Windows10

Similar Questions

• IX2-disk to read directly from Windows10

  Hello

  Is someone can you please tell me how I can read a disc of my IX2 Windows10 form?

  I connected the drive without going through my IX2 while I can't reach him more and the first disc is damaged. So I want to connect the second drive directly to my pc Windows 10 and copy the data to another disc.

  Thanks in advance,

  Mark

  Hello MarkHerman,

  You can use something like UFS Explorer to achieve:
  https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=UFS+Explorer

• 6700 premium e - All - In - One: Scan doesn't really work in Windows10

  Hello, I upgraded my new laptop (comes with Windows8.1) immediately to Windows10 until I installed all the software, drivers etc... So no old drivers should be there. I checked the WIA Service (enabled), turned off the firewall for a short trial period. Nothing works. Anyway if I leave a scan of the laptop or HP Officejet, where the name of the laptops. It starts - it looks like it would work - and then nothing happens. No error message or more.

  WEBSCAN overboard ews works very well. Run printing HP and scan doctor - message: "Windows (WIA) Scan-Fehler, Der Scanvorgang wurde vom Benutzer abgebrochen." But I have nothing.

  Problem solved . Anti-virus protection of the browser was to blame. Exceptions for printer IP added. Digitization of works still wonderfully. Thanks to Maik_N

• If we improve windows10? photos and personal data will not be deleted na?

  If we improve windows10? photos and personal data will not be deleted na?

  Nope.As windows 10 is an upgrade, the installer must keep everything.

  Make sure that you back up the data before the upgrade to avoid screwing

• upgrade w7 windows10 - 8004000 8020000 error code

  Original title: Mr.Meyer

  When the download and upgrade w7 windows10 it fails permanently 8004000 8020000 error code

  Try to upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Download windows10 go 7 for free but its summer in the research or undates

  Download windows10 go 7 for free but its summer in the research or undates last 8 hours is it true?

  Microsoft recently released updates for Windows 7 and Windows 8.1 improve the stability of the upgrade for Windows 10. Please ensure that you have the update to your respective version of Windows:

  KB3112343 for Windows 7 et KB3112336 for Windows 8.1

  then

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  then

  then

• Please wake me up from this NIGHTMARE! -> Dating back to windows10 windows8 after refresh

  Hello

  I had to update my Samsung laptop unfortunately after using Windows for a short period 10.

  He didn't wake up from sleep and after the hard reset, will not start normally again, he brought me to the auto repair page where, finally, I had to update my PC.

  So now I'm on new windows8 and want to come back to Windows 10 (well, I do not know why, because it was causing issues on the first place, but I thought after a refresh own it might be better)

  So now the nightmare begins! I didn't expect from Windows 10 would be such a pain!

  So, I can't update to Windows 10 directly from windows8 (why MS, WHY?)

  So I have to go through the nightmare of upgrade to windows8.1, BUT I'm already doing it for 3 days without success.

  Automatic updates makes me very very very hard, cold all the time during the download, analysis, installation, no matter what.

  Finally I somehow got to the point where I have the win8.1 app in the store, but when I try to install, I get:

  "Something has happened and cannot complete the installation of Windows 8.1.

  previously, he even begins to download. I tried to follow the steps here: http://blogs.technet.com/b/ouc1too/archive/2013/10/25/something-happened-in-the-install-of-windows-8-1-can-t-be-completed-and-now-you-re-annoyed.aspx

  but it still does not work!

  and I can't complete installation of all pending updates because it fails all the time...

  I just want to go back to Windows 10 but even can go to wind8.1.

  I though he would go smooth after the update, but it's a NIGHTMARE!

  Is there a way to circumvent this terrible thing and go directly to Windows 10?

  MS, how is, you have built such a ugly update mechanism? Since I have my laptop with windows8 pre-installed I have problems and questions and I am even not use strongly. You really do a very good job in convincing people to switch to Mac.

  Please help me :(

  If your installation of win 10 previous was activated I mind not even implemented to date but rather to do a clean install of ISO.  You can get them below.

  The fastest way to get the upgrade is to download the ISO.  Year ISO is like a dvd in order to to use, you need to right click > go up.  Begin upgrading Windows.
  
  
  WARNING: do not USE NOT THESE TO DO A CLEAN the INSTALLATION (before after you have already updated).  If you do you will not be able to activate it without having previously upgraded to win 10 and active.  Then, you will be forced to reinstall your previous operating system before the upgrade to win 10
  Running the tool of creation of media warning can prevent you to roll back to a previous operating system

  The official download Final Windows 10 is now available Use the download tool to create ISO support to update your windows. http://www.Microsoft.com/en-us/software-download/Windows10 Use tool download now (32-bit version) http://go.Microsoft.com/fwlink/?LinkId=616935 Use tool download now (64-bit version) http://go.Microsoft.com/fwlink/?LinkId=616936

• My LR6 in Windows10 was arrested following a software without correct closure error. When the reopening, LR6 gives the message "your catalog is always opened by another program. Please close this program "." But no other program is open. How early to solv

  My LR6 in Windows10 was arrested following a software without correct closure error. When the reopening, LR6 gives the message "your catalog is always opened by another program. Please close this program "." But no other program is open. How early to solve this problem?

