Windows XP mode, could not complete Setup for first use

Similar Questions

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• Windows XP Mode Setup for first use

  I uninstalled reinstalled windows 7 and uninstalled then reinstalled Windows XP Mode and Windows virtual PC several times. Start the Windows XP Mode runs until almost the end of the install and then stops by saying that it can not install XP mode try again. I have 2 drives are all my old XP files it is new. Windows 7 has been loaded on the diving again. I have Windows 7 with the opportunity to make this XP mode because I have files on my drive hard xp.

  How do I get this to set up so I can use it. Thank you

  Hey Norm,

  Thanks for posting your query on the Microsoft Community.

  I understand that you can not install Windows XP Mode in Windows 7.

  This problem is better suited in the TechNet forum. We have a dedicated team with advanced tools and permission to help with this issue. Then I suggest you to report the same query in TechNet forum.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Feel free to post your questions in the Microsoft forums for further assistance related to Windows. We will be happy to help you.

  Thank you.

• When iTunes open get error, windows service install could not be accessed.

  Fatal error during Installation
  When I try to open I-Tunes, I get the message that the windows service install could not be accessed.  This can occur when windows is running in safe mode or windows installer is not installed properly.

  I followed these steps and the programs have been removed form the revo uninstaller list but it still appears in the windows Uninstall list and I get the same error when I try to uninstall it - windows service install could not be accessed.  I used revo to uninstall another program and it worked and disappeared in the two lists.

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.

  I upgraded my 64 new image computer windows 7 Home premium Edition to windows 7 using the upgrade anytime professionoal.  I downloaded the fix for quad core to use virtual pc and windows xp mode.  When XP is "windows xp for first use mode setting" it loads to 99% and then I get the message "unable to complete Setup.  I service request # 1182160056 but the phone lines of microsoft do not work.  Any suggestions?

  Have its possible that this is a download corrupted Windows XP mode, you tried to download it again and see if it works? Also, make sure that you first install Windows Virtual PC.

  Click Start, type: enable or disable windows features

  Press enter on your keyboard

  Scroll down and make sure that Windows Virtual PC is checked.

  Click OK

  Restart if prompted.

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

• Sysprep is not - Windows could not complete the installation

  Original title: Sysprep failed

  I started a sysprep on my windows7 pro computer restarts and says

  From Windows, it jumps to "Setup prepares your computer for first use.

  After 5 seconds an error occure

  / "Windows is unable to complete the installation. To install Windows on theis compuiter, re-run the installation. »

  I press Ok and it says installation continues after the reboot.

  and in this loop im stuck.

  Is it possible to do a new sysprep without getting the OS to start?

  Hello Simon,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  Your computer is connected to a domain network?

  Thank you for details on the issue.

  Preparation system (Sysprep) tool prepares an installation of Windows for duplication, auditing, and customer delivery. Duplication, also called imaging, allows to capture a customized Windows image that you can reuse throughout the organization. Audit mode allows you to add additional device drivers or applications to a Windows installation. After you install additional drivers and applications, you can test the integrity of the Windows installation. Sysprep also allows to prepare an image to be delivered to a customer. When the customer boots Windows, Windows Welcome starts.

  You can check the suggestions of MarkBeacom responded on 28 June 2012 and Mark l. Ferguson responded on November 3, 2009.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-could-not-complete-the-installation-to/bf09c3c5-298B-459F-AED5-4f431b8398f5

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Vista: Windows could not complete the installation. Reinstall Windows. Stops at CRCDISK. SYS in safemode, all the time.

  A hard drive the HP dv2915nr laptop was dead. Installed a new hard drive and use the HP recovery CD. installs for 4 hours and then stops: Windows could not complete installation. Please re - install Windows again. Each facility is 4 hours. Because another install and it took 4 hours and then it restarts and stop at the same error. Now, I'm administrator (locked) - turn off when I pop in the recovery CD. Message: Your account has been disabled. Please, see your system administrator. I tried Safe Mode and loading Windows files stops at crcdisk.sys all the time and then restarts and displays: Windows could not complete installation. Please install again. Can't go in the office. Only restarts with these messages. Asked HP cat (3) Tech people and they do not have the answer. Said, could be a compatibility issue with the software. I ordered this CD of recovery on their part and he got yesterday. Now, they send in the laptop. So tried advice here. Please notify.

