Windows XP refuses to copy files during the installation of the OS; gives error 800b0100 at the end... Uh, help?

Similar Questions

• Pavilion a409.uk fails to copy files during the installation of XP.

  Hello

  I have a Pavilion a409.uk, which is a failure during the installation of Windows XP Professional SP2

  I get a file copy error "Setup cannot copy the file sqls20.dll.

  This is a clean install, deleting the previous partitions and create a new installation.

  I do not have access to any original CD, I use genuine XP CD with SP2 preinstalled.

  I tried same CD and I get exactly the same error.

  Tried a CD of XP (SP1) same error, different file...

  Tried a CD even before (pre - SP1) same error, different file.

  Thinking that it is not the disc, I tried to replace the Ribbon IDE, no effect.

  Tried to replace the CD player, no effect.

  Tried to replace the HDD, no effect.

  The HARD disk is a regular IDE device, with a 80 Ribbon IDE wire.

  It's not a SATA drive and as such, there is no need to load additional drivers for only install.

  Tried to find any idea on the HP site, none showing that I can see.

  Before I write off that box, anyone got any ideas?

  Thank you very much

  I came across it once and after that much hair pulling it is a bad stick of memory. If you have 2, try removing one and try the install again. If the same thing happens to pass the memory sticks & try again.

   

   

• Error-43/204 (access to a critical file during the download problem) HELP!

  I have a Dell Inspiron 5000 Series notebook PC with Windows 10 15. I have a problem downloading / installation of Adobe products. Whenever I try to download lightroom on my computer laptop error 43/204 keeps popping up and I've known idea how to solve the problem. Can anyone help?

  Hi Staceyn23289350,

  Please follow https://helpx.adobe.com/creative-cloud/kb/error-43-installing-creative-cloud.html

  https://helpx.Adobe.com/creative-cloud/kb/download-update-errors.html

  https://helpx.Adobe.com/content/dam/help/attachments/Creative_Cloud_for_enterprise_Service _Endpoints.pdf

  Please write to us if you encounter any questions!

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Unable to install Windows Vista, the system freezes at copying files and the extension of the files

  Original title: Setup error

  So I installed window vista Ultimate edition on my Mac, like two windows. I backed up all of my hard drives. so when I started to install everything went well until when it came in part from extension of files and copy files to the * something *. After like 20 minutes I had this error saying could not complete the installation because of corrupted files or something and then he is out. I tried homebasic, home premium etc. but I received an error even for each other. I went to the dealer where I bought the cd, returned and got another but still have the same thing

  Hello

  ·        What are your system specs?

  ·        How you try to install windows vista on the system? After the start of the desktop?

  ·        What is the exact error message that you experience when the system hangs during the installation?

  I suggest you to disconnect all external devices that are connected to the system such as (printers, scanners, etc.) and see if the problem is resolved.

  This occurs mainly, if the system (hardware or software) is not compatible with the operating system that you are trying to install on the system. I suggest you to format the partition in which you try to install Windows Vista, and then check if you are able to install the operating system or not.

  Installation and reinstallingWindows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I suggest you to check the below link.

  http://social.technet.Microsoft.com/forums/en-CA/itprovistadeployment/thread/6cb6510d-3e4f-4611-ba73-7e68fc4aa0a6

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to copy files to the Sansa Fuze using Windows 7 (drag and drop, or Windows Media Player)

  Hello

  Yesterday, I bought the Sansa Fuze and I have problems copying files to the device using either Windows Media Player (Sync) or Drag and Drop (Explorer).

  The symptoms are:

  (1) the device is recognized and available in Windows 7 (Series USB MSC - sorry don't have it with me right now)

  (2) took me to upgrade to the latest firmware, which has worked flawlessly

  (3) when I try to drag and drop a file on the device (I use Windows 7, 64-bit), it starts, but doesn't seem to calculate the size of the files or waiting time to download correctly.  It is followed by a slow progressive, until the computer crashes, resulting in a constant 100% of the CPU.  The only solution is a hard reboot

  (4) when you use Windows WM, the device is recognized, okay and the synchronization starts, but it then stops without reason.  Once again, the processor springs and requires a reboot

  (5) using the results 3 and 4 in 1-5 files being copied across, but not more.

  (6) I tried several albums and one album at a time, but cannot determine if that makes a difference.

  Help, please!

  See you soon,.

  Richard

  It may be a bug in Windows 7. But one thing to try is to go to the Device Manager (assuming that Windows 7 still has), uninstall the "rocket" (under USB controllers), and then run add hardware to find and reinstall the driver.

  Use the MTP with Windows Media Player mode, MSC mode without.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk.

