Workstation HP Z620: Z620 controller SAS Windows10

Similar Questions

• HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

  Hello
  
  I have a HP Z620 workstation.

  My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

  I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

  I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)
  
  My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)
  
  Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

  With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

  My problem:

  1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

  2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

  3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

  4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

  Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

  Thanks in advance for your time.

  MR. J.

  Juggerknight,

  Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

  In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

• Workstation HP Z620 dual xeon: really only 1 6-pin power connector on the graphics card?

  Hello

  I have a question about the HP Z620 workstation.

  recently bought a dual xeon with 960 GTX installed on the 6-pin connector.

  as I can't find any other power to use nor on the power connector

  or nowhere on the set, I wonder how a graphics card must be powered only

  needs

  1 x 8-pin

  or

  1 x 8-pin + 6 pins

  or

  2 x 8 pin?

  I know there are some discussions about this in this forum, but I did not understand

  the solution. Some said there are adapters to go 6-pin to 8 pin (or 6pin to 2x8pin)?

  But how is that possible?

  like many, I know, 75 watts are max of the pci-e connection, 75 other watts Max for 1x6pin.

  so plug any adapter, 1x6pin for graphics cards that need much more power would be

  According to the standard / danger, right?

  and what about graphical installation double?

  would be happy if someone around could help me with this.

  best regards

  Chris

  The search box on this page by default search only this forum, and it is very convenient.  If you type "extra", you will find a lot of info.

  The Z620 has two of these 6-pin cable, and HP got creative and molded into two empty containers down to the black plastic fan holder before.  So, one is being used by you and the second is sitting there plugged and similar, it is used, but it is stored just it did nothing... the fan is powered differently.

  These extra HP 6 - pin PCIe power cables are not standard ATX... they are better.  The ATX standard is 75 watts can go up to the card out of the slot, and another 75 watts can come via the additional 6-pin cable.  HP 6-pin cable can do a bit more.

  This is the message that you want to read, and there there details that were not in any of the HP manuals that I searched through, but the answer was on the label of Z620 power supply.  12V 18A each, plus adding info on some special HP adapters that allow you to take a HP 6-pin and divided to two 6-pin connectors or cable HP 6-pin connector 8 pins.  Watch here.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091#M12740

• HP Z620: Problem of auxiliary graphic workstation HP Z620 pci-e power connectors

  I want to fit my new GPU Z620 workstation card. I see that there are two auxiliary pci - e power connectors on the plastic support. I intend to use these two to put my new graphics card but I see potential problems.
  The problem is that in these two connectors pinout is not really to PCI-e spec. There are five female terminals to each 6 connector routes. The three terminals in the top row are crushed and two terminals downstairs is 12V. 6 cavity is empty in both connectors. As far as I know the PCI-e power connectors should have 12V power supplied to cavity n ° 4 and n ° 6 of cavity. What I have to manually change these two connectors pinout and move terminal 12V from cavity to cavity no.6 no.5 or there may be a few HP adapter that could solve this problem?

  connectors

  

  Only HP knows what HP has designed (and why) and as such, it cannot be assumed simply that a connector on a system is consistent with the 'standards' and not a "psudo owner" Connector (as seems to be the case with your PEG connector that is missing pin #3).

  Normally, a PEG 2 connector x 3 can provide 75W and as such, each 12V pin provides 1/3 of the power budget. This means that the HP "psydo owner" PEG connector, for lack of a better term, may not be able to supply 50W (if each ping is kept for the same current capabilities used in the standard 2 x 3 plug PEG).

  Then, this suggests the Z620 can only support a 175W graphics cards (with 75W of PCIe + 50W of each of the two 2 x 3 PEG connectors). Note that the standard allows graphics cards to 225W pulling 75W of the slot PCIe and 75W of each PEG 2 connector x 3!

  Thus, quantify this is to watch the quickspec for your Z620 and see what graphics cards are certified for use with your system. Then to know what cards are certified for your system, you can check what PEG connectors as appropriate are provided on these certified cards and also check what is their energy consumption. I would guess that all graphics cards that require more juice 175W has not been certified by HP...

  Since you say your card draws 165W, this budget of power seems OK during examination of the foregoing. So it should just be a matter of connect the two connectors of the PEG 2 x 3 and all should be well.

  However, it you want a card more powerful, purely based on the fact that a standard 2 x 4 connector PEG can power 150W using three-pin 12V, this would indicate that each pin can supply 50W. Assuming that the pins used in a conector of PEG 2 x 3 and 2 x 4 are the same, a 2 x 3 with only two pins 12V power connector could in theory provide 100W each. So you could in theory use a 275W card into the PCIe slot with your 2 psudo owner HP PEG connectors. BUT it means something to the pins themselves and that your HP power is up to the task (and can actually provide the necessary 275W power).