  I found the answer. HP Tech Support Chat did not know the answer. When you run HP recovery CD, don't hit the restart WINDOWS button when it asks. The software will do it for you automatically. It will take a while (several hours 1-6 hours) to complete. You'll know it's done when WINDOWS ask you information of language, country and keyboard. In other words, don't touch anything once you start the restore CD program. Leave it alone and it will fix it for you. IGNORE the pop-up restart.

  I can't believe HP has not even tell me that and 3 chat sessions with them was a waste of time. Last HP person ask me to send in the RECOVERY CD and the laptop.

  No help from anyone on this issue. :(

  BUT I thought about it. :)

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• Windows could not complete the installation - Message in Vista 32

  Windows could not complete the installation. To install windows on this computer, run the Setup again.

  I get this message when I switch on my compaq CQ40 with Vista 32. From this screen, I can go into Manager tasks and go online, see the program files on the C: drive, change passwords, etc. Anything except support Vista. I just downloaded and installed SP2 via the Task Manager. Always stops after the Welcome screen. Another thing I never noticed before: during the boot and just after opening orb, the Welcome to Windows message lights up with the small circle of progress, then I hear a sound of gong just before startup fails. Curious. Any help out there?

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• "Windows could not complete the installation", Y510P

  Hello

  Just got my new Y510P and realized it's impossible to start Windows.

  Initially it displays error "Windows cannot parse or process Unattend...» [... \unattend.xml] [oobeSystem] pass... »

  After reboot he start to display a different message - "Windows could not complete installation, restart the installation.

  The operating system is Windows 8.1.

  Looks like I'm not the only person having this problem. System recovery does not help, of course (as well as the graceful Lenovo tech support).

  I think that the problem caused by the incorrect unattend.xml file that fails to install any software because of this error and unnesessary blocking Windows to complete the installation.

  I see no other way rather than installing Windows from another source. I don't want to pay for another Windows license and instead return the Lenovo laptop, but perhaps there is another way?

  Problem solved.

  I contacted Lenovo support and they offered me to send recovery discs I received a few days later. I installed the cleaning system of records and have not experienced any problems since.

  I'm still not fully satisfied because I cannot reset the laptop to the factory settings without these discs, but I think I can live with that.

• Error 0x8007054F code: could not install SP3 for Windows XP

  original title: error 0x8007054F code: could not install SP3 for Windows XP because of the Filec:\windows\system32\drivers\acpi.sys being open or being used by another application. "Internal error."

  I tried to install Windows Service Pack 3 for Internet Explorer8. When you try to install this "priority" update, it begins the installation process, and then returns could not install Windows Service Pack 3 due c:\windows\system32\drivers\acpi.sys file is open or in use by another application. Internal error 0x8007054F. The only thing I have running in this case is the Internet (where I go to get the update) and the windows installation progress. What should I do to get past this problem? Please help me...

  Your loyal customer

  Hello

  
  To work on the issue, refer these methods
  
  Method 1:
  
  Read the following article.
   
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  
  Method 2:
  
  Error messages when you try to install Windows XP Service Pack 3: "Service Pack 3 installation did not complete" and "an internal error has occurred."
  http://support.Microsoft.com/kb/949384
  
  Registry warning:
  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
   
  See also,
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
   
  Hope the information is useful.

• Error messages: specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL

  I get two error messages when windows is loaded.  Specified module could not be found for c:\windows\system32\tuvujuka.dll and c:\PROGRA-1\MYWEBS-1\bar\4.bin\M3PLUGIN. DLL
  How can I fix?

  Hello

  • When you receive this error message?
  • What were the changes made before the issue started?

  I suggest you make a system full scan just to be sure.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.