Windows XP SP3 problems

Similar Questions

• LifeCam Studio on Windows XP SP3 problem

  LifeCam Studio on Windows XP SP3. Connection camera after installation of the software (driver). Not dedect camera. Error code 28. Massage: "the installation of the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor. "Windows Vista on the same PC works fine.

  Tried all Microsoft directed - no luck.

  Help, please!

  Yuriy

  Hi YuriyBelitskiy,

  1. Did you the latest changes on the computer?
  2. What are the steps you tried to solve the problem?
  3. When was the last time it was working fine?

  See the article and try the steps mentioned, check if it helps.

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

• Windows XP SP3 problem?

  Hello

  We have developed a USB receiver of the material basis for the broadcasting DAB/T-DMB Mobile solution. This application will start receive the stamp of streaming via USB driver chipset.

  Real problem is when we used our command interface in Windows XP service Pack 3 has problems of overflow. (System could not read USB in 12 States delay buffer then overflow will have taken place. For the record, the system configuration is very high).

  If we use Windows XP service Pack 2 do not have overflow problems and the system works without any problem.

  Manufacturer of receiver and USB developer has no idea why this kind of symtom occurred in Service Pack 3?

  Kindly let us know any solution to this problem.

  Muru

  Hello thiyagan,

  Just to tell you it's Vista forums. You should redirect your question in the forums XP here: http://www.microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?dg=microsoft.public.windowsxp.general

  
  Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot access my profile. (Windows XP SP3) Problem apparently because of Windows Installer.

  I can't connect to my profile, apparently because of a problem with Windows Installer.  It starts to open a session and when I try to access my documents I get a message unable to access my profile and if I'm logged a temporary profile: "Details: access to refusedowever, everything seems to be there, except for my usual wallpaper and I can access my files."  In the msconfig Services tab, Windows Installer shows as stopped. I tried to reinstall, but it won't download because of the error of windows install. The keyboard started to do fun things like key assignment got confused. My admin profile works except for the Windows Installer problem which stops remove me or update Java. I checked for malware and viruses (no) run "sfc/scannow" ad "chkdsk /f.  All system restore points are missing.  If I can access my files, the system asks me my first and last name and initials prior to providing access. I have now the temp profile open in safe mode and note that a file that I saved when you previously logged into the temp profile has been saved successfully to the new folder that I created. In addition, when you are connected to normal mode, I found that I couldn't access to Mozilla Firefox, open MS Internet Explorer and click on a link to something (can't remember what) and Mozilla Firefox open as usual.

  Things that I did just before this problem appeared: installed and run Malwarebytes and Superantispyware, tried to update Java and VLM Media Player using AVAST! interface, and then without using AVAST! interface. Both failed, but something else I've updated OK. Tried to download and install Windows Installer 4.5 (without success). So I then tried to repair/reinstall command of the race by using regedit and regserver command screen.

  I wonder whether to follow the instructions in http://support.microsoft.com/kb/322756. However, as it asks me to back up the registry before you edit it. As all my previous restore points disappeared, I don't trust to back up the registry. How can I back up the registry of my external hard drive?

  You have a damaged or corrupted user profile.  A way to recover from this condition is to perform a system restore, but since you have no restore points, you will need to recover with another method.  The usual way to recover is to create a new user profile and then copy the data from the damaged to the new profile user profile.  This procedure is not usually difficult.  Choose from the selection below:

  "How to recover damaged Windows XP user profile"

  <>http://support.Microsoft.com/kb/555473 >

  "How to copy a user profile data damaged to a new stars in Windows XP"

  <>http://support.Microsoft.com/kb/811151 >

  Almost always, corruption of the profiles is accompanied, otherwise caused corruption in the file system.  At an ideal time, it is strongly recommended to perform a 'chkdsk' operation with the "/ R" or "Repair" option.  Note that this operation will take place at the next reboot before Windows loading completely, cannot be interrupted and can take more than a few hours depending on the size/speed of hard disk and the number of errors found...  Sometimes, this in-and-of-itself can solve the problem.

  "How to perform Disk error in Windows XP check"

  <>http://support.Microsoft.com/kb/315265 >

  To answer your question on the backup of your registry - try the freeware "C:\WINDOWS\ERUNT" to create a backup.  It has been used and recommended in this forum for years.

  C:\WINDOWS\ERUNT: <> http://www.larshederer.homepage.t-online.de/erunt/ >

  HTH,

  JW

• Problems on Mac OX 10.6 V.S. Windows XP SP3

  Hi all

  I have a problem with my MacBook Pro.