  And I would say that if you wanted a graphics 225W which is supported by standards, likley it would be a simple mod to the rider 12V among the pins for the vacancy that is normally used by the 3 pin (12V).  I'd be surprised if the block POWER HP of power and wiring could not handle the necessary extra 50W. But maybe it's a little too much for some who enjoy the guarantee.

  In any case, without owning a Z620, I would be comfortable in saying that you have no problem with this graphics card 165W and these exclusive hybrid psudo 2 x 3 PEG connectors as is

  (Heck, I don't got no problem with a 35W graphics card in a slot PCIe capable of 25W of my Dell T610 server that only supports the graphs via the inetgrated adapter)...

  But really, who knows why only two used HP pin 12V in their PEG connectors, maybe they used the best quality PINE and they were not sufficient for the cards, they chose to certify. Maybe save 2 cents for a less pin was a driving force... HP only knows what HP...

• Connect the hard drive SATA HP workstation xw6200 - 2nd / SATA controller card

  I run this system:

  Manufacturer: Hewlett-Packard
  Model: hp workstation xw6200
  Model number: DU937AV
  Categories: Computer....................
  Hitachi HUA721010KLA330 (1.0 TB) 3 1/2 "7200 RPM SATA 3.0 GB/s
  Sony Optiarc DVD RW AD-unit 7200 s ATA Device
  OS version: Microsoft Windows 7 Professional, Service Pack 1, 64-bit
  Processor: Intel Xeon processor 3.60 GHz, Intel64 Family 15 Model 4 Stepping 1
  Number of processors: 2
  RAM: Mb 8191
  Graphics card: ATI Radeon HD 5400 Series, 1024 Mb
  Hard disks: C: Total - Mo 953768, Free - Mo 911783;
  Motherboard: Hewlett-Packard, 08B8h

  Installing a 2nd HDD I have to install a SATA, two slots used SATA controller card. I would like to know which card to choose.

  I have 4 ports PCI available (#26) and 1 PCI Express x 8 first (#25) available. The two PCI and
  

  PCI Express SATA controller cards are available. Who would you recommend?

  Thank you for your help.
  

  Boyar

   

   

  All we hear is an opinion, not a fact.
  All we see is a point of view, not the truth.
  [Marcus Aurelius]
  

  I'd rather than PCIe PCI for this purpose.

  HP liked SIIG for a number of their SATA PCI slot cards.  SIIG has updaters for these maps on its web site, and the pilots understand place in Windows 8.  Here's what I recommend if you want to only two new SATA internal ports:

  http://h30094.www3.HP.com/product.aspx?SKU=3062195&mfg_part=SC-SAT212-S4&pagemode=CA

  There is also a card HP SIIG eSATA that HP has used, and I have also used that... it worked great.  It has two eSATA ports and no port SATA internal:

  http://h30094.www3.HP.com/product.aspx?cache=2012565552&culture=en-us&SKU=2850719

  In addition, you can connect a single SATA hard drive on an eSATA port (the reader would need external power supply) for formatting, etc.  For that you need a cable with eSATA on one end and a connector type SATA internal regular on others... it is so much easier than to open the box and play with the internal cables.  The best quality I've found for those who are Macgurus.com or Granitedigital.com.  Opt for a shorter (1 m) rather than a longer therefor version if you choose to do so, in order to reduce the risk of interference (which I have never seen this):

  Macgurus told them are indicated for the generation SATA I, II and III, and they are a little cheaper for a length of 1 m of the granite.  Both are excellent companies.

  Finally, there is a HP SIIG PCI with combined eSATA/SATA, with a player external eSATA and SATA port internal:

  http://h30094.www3.HP.com/product.aspx?SKU=2850718&mfg_part=SC-SA1012-S1&pagemode=CA

  I'd stick with HP SIIG solutions and probably buy directly from HP for this unless you can find the same for much less expensive on eBay.  The cards have had several revisions, and I think that if you get your HP, you would later.

• Request preventivo controller SAS 6i/r [MS]

  Buongiorno,

  avrei need di UN preventivo by the controller of the United Nations SAS 6i/r by server PowerEdge 1950 con UN S/T: .

  No line intervento da parte di a tecnico.

  Grazie e buona day.

