Windows XP - service 'Security Centre' does not exist.

Similar Questions

• Windows 7 service Security Center does not illuminate without notice was working fine

  tried this forum recommended - lit new automatic operated OK 60 seconds off again and won't run repeated process everything's well 60 seconds later again once I had no update since 11/24/2010 when I try not available very disenchanted to grow with this software service still waiting for microsoft to help with the previous queries-Rawdon

  a. Click Start, click Run, type "services.msc" without the quotes.
  b. when the window appears, scroll down to the bottom and double click on Security Center.
  (c) where it says start, auto value of disabled. Below you will see the word 'Start '. A click on that and then click OK. Restart your computer and your Service Center should be active.

  If the problem persists, perform a SFC scan and check.
  To Perform a Scan SFC -

  a. click Start, click programs, Accessories, right-click on invitesand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  b. type the following command and press ENTER:

  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time

  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue

  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity"

  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

• Failed: Cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  When I try to run the converter that we receive the following error message, FAILED: cannot access the remote Converter Standalone Agent service. It does not exist or is not responding.

  RaymondT

  Given that the conversion works, you can have a software or configuration of Windows Server. Check the Windows event logs. Anything in current policies that could prevent?

• Windows Defender: the specified path does not exist.

  What happens if when I have on windows defender, he said

  C: / Program Files/Windows Defender/MSASCui.exe
  the specified path does not exist.
  Check the path and then try again.

  Hello

  "%ProgramFiles%\Windows Defender\MsAsCui.exe".

  Right click on your icon - properties - Shortcut tab and compare your configuration to the one above.

  This is the equivalent of:

  ' C:\Program Files\Windows Defender\MSASCui.exe "'

  Note the space before the P and the / slashes in your. Rob - bicycle - Mark Twain said it is good.

• Error: "an authentication error has occurred. The security package does not exist", while trying to office remotely on Windows 7

  HI am kouadio.

  Then connect to remote desktop of my PC giving credentials he strikes me an error like

  "An authentication error has occurred. There is no such thing as the security package.

  Please can someone help me and tell me the solution for this.

  Thank you

  Kouadio

  Original title: Remote Desktop error

  Hi Steve,.

  Provide us additional information to help you better with this issue:

  1. You did changes to the operating system before this problem?
  2. Your device is connected on a network domain or a Windows Server?
  3. Exactly how you try to access the remote desktop?

  If your device is connected to a domain network / server Windows, please post your request in the sub forums. We have a dedicated team for help you with this problem.

  Forums TechNet Windows 7

  Otherwise, you can view the Microsoft Help article below and check if it helps.

  Connect to another computer using Remote Desktop connection

  It will be useful. Get back to us with an updated status of the connection to the remote desktop, we will be happy to help you.

  Thank you.

• Windows Server 2003 cannot log on and say: issas.exe (service dirctory file does not exist)

  I want to help me
  I want to recover my operating system

  Hello

  The question you have posted is related to professional level support. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Windows 7 - cannot install system updates - "Windows Update service... does not work."

  original title: Windows 7 - cannot install system updates - "Windows Update cannot currently check for updates, because the service is not running." You may have to restart the computer. "

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: try to get weekly updates applied.  Since the 1845 update I couldn't have Nicrosoft updates applied to my system.  A disable the updates because the system continues to try, and I try again me and try all the time.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dena,

  I solved the problem: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  "FixIt" MS reported that he had fixed everything, and W7 update mechanism works very well- but the problem remains:http://support.microsoft.com/kb/971058

• VMWare Fusion does not charge: '... /.» Trash/Windows XP Home Edition.vmwarevm' does not exist.

  Hello

  Friday, I emptied my Mac desktop trash to get rid of the old emails, etc..  I have never knowingly put anything VMware in the trash.  But now, when I try to load install VMWare Fusion to get to my old Windows XP, I get this error message.  I tried many restorations of Time Machine, without success. Is it possible to get the functionality back to Fusion without losing my old data in it?

  Is it possible to get the functionality back to Fusion without losing my old data in it?

  In case the explanations of Woody is not clear: a .vmwarevm bundle contains all * data related to a virtual machine. If it was in the trash and you drained, you have already lost your data. There is nothing to recover. Sorry to have to be the Messenger of bad news.

  exception of strange situations

• Windows XP the specified domain does not exist or could not be contacted

  I think that as long as XP has been around, Microsoft would have found a solution to this problem.

  Everything I've found don't do me no good, because I can't cross the password prompt. Is normal

  or safe mode.  What am I supposed to do? I can't afford a new computer, so in the meantime I'm without my main

  computer.

  Some relevant information would be useful.

  Thank you

  Larry

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/307545

  It will be useful.

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• Trying to turn on network sharing and discovery, I get the message 'the specified service does not exist as an installed service' I am running AVG internet security 2013

  When I try to change the networking of sharing and discovery, I get the above message.  I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.

  Hello MarkPogue,

  Thank you for the question!

  I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Desktop window manager does not exist in services

  Desktop window manager does not exist in the services, any ideas on how I can activate Aero? I use the German version of Vista Ultimate.

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the fixit from Microsoft Fixit article and if that helps.

  Visual effects Aero Glass in Windows are not working or displayed:

  http://support.Microsoft.com/mats/aero_effects_not_working/

  Method 2:

  Try the steps in the following Microsoft article and check if it helps.

  Solve problems with Windows Aero:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Aero

  And also refer to the following article from Microsoft to activate Aero effects and check if it helps.

  http://support.Microsoft.com/kb/947036

  Hope the information is useful.