WINDOWS XP MODE - WINDOWS VIRTUAL PC - could not enable integration features

Similar Questions

• Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode,

  Please help with the problem of itunes

  Whenever I try to install itunes 64-bit, my computer says "windows service install could not be accessed. This can occur if you are running windows in safe mode or if windows install is not installed correctly "...  I tried everything that the computer does not work please help as soon as possible, thank you

  Hello

  • What version of Windows are you using?
  • This happens with this program only?
  • What were the changes made before the problem occurred?
  You can check this link:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Error "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. »

  Crazy became Windows Installer

  have windows Xp Sp 3 and when I want to uninstall or install a program error message appears saying that "the Windows Installer Service could not be accessed. This can occur if you run Windows in Mode safe mode or if Windows Installer is not installed properly. Contact your support team. "and I are not in safe mode when I try to install or uninstall programs.  I checked for a virus and found that none please help because I want to uninstall some programs to free up disk space.

  Original title: Windows Installer Service could not be accessed error during installation or uninstall a program

  Hi, Honorine,.

  Follow the steps listed in the following article:

  Error message when you try to add or remove a program on a computer that is running Windows XP or Windows Server 2003: "the Windows Installer service is not to be accessible.

  See also:

  Problems installing and uninstalling programs on Windows computers

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• SFC windows file protection could not run a scan of protected system files

  Hello

  First of all I am sorry for my English

  My problem is the application of file system auditor

  When run in the console, I get this message:

  Windows file protection could not initiate a scan of protected system files

  the specified error 0x000006ba code [the RPC server is unavailable]

  I also test the problem in safe mode and get the same message

  even I check the "SFCDisable" registry key and set it to zero but not solved the problem

  do you have any idea?

  Hello

  Try this:
  Click Start , then run... and type cmd and press enter.
  Now, type enable RpcSs SYSTEM_AUTO_START and press enter.

  Restart your PC and see if you can run sfc.

  If not then try a chkdsk which is what helped me with the same question :)

  --> I hope this helps! Please mark it as correct answer or vote if it does :)<>

  http://www.pcuk.biz - my website
  

  Info from Microsoft about phishing . Information from Microsoft on the fake security software

• The Windows Installer Service could not be accessed

  Original title: I get this message: when you try to install a software like Microsoft Plus! for Windows XP or Microsoft Office 2003, Microsoft Windows XP, you may receive the following error message:

  I can't update my programs or even my anti virus...   I get the following message...

  The Windows Installer Service could not be accessed.
  This can occur if you are running Windows in safe
  mode, or if Windows Installer is not correctly
  installed. Contact your support team.

   

  How do I change to run in safe mode Windows... is it still a good thing to do?

  Hello

  Please follow the links below and check the issue:

  Error "Windows Installer service could not be accessed" occurs when you try to add or remove a program in Windows XP or Windows Server 2003:

  http://support.Microsoft.com/kb/315346#method3

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  For reference:

  Error message "the Windows Installer service is not be available" when you try to install Office

  http://support.Microsoft.com/kb/324516

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  I hope this helps.

• Cannot open documents of microsft because the Windows service install could not be accessed

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

  Try to download and install Windows install
   
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
   
  The version you need for XP is the bottom of those listed.

  wrote in message News: * e-mail address is removed from the privacy *...

  I can't open microsoft outlook or any office document: the following message "the windows service install could not be accessed. This can occur if you are running windows in safe mode or if Windows install is not properly installed. Please contact support for assistance.

• SFC/scannow stuck at 70 percent and I get the message "Windows Resource Protection could not perform the requested operation".

  Original title: whenever I run SFC/scannow I get to 70 percent and I get the message "Windows Resource Protection could not perform the requested operation". How can I fix this problem and complete the scan?

  Please answer with repair options and details on where to go to get there.

  If safe mode can't complete, it can be continuous malware (run malwarebytes) so clean, you will probably have to run a repair installation.

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

• Error message - windows service install could not be accessed

  I am trying to download itunes to my new computer.  I get an error that says "windows service install could not be accessed.  This can occur if you are running windows in safe mode or if windows install is not properly installed.  Request technical assistance"I'm currently running Vista Home premium SP2.  Any ideas?

  Hello

  Update current Windows Setup.

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  And needed the problems:

  "Error 1719. Error message could access the Windows Installer service"when you try to add
  or remove a program
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;315346&product=winxp#KB4

  Spotlight utility Windows Installer CleanUp Utility
  http://TechNet.Microsoft.com/en-us/magazine/2008.08.UtilitySpotlight.aspx

  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301

  --------------------------------------------------------------------
  I would also clean the possible general corruption.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Run the SFC and Chkdsk to ensure that corruption is disabled.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• When iTunes open get error, windows service install could not be accessed.

  Fatal error during Installation
  When I try to open I-Tunes, I get the message that the windows service install could not be accessed.  This can occur when windows is running in safe mode or windows installer is not installed properly.

  I followed these steps and the programs have been removed form the revo uninstaller list but it still appears in the windows Uninstall list and I get the same error when I try to uninstall it - windows service install could not be accessed.  I used revo to uninstall another program and it worked and disappeared in the two lists.

  Any other problem iTunes, contact Apple with their software:

  http://www.Apple.com/support/iTunes/

  See you soon.

  Mick Murphy - Microsoft partner

• Error message "Windows Resource Protection could not perform the requested operation" when running SFC scan.

  As suggested, I tried to run scannow to repair Windows Vista.  I did, but then the scan only ran up to 76%, I received the message: Windows Resource Protection could not perform the requested operation. "How can I complete the scan and fix my Windows Vista computer

   
  Hi rdoran,
  You perform the steps from the administrator account?
  