  Maurizio

  Buonasera,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione (intervento o):
  1 nome società (o codice client):
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società (is it client code):
  Address 2:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• Dell PowerEdge 1950 fuori co - sostituzione controller SAS [MS]

  Buongiorno,

  We have a problema con uno dei nostri Server PowerEdge 1950 (anno 2006): I brain rigidi are non più riconosciuti e sospettiamo che tratti del RAID SAS controller if. Vorremmo ask UN preventivo by a componente sostitutivo is possibile.

  Want cortesemente in pre-empted.

  Speaking saluti,

  Mario P.

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  - Service tag del Server

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge 860 controller SAS [MS]

  Salve,

  HO a PowerEdge 860 to 10 anni ormai di server.

  ORA funziona più non, non riuscendo a caricare it SB

  Andando ad analizzare he problema nelle schermate went departure della macchina machine error: PCIe training error slot n.2

  Andando an all'interno vedere della macchina lo 2 e occupied dal del tipo UCS-51 SAS controller slot.

  Andando a try another seeing it controller knew a slot (it n.1) he di riporta ora error message: PCIe training error location n.1

  Da questo Può avere una enough tell che if he problema sia it controller stesso.

  Problema viene ora di it come our controller of it, che in Italia non seems easy find.

  Grazie,

  Emanuele

  Salve,

  processato ordine: th di Ricevimento Ordine: customer 292356315: 2907508 - ARCHIMEDES LOGICA SRL N ° di Re: 15439131

  Speaking saluti

  Manual

• Installation failed on SuperMicro H8DA3-2 (Controller SAS LSI 1068E)

  Try to get VMWare ESXi installed on a SuperMicro H8DA3-2 (http://www.supermicro.com/Aplus/motherboard/Opteron2000/MCP55/H8DA3-2.cfm). It uses the LSI 1068E SAS controller, which is considered to be supported in the guide to the i/o Compatibility Guide for ESX Server 3.5 and ESX Server 3i. However, I get the error "Cannot find a device to install to", just after the acceptance of the license.

  Try to manually load the mtp_scsi_2xx.0 module also fails.

  I tried with no RAID, all drives in a RAID0 configuration and two readers logics, (RAID1 and RAID0).

  Any tips?

  Graham:

  The LSI firmware update provided by Supermicro put the controller in target/initiator mode which means basically no RAID.  I am not too happy that the RAID is not supported by VMware on this controller.  I wish they would put notes to this effect in the HCL.

  in any case, contact Supermicro support and they can get you the update of the Firmware of the LSI for TI mode which should then work.

  Kind regards

  Bill

• Replacement of a controller SAS 6/iR with an H700 on a R310

  I have a PowerEdge R310 with a SAS 6/iR controller. I want to have a H700 controller on the server.

  Dell sent me a card H700 with what I suppose is the cache of 512 MB NVRAM memory attached. But they also sent me a battery.

  

  

  The longer wire looks like it plugs into the controller, then the battery or the RAM module. Can I use this battery at all?

  I've seen pictures of this farm where she has a few weapons plastic attached to it. This would allow the battery to fix on the controller. I don't have these weapons.

  The red and black wire more short looks like it plugs into the controller and a spot on the motherboard labeled HD_ACT_CARD. Is this correct?

  Should I remove the SAS6/iR controller? I think that the SAS6/iR controller is this one with the blue plastic:

  

  The instructions provided with the H700 tell you almost anything. Is there another manual or reference a guide to what should I do?

  Thank you!

  Yes, you will need the battery to use the cache.  Without cache, you will have wasted your money on the H700.

  The H700 will have to go to the x 8 PCIe slot on a tube of length 2.

  If you do not see the readers through the new H700, there will also need you a cable to go from the backplane to the controller (8087)... the documentation is not very clear, but it seems that there is a connector on the motherboard next to SAS 6/iR PCIe slot linking readers, who probably does not work if you are using the H700 , so it would need its own cable.

• How to clear a 'foreign' status of a disk replacement on a perc controller sas 5 / i

  Our controller perc 5 / i with a raid 1 in a PE2900 configuration had a virtual drive "degraded".  The dell server administrator a reader was a State of 'foreign'  Not sure if the drive was bad or not, we got a replacement used, hot-swapped drive it and it also has a State of 'foreign'  How can I clear the foreign State and have it rebuild the raid 1?  I was in the server admin but you have found where I can delete the foreign State of the drive or the raid rebuilds.  Any help would be appreciated or maybe a link to the perc controller 5 / i manual that describes how to clear a foreign State.  Or I need to contact dell support?

  VD MGMT screen, highlight the controller, F2, foreign, clear.

