Microsoft Office Enterprise 2007 12 900A69EF54B6D86 CAwivVv8J/4/ooiU5ft7cR3fnOw = 89388-707-8518193-65273 14 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Starter edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: 8be4a481-9b5c-4588-a5ec-5dad4b1f15da
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00342-00178-927-530004-02-2057-7601.0000-1302011
Installation ID: 004121863841498841921503526665928846723584339431115322
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: GCFF6
License status: Notification
Reason for the notification: 0xC004F07C.
Remaining Windows rearm count: 3
Time to trust: 2015/12/28 15:10:49Windows Activation Technologies-->
HrOffline: n/a
HrOnline: n/a
Beyond: n/a
Event time stamp: n/a
WAT Activex: Not registered - 0 x 80040154
WAT administration service: not registered - 0 x 80040154--> HWID data
Current Hash HWID: NAAAAAEABAABAAIAAAABAAAAAgABAAEAJJQywUioBgyK51qqRoMEjY4DsIDOqfxzpgoqhQ ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC APIC PTLTD
FACP INTEL CRESTLNE
HPET INTEL CRESTLNE
START PTLTD $SBFTBL$
MCFG INTEL CRESTLNE
TCPA Intel CRESTLN
DOCUMENT TMOR PTLTD
SLIC ACRSYS ACRPRDCT
ASF! OEMID OEMTBL
SSDT SataRe SataAhci
SSDT SataRe SataAhci
SSDT SataRe SataAhci
SSDT SataRe SataAhci
SSDT SataRe SataAhciPlease see the bulletin:
How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10
Maybe you are looking for
-
Need to pull the inventory since the Profile Manager
We have 125 + ipad devices in the Profile Manager. I would like to export the name ipad, carrier no_serie and cell phones and other cell Info for all devices in a text or CSV file. I can go to the details of each instrument section and manually sea
-
MFP M277 dw: Color LaserJet MFP M277dw Pro issues with iMac
I have a 2015 21.5 "iMac running El Capitan (10.11.3) and a HP Color LaserJet Pro M277dw MFP that falls in offline mode when it is idle for a while. Once the Mac has been sleeping, I can no longer copy, scan or fax without having to restart the print
-
Hi, I just bought Dm11 drum machine apple app, how do I configure for use in Garageband?
-
C:\Windows\idibl2.dll module from specified could not be found.
I get this message on each start of XP. Cannot get rid of it and don't know if it's a serious problem. I tried all kinds of malicious software tools without result. Should I just ignore it? Thanks for any help and advice.
-
Microsoft L2TP VPN to ASA 5520
I am trying to configure an L2TP VPN connection on an XP laptop. On the SAA, I use the DefaultRAGroup and the DfltGrpPolicy. I put DefaultRAGroup to use a pre-shared key, and set the authentication of users on ACS_Radius. Our ACS server is associated