  My system is Mac OX 10.6, but I use BootCamp to 10.6 to implement the portable Windows XP SP3 on the same computer. Then I put in place LabVIEW 8.5.1 on Windows XP system and use Agilent 823578 USB/GPIB Interfaces to communicate with locking SR830 amplifier.

  When you use Angilent connection Expert, I could communicate with SR830 by Agilent 823578 USB/GPIB Interfaces. However I couldn't use relative visa in LabVIEW command, such as opening VISA, to connect with SR830.

  On the other hand, I use the same program on the DELL Windows PC to communicate with SR830 without any problem.

  So I was wondering is it a problem of compatibility of MacBook Pro and Mac OX 10.6 with Driver of instruments?

  I will be appreciated if someone could help me to solve my problem. Thanks to you all.

  First, you must enable support for Tulip so that MAX recognizes the controller of agilent. In MAX, you select NI-VISA under the software section. Click on the visa, and then under MySystems Options > General settings, select passports. Check the box for NiVisaTulip.dll. If you do a view > refresh, the controller must be included so that you might have to restart. When MAX lists the agilent controller, you should be able to scan for instruments. It's what will update the visaconf.ini file.

  I'll sort of memory on it and have only done on windows pc. I don't really know if there are problems with it under a virtual machine on the Mac. There are numerous links on tips related to the use of controllers of agilent with LabVIEW so you can do a search to see if I missed the details.

• problems of xbox 360 with windows xp sp3 wireless receiver

  problems of xbox 360 with windows xp sp3 wireless receiver

  Hi Frank Lucas.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can see the steps outlined in the article below

  Troubleshooting your Xbox 360 Controller for Windows

  http://support.Microsoft.com/kb/908888

  You can also post your query on Xbox Forum

  http://forums.Xbox.com/

• Performance IEEE 1394 Windows XP SP3 Adobe Premiere 6.0 problem

  I'm trying to capture video using Adobe Premiere 6.0.  When I got Win2K installed it worked fine.  I have upgraded to Windows XP SP3 and first stopped working properly.  A clean installed Matrox RT2500 - it's the video capture card, I bought with the kit Adobe Premiere - according to the instructions, as well as first - including the 6.01 update.  Now when I connect my Sony DCRTRV520 camcorder via firewire IEEE1394 and try to capture the Hi8 video I recorded, it won't record a few frames, then stops.  Matrox video tools say that the IEEE 1394 device has stopped working.  First capture options indicate that the camcorder is not recognized.

  I found a forum which indicated that the problem was with XP sp3 drivers for Texas Instruments OHCI 1394 device - indicating that the sp2 and sp3 downgraded the 1394 to S100 speed device performance.  I found an article in the database saying MS was aware of the problem and finally got that to work (KB885222) download

  http://download.Microsoft.com/download/9/0/6/906f2f67-39c4-48bc-8558-86833d4cbc16/WindowsXP-KB885222-v2-x86-enu.exe

  It will not actually install on the PC I am running SP3 not SP2.  It's really frustrating because the system worked very well under windows 2000. Even worse since I have a lot of old video - not stored on DVD or transformed into films which I was hoping to work for presents for the family, this Christmas.

  Anyone know of another - hotfix - download or similar which will fix this problem?

  Hi John,.

  Thanks for posting in the Microsoft Community Forums. I suggest you post this question in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Error message "the website has encountered a problem and cannot display the page" when you try to install Windows XP SP3 update

  Original title: cannot use Windows Update to install Windows XP SP3

  I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2.  However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page.  I tried all the suggested fixes that I can find.

  During the last attempt, I discovered that several dll is missing.  Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll.  If they are critical, where can I find them, and how do I get support.

  In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point.  Is this critical?

  In any case, I still can I install Microsoft Update or download/install SP3.

  The computer is an IBM R50e laptop.

  Thanks for any help you can give.

  Try to run this tool to windows update. This will help to re-register the dll

  After its done. try again and do the update

  hope this helps

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error?

  I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error? This is the summary of errors:

  AppName: explorer.exe AppVer: 6.0.2900.5512

  > ModName: ModVer shellext.dll: 4.0.468.0 Offset: 0000ca 93
  Please help thanks :D

  This problem is likely to make for an extension of the shell badly installed on your machine.  The way to solve this problem is to download and install the free software "ShellExView".  When you run this program, it displays all shell extensions that are installed on your machine with a checkbox next to it.  By unchecking the box, you can disable this particular shell extension.  By trial and error, you can find the one that is causing your problem.  Once you find it, the solution is usually apparent (usually UN-installing and re - install an application associated with this file extension).