• Dell Precision 5400 - Problema aggiornamento firmware RAID LSI Logic for Dell SAS 6 iR controller

  Assistenza Tecnica Dell company,

  only recently ho avuto disco SAS Seagate Cheetah 15 K, pertanto it SAS controller mi segnalava che degradazione of the proclamation of the United Nations of the UN problema del Volume sul quale era misconfigured it suddetto disco.

  Ho labor-intensive UN uguale disco, stessa marca e modello e versione firmware (S527) di quello nel present RAID 1, recoupling the configurazione del nuovo volume non e consentita, perched there controller individua it firmware del nuovo disco como S52A instead S527, come scritto anche nella targhetta present sul disco stesso.

  Conseguentemente, pensando che if trattasse di one problema al legato firmware led controller (SAS 1068E FW 0.20.48 - IR) sono stato web sulla pagina Dell, del supporto relativo al oggetto Office (serial number: ), ho aggiornamento di downloaded it pilot, my film camera durante he message:

  SASDupie.exe-> ' Impossibile find it punto di ingresso RegDeleteKeyExA della procedure nella libreria di special dinamico ADVAPI32.dll.

  A seguito di this error the TR sommergibili interrupted e quindó non e possibile procedere con controller aggiornamento del firmware del.

  In attesa di una risposta in merito, Corinne occasione per porgere Web saluti.

  Antonio Morrocchesi

  Buongiorno,

  questo forum e exclusively by server and sistemi per ricevere assistenza by it is reported (Precision Workstation) is University 02 57782690 lo.

  Speaking saluti

  Manual

• SAS on RD450

  I have a 70DC RD450 (disks 3.5 ") type, which has the SATA AnyRAID110i controller integrated with marked cables 'SATA' at the bottom of the basket in the car.

  My question is can I buy just the controller SAS RAID500 and install it and then plug the SAS is the bottom of rack SATA only or existing records on the backplane?

  Thank you!

  Hello

  Great question! You CAN buy a SAS controller, and then insert the SAS drives if you wish. Backplane should work with either.

• E PowerEdge T300 PERC 6I controller

  Salve,

  all'accensione del Server (service tag ADMIN NOTE: maintain the label removed by privacy policy >) ricevo message failure e di UN ho noticed che he controller SAS PERC 6I integrated non viene visto dal sistema, quindi non vede even i controller 2 brain collegati al.

  M'immagino sia da auswechseln... part quale devo would number? E' sufficiente hope he controller o devo take intervento di UN tecnico Dell?

  Grazie

  Buongiorno,

  by procedere alla riparazione del server can farvi due tipi di preventivo:

  1 Sostituzione della parte con UN tecnico onsite

  2 per e restituzione della sola parte guasta.

  A quale option e interested?

  Nel caso could inviarmi in privato it contact by l'eventuale e intervento the address.

  Grazie

  Marco

• Areca Arc - 1210 SATA vs SATA-SAS/Arc-1212 he's he's

  Hello

  I was thinking to get a map of a Arc-1210 for Internal RAID 3 with my samsung F3 1TBSATA he's 4. during the

  my research on the places where to buy the map, I found the CRA-1212 with the best speed of buses and support he's SAS/SATA

  devices for only a few dollars more. So I thought I'd get the 1212.

  I contacted Areca to check the usability of my samsung F3 with the map of the Arc-1212. They answered me:

  the 1210 and 1212 are 3Gbp controllers, an important difference between
  1210 and 1212 is the 1210 is a SATA controller and the 1212 is a SAS
  controller.
  controller SAS 1212 use most recent processor than 1210 used, more quickly and more
  flow rates, so you can got higher on 1212 performance if your readers have
  higher rates 1210 can manage.

  but because the 1212 is a SAS controller, which means that it can not completely
  compatible with SATA drives as did the SATA controllers. and the car you
  used are at records office which can not enough reliable for the purposes of the table.
  I can't say you use 1212 with these disks is a good configuration or
  not.

  This response from Areca, I don't always get no clear answer if it will work. I found a lot of information for

  the arc-1210 on this forum and it seems to be a good purchase but mostly nothing on the 1212.

  Did someone have a successful professional with the Arc 1212 F3 by car or with another sata drive? or knows where I

  Find the answer?

  1210

  http://www.areca.com.tw/products/PCIe.htm

  1212

  http://www.areca.com.tw/products/pcietosas01.htm

  First of all, based on the experiences of many people here, the F3 are perfectly OK in a raid array. Even from my F1 of slow and old job without a hiccup.

  Second, if you have the choice to get a 1680 or even an 1880 map, you can enjoy many many IOP fastest and fastest cache. I'm not quite familiar with the range of 1200 to say it is better the 1210 or 1212.