  To determine which files can be repaired by the System File Checker tool, follow these steps:
  Step 1:
   
  NOTE: When SFC is running, it records its actions in the C:\WINDOWS\LOGS\CBS\CBS. NEWSPAPER. You can find specific entries of SFC searching [SR] tags in the newspaper.
  
  For how, see the SFC analysis details in the CBS. JOURNAL:
   
  * Open an elevated command prompt.
  
  * In the elevated command prompt, type findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > %userprofile%\Desktop\sfcdetails.txt and press ENTER.
   
  * Close the elevated command prompt.
  
  * Click the sfcdetails.txt file just set your desktop to see the SFC scan details (those with the tags [SR]) to the CBS. NEWSPAPER.
   
  * You can safely delete the sfcdetails.txt file later if you wish.
  Reply back with the details in the log file.
  
  If it does not help to complete the scan, you can complete the steps below and check out them.
  
  You're able to boot in safe mode ?
   
  Step 2:
   
  For more information on how to log in to safe mode, see the following Microsoft article:
   
  Startup options (including safe mode)
   
  If you're able to boot in safe mode, you can perform a scan of the file system (CFS) auditor.
   
  Reference:
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  
  Step 3:
  
  In addition, you can connect to the command prompt and check the drive for errors, and check if that makes things more simple.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
   
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error-"Windows Installer Service could not be accessed. This can occur if the windows installer is not installed properly.

  Original title: Windows 7 critical updates

  A number of critical updates made automatically in the last two days.  He was stuck in a loop "failed to install...". "for hours.  I tried to make it a point to restore in safe mode, and it is stuck in a loop (more than 12 hours).  I tried to uninstall and it won't let me.  Now I get "Windows Installer Service could not be accessed.  This can occur if the windows installer is not installed properly. "If I turned off the computer and do not ne pas demarrer start in safe mode, shut up always on the original"failed to install ".  I need help!

  Windows restore points have never been of any property,

  Images of a completely separate hard drive system would be easy to undo this question

  It's so time spent to create system images before downloading and installing windows updates

  http://www.SevenForums.com/tutorials/219533-troubleshooting-Windows-7-failure-boot.html

  http://www.Macrium.com/reflectfree.aspx

  https://www.YouTube.com/watch?v=KQA7NlLvxg8

  If you need to reinstall windows

  It is expected by M$, we must now jump through hoops to clean install.

  http://www.ZDNet.com/article/sticking-with-Windows-7-the-forecast-calls-for-pain/

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-Update-remains-at-checking-for-updates/ff3c442e-79a6-40d3-AC35-29e130cebef1

• Windows Installer service could not be accessed - error in Windows 7

  Ladies and gentlemen,

  Currently, I get the following error when I try to install any program in the system:

  "The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

  Msiexec running from the CMD prompt indicates the verion is Windows® install. V 5.0.7600.16385.

  The service runs. I tried to unreg and regserver via safe mode.  But the error persists. The register indicates the path to the correct image for the msiserver. The service seems to work very well.

  I can't locate a download of version 5 of the MSI installer. All the references found are versions 4.5 and earlier versions.

  I can't run install it Cleanup utility because f of course, it does not allow me to install it. I'm running Windows 7 Ultimate.

  Thanks in advance for your suggestions.

  All users have this problem?  Have you tried another user administrator to see if they have better luck than your current one?

  Have you tried the System File Checker or restoring the system?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  See if something is in conflict with your access installation Service. maybe even Malware?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  See if any of these options will allow you to run with higher privileges .msi file?

  Context menu "Run as administrator" for Vista MSI
  http://www.Symantec.com/connect/downloads/MSI-run-administrator-context-menu-Vista

  Can you extract the files and find a right click on Setup.exe and "Run As an Administrator"?

  Try this from an elevated command msiexec /a prompt (and enter in your full path for the .msi file)

  How to: extract files from an .msi file by using the Windows command line
  http://thebackroomtech.WordPress.com/2007/08/23/HOWTO-extract-files-from-a-MSI-file-using-the-Windows-command-line/

• Parse error SFC "Windows Resource Protection could not perform the requested operation".

  Original title: my computer is messed up, and I'm unable to fix
   
  (1) double click on files will open in a new window
  (2) not possible to delete several records
  I tried to find and implement several solutions found on these forums for the 1st problem listed above. I tried to go into folder options and disable double click open files option and I tried to replace with original system files according to the http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folders-open-in-new-window-despite-folder-option/5fba3897-7655-4068-8992-2d8b20063b3f and nothing has worked. I tried to run the command prompt in administrator mode to scan files using the command "sfc/scannow" and even that did not work, as when checking for 59%, it says "Windows Resource Protection could not perform the requested operation"
  I tried to create new administrator user accounts and the problem persists.
  I am also unable to delete some files. Internet Explorer would be my best and later example. I ran microsoft update, it installed IE10, and I was unable to start IE. I have not found in the list of uninstaller, so I tried to delete the files manually but Icould do not, that I needed approval from "TrustedInstaller". I played a bit with permissions and gave myself all permissions, with the exception of special permissions (which was grey), and then he said I needed the permission of 'Administrators' when I tried to delete the folder. Well, I'm on my administrator account, what the devil?
  I ran some virus scans of Malwarebytes Anti-malware, Virus of Sophos, Microsoft Security Essentials, and 2013 Bitdefender removal tool and removed something taken before implementing ALL the solutions mentioned above attempts. Try a system restore after that these scans completed, I discovered that I had no restore point before the installation of the Microsoft fix - it (i.e. when I was first trying to tackle these questions)
  Is there something I can do?

  You could make a backup of the image to a DVD or disk.

  Renee

• trying to install my new printer wireless, keep saying window installation service could not be accessed.

  trying to install my new printer wireless, keep saying

  Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
  I'm not running in safe mode...

  Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...