  Windows 7 can't copy files on external hard drive and keep showing "cannot read the source file or disk" HELP me PLS
  I'm going crazy because of this

  Hello

  1. What is the format of the file system on the external hard drive?

  2. are you able to copy or move files into the computer?

  You can follow the suggestions mentioned below and check with the question.

   
   
  Method 1:Delete CCG, prefetch files.
   
  Step 1: Delete Temp files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all Temp files in the Temp folder
   
  Step 2: Delete Prefetch files

  (1) open the window run (Windows key + R)

  (2) type %temp%, and then press ENTER

  (3) delete all files in the Prefetch folder.

  Method 2: Run the tool (SFC.exe) System File Checker, try to copy the files and check.
   
  Follow the form of measures the following link: http://support.microsoft.com/kb/929833
  Method 3: Run the check disk then try to copy the files and check.
  
  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
  Note: If bad sectors are found in the hard drive then it could try to fix this particular sector. If you have any data on that, it can get lost.
   
  See also: http://support.microsoft.com/kb/976972
   
  I hope this helps!

• Occurs when there is a problem accessing a critical file during the download.

  I am tring install yout trial and I get a 204 error message which is occurs when there is a problem accessing a critical file during the download. I have no idea what that means or how to fix it. Can someone help me?  < deleted by the moderator >

  Hi Roberta98974311,

  Try the steps mentioned here troubleshoot Adobe Creative cloud download, install and update questions

  Along with that, well want to go ahead and file empty 'Temp' of your computer and try again as the 204 error occurs when there is a problem accessing a critical file during the download.

  Location of the Temp folder: "C:\Users\"User name "\AppData\Local\Temp"

  AppData is a hidden folder, to access a hidden folder on windows 7 see, Show hidden - files-Windows help

  We invite you to update this discussion in the case where you need help

• Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please

  Hi, I reinstalled vista windows several times on my pc during the past three years, but now he he isaying my activation key is already in use. Can anyone help please

  Use the phone activation, do not meet all the prompts until the opportunity to talk to a real person

• Is it possible to synchronize the copied file in the local folder with the original file in the network?

  Hello

  I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.

  Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?

  Thank you

  Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change.  So, since we cannot just write a program, the best thing is either:

  (1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.

  or

  (2) plan the "my sync files' to run automatically every x minutes.  It could be a batch script that checks to see if the file is more recent and copies only files that have changed.  Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.

  Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.

• BlackBerry smartphone how to copy files from the PC to BB

  How to copy files from the computer to the BlackBerry 9700?  I have a couple of Word and Excel files, I like to keep it with me on the BB.

  Thank you.  I didn't know that I had to hit edit.  I have never when I had my iPaq.

• Media Encoder CC 2015.3 missing files during the export

  Hi guys,.

  After the upgrade to 2015.3, I've noticed on several PP exports to ME that sometimes a video clip will not export.  It will happen every time, lack the same clip or two with a certain sequence, and when I export directly from PP, the clip will be in the final export.  If anyone has experienced this type of problem, and someone at - it other than just export directly from PP solutions?  Thank you.

  Double post, please see the original post here:

  Media Encoder CC 2015.3 missing files during the export

  Thank you

  Ilyes Singh

• write to the file at the end of the program

  I am trying to acquire data of resistance on a DAQmx channel. The data are acquired in a while loop.

  I need the program to keep storing data in a table that develops according to the incoming data and writes all data in a file when the program ends.

  I currently have an array of index with the iteration of the while loop wire its terminal index meter and a 'writing on a file of measure' vi placed outside the while loop. However, when I finish the program, there is no output file.

  What is the best way to do it in Labview 2011? If self-expanding table is not possible, can I pre-allocate a large size and I then it stores data but I'm going to have to again at the exit of all the data only once at the end of the program.

  Rather than build a huge range, using a configuration of producer/consumer .  The idea is to use a second loop that records your data that you acquire.  In this way, you can open the file before the loop, format and write the data to the file inside the loop, and then close the file at the end.  To send data to the loop of logging, use a queue.

  You can also use the DAQmx Configure in Streaming VI say DAQmx to save your data as it is read directly to a PDM file.  Much more effective than anything that you will come up with.

• OPA can produce Excel or XML files at the end of an interview?

  OPA to use BI Publisher to output PDF or PDF/A files at the end of an interview is a piece of cake.  In the Office of BI Publisher there are options for the use of the model output in several different file formats, but I have not seen a way to do it in the OPA.  The new button in the OPA in the Forms tab only generates a RTF.

  The form template is always RTF.  You specify the type of the form file when it is added in the interview:

  

  http://documentation.custhelp.com/EUF/assets/devdocs/february2016/PolicyAutomation/en/default.htm#guides/Policy_Modeling_User_Guide/interviews/screens/Add_forms_to_screens.htm#specify