  ShellExView: <> http://download.cnet.com/ShellExView/3000-2094_4-145729.html >

  HTH,
  JW

• HP Officejet software 4620e Windows XP SP3 and the base driver installation problems

  I am running Windows XP SP3 and installed the software the printer HP Oficejet 4620e and, when it is finished installing, all I see are two pages of text of the code.  In addition, the printing software disables my wireless network connection and I need to fix the adapter wireless network at regular intervals.  I uninstalled the printer software and installed 4620e HP basic driver software that HP offers as an alternative for computers that cannot use the full package.  I get the same results with the HP basic driver package 4620e as with the complete software package (two screens of text of the code).

  Please help.

  _________________________________________________________
  JOHN

  The reason why the pages are open as code is because something has changed to the association of files of these types of files.  The discussion below describes the problem on a 6520 and offers a solution for it.  Try this patch and let me know what happens.

  HP Photosmart 6520 "printer assistant" will not work

  The problem with the printer lock up your computer is caused by ink alerts defined as always, and because the analysis of the functionality of the computer is turned on.  The document below will guide you through fixing the problem.  Let me know what happens.

  Printer loses the network connection in Windows XP after the computer is turned on for four to 12 hours

• Windows XP SP3 Pro problems

  1 SP3 adds 30 seconds of my boot time
  2. There is NOW 4-5 new files in C:\WINDOWS
  3. I see no need for SP3
  4. I'm not buying more Windows operating system until you have fixed SP3.
  5. what you do with SP3 are illegal.

  I see no need for SP3...

  Support for WinXP SP2 ends July 13, 2010 (x 86) extended. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  What does mean if my version of Windows is no longer supported? :
  http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean

  See also...

  Cleaning after installing Windows XP SP3
  http://aumha.NET/viewtopic.php?f=62&t=33827

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Laptop DV1000 with the new Windows XP SP3 and the problem with drivers

  Hello

  I formatted my DV1000 Pavailion laptop and installed Windows XP SP3

  and here is a screenshot of the missing drivers I

  

  all I want is a detailed itinerary on how to install the missing drivers, so I can save this procedure step by step for future use, if I re-formated my laptop

  Thanks in advance

  Hello:

  The first thing you need to do to get the correct drivers is to know the exact model of your dv100.

  Please enter the product number in the box on the link below to get the right page support and driver for your model specific dv1000.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&DLC=en&cc=us

  Many products are on the label as well as the serial number.

• Satellite A100 WIndows XP SP3 - Corrupted registry?

  Toshiba Satellite A100 WIndows XP SP3.

  A few days ago I noticed that windows update has stopped working and I had network problems. New research has shown that the BITS service did not start and other services such as DCOM did not begin. Fix - It of MS failed with the error code 7255. I tracked the issue to a possible Trojan horse as the registry keys had been renamed % fystemroot %. I've edited the keys to any %, according to online tips and delivered to market successfully. This has not fixed the BITS issue but more googling suggested that I needed a parameters key that included the Systemdll=%systemroot%\windows32\qmgr.dll value in the BIT key in HKLM system.

  I added this, but now when machine re boots I get a partial screen, no task bar, I can perform certain tasks by CTRL-ALT-DEL and the functioning of the Task Manager. I tried to cancel the changes by running regedit, but it does not work. None of the user accounts, even in the CMD has access to most of the services or the directories.

  I have the Toshiba repair disk but it seems to want to do a complete re-install XP, while I have backups, it would be my last option because I still have to lose data.

  MS KB307545 says not to use on install OEM (I have a full version of XP SP2 I could boot from it) http://support.microsoft.com/kb/307545 but did not say what you need to do.

  By pressing F8 during does not start safe mode and I can not find a mechanism beginning a system restore. I should have one from last Tuesday.

  Anyone has any ideas.

  Hello

  See this Microsoft Knowledge base article:

  + How to start the System Restore tool by using the option of safe mode with the command prompt in Windows XP +.
  http://support.Microsoft.com/kb/304449/

  If you have an original Win XP disk then you could start using this disc. The installation of Win XP supports a repair option that start you press the R key (when windows asks to press R).

  Otherwise I put t see any other option as to reinstall new OS

• my Windows XP sp3 laptop completely stops working (tight) when plugin - container.exe is running. If I stop using the Task Manager, everything works again. Please advise as my addons arnt work not at all?

  Windows XP sp3 on a dell inspiron 1000 laptop siezes place completely after the launch of firefox 5.0.
  Ive always had the same configuration and update of firefox I'll.

  The "silver bullet" is to disable out-of-process-plugins, that could cause Firefox to crash instead of only the process that causes a problem.

  http://KB.mozillazine.org/plugin-container_and_out-of-process_plugins#Disabling_crash_protection