  There is a file with a name ending in. BLOCK in the same folder as your catalog Lightroom.

  Remove this item. LOCK file. Do not remove anything else.

• Seit der Windows10 Installation nicht mehr die Aktivierung von Photoshop CS3 works

  Seit der Windows10 Installation time Photoshop CS3 Aktivierung lightning eine. Die Aktivierung ubers Internet works nicht. Die ursprungliche Aktivierung first stattgefunden hat. Wie kann ich wieder aktivieren PHotoshop.

  Please see Learn how to enable or disable Adobe apps.

  In the case of questions, we can consult the Activation and the deactivation of troubleshooting

  Hope this will help you.

  Kind regards

  Hervé Khare

• Refresh after Windows10 resembles the old Firefox; all pages in FF look 'safe mode' and other issues.

  Hello

  I recently downloaded Windows 10 and noticed FF goes really slowly. So in some way I have refreshed it. I knew that this would erase some bits of data, but now I am unable to restore things.

  It looks like an earlier version. When I go to any page FF, everything appears in a list. I can't choose a new theme, for example, b/c the Mozilla page cannot display graphics. In addition, I'm typing this in Chrome b/c there is no text box when I open this page in FF. I don't want to go back to Chrome.

  Thank you!

  Thank you, in this case, please turn off https scanning in avast, as it is known to cause various problems:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/

• Improved connected IPad Windows10 private WiFi network w/AirPrint printer. Bluetooth is disabled. Try to print an e-mail, the IPad can't see printer. Android phone works wirelessly with the printer.

  IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.

  Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.

  You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.

• Laptop 15-AC121DX: touchscreen works do not under Windows10

  Got this new laptop yesterday, and everything works fine apart from the touch screen, is not running when started under win10, was phone with 2 hours support, did all the tests, the display works, but finally started it does not work, has managed to find the latest drivers on the egalaxtouch site, still does not work tried later MS MS catalogue, I guess I have to wait for a update or bring her back? like the pc, fast, pleasant and 6 GB 1 TB for 399, but no touchscreen, not a matter of circuit breaker but would be nice if it works properly... and support site when I choose my model it is stuck in a loop constantly ask for the model number...

  Paul

  Try to remove grey pilots and EGalax driver, reboot and see which installs Windows 10. Should not install a non-compliant driver.

• Tecra R850-117 no WiFi after update Windows10

  I tried to update windows 10 TECRA R850-117.
  After update wifi is not found. Had to goback to win7

  Any suggestions what could be done for successful update to win10 with working wifi

  There is probably a WLan driver problem.
  I think you should check if the wireless card is properly recognized in device-> network cards Manager.

  In addition its recommended to uninstall the WLan driver in Device Manager and restart the laptop. Usually Win 10 is expected to begin the search for compatible driver... If this is not the case, you can manually search driver update (also in Device Manager)

  Of course, the laptop must be connected to the internet using LAN

• Workstation HP Z620: Z620 controller SAS Windows10

  I just updated my OS to Win7 Pro Win10 Pro.

  I checked the equipment in System Info and I saw that the SAS has nomore controller a good pilot installed to work.

  In the support page, I have not found a new version of the SAS for Win10 drivers...

  How can I solve the problem?

  This is the driver missing a big problem?

  Thank you in advance.

  You are the very welcome.

  I have compressed upwards and attached to this ID SAS controller driver to the bottom of this answer...

  You need to install it manually.

  Download and uncompress the file in its folder.  Don't do anything with the files in the folder.

  Go to Device Manager and click on the SAS controller requiring driver.

  Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and the driver should install.

  Restart the PC.

  This is the driver I got the file from your PC support and driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5225039 & swItemId = wk_151465_1 & swEnvOid = 4158 #tab1

  Here's a partial copy and paste hardware ID's taken in charge by this driver.

  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D60 & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D61 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D62 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D63 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D64 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D65 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D66 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D67 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D68 & CC_0107%
  % Intel_SAS_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D69 & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D6A & CC_0107%
  % Intel_SATA_RAID. DESC = Intel_SCU_iaStorS_Inst, PCI VEN_8086 & DEV_1D6B & CC_0107%

• Pavilion 2 x 10-KO01NR: Windows10 made get well with flag X 2 10 - KO10NR?

  Windows 10 is very charming to me, but I doubt that my machine much faster.

  I think install Windows 10 in Pavilion X 2-KO10NR is wrong.

  Has anyone satisfied with the result after installing?

  Hello Gene,

  If you talk about slow start-up speeds, here's an article that might help. Looks like this is a common problem with Windows through a variety of computers.

• Stream 7-5709: camera stopped working on stream 7-5709 with windows10

  my camera will not activate.  It goes back to the office.  It worked well upward until a week ago

  Hi, you could try reinstalling the chipset driver pack from the hp.com website.