WindowsServer 2012, core ID error 41

Similar Questions

• 2710 XPS (mid-2012) Core i7: upgrade to Windows 10 Professional

  Hello

  I wonder if anyone with XPS 2710 (mid-2012) Core i7 has successfully upgraded to Windows 10 professional?

  If so, it would be useful to know how long the Windows 10 Professional upgrade works and if the hits include a clean install.

  Would appreciate any further feedback/suggestion on the upgrade of this model.

  Thank you.

  As far as I KNOW, anyone who could save a 2710 XP from Win 10 black screen of death, returned to their old version of Windows. So even if they were able to recover, they don't run win 10.

  If you need to win 10, you can sell this PC with Win 8.1 and not risk trying to upgrade. You get at least a few $$ out of a nice working system.  If you upgrade to Win 10 and it fails...

• Windows 7 Ultimate core 41 error message/absence of download INet.framework 4

  Windows 7 ultimate core 41 error message/when my computer shuts down now after the error message will not appear my startup journal (black intro screen) and pressing F1 or F8 to enter is prevented. I had my tech look at the computer, and he said it's very good. I bought and built my computer to write the music and it's a nightmare w/all the fracas. I even went to fix and debug kernel41 for Dummies and has not worked. I downloaded. NET.framework4 and it would not install, and still less the debugging tool which he rejected. I am computer savvy, but I'm certainly not a tech and a lot of this is incomprehensible. Cannot not Microsoft we repay or even come w/a fix? I spent a lot of money on windows 7 ultimate and it is absolutely ridiculous. If anyone can lend an ear or provide a plausible solution, I would be really grateful.

  Hi Levicka,

  The kernel power event 41 ID error occurs when the computer is off or it restarts unexpectedly. Starting a computer that is running Windows, a check is made to determine if the computer has been properly closed. If the computer was not closed properly, a kernel Power event 41 message is generated.

  A 41 event is used to signal that something unexpected has happened that prevent Windows to close properly. There may not be enough information to define explicitly what happened. To determine what can happen and to identify a possible resolution, it is important to know what made the computer at the right time before the event occurred.

  Click on the link below and see if it works.

  http://support.Microsoft.com/kb/2028504

  Good day!

  Answer please if you face concerns.

• 2012 R2 server error 0 x 00000139

  Receive error message 0 x 00000139 on my Server R2 2012. I visited the Site of Support of MS which manages the resolution of this error; However, when I downloaded the fix and tried to install it, the system kicks back an error saying that "this update is not applicable to your system." or other similar term. The server crashes every 10-15 minutes.

  I have the OS installed on a HP DL380p Gen8 system.

  FYI, the system cannot be connected to the internet, so you can not remote inside. Any help is appreciated and welcomed.

  Trolls will be eaten for breakfast.

  Any ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Installation of QuickBooks 2012 gives the error "set.up.exe has encountered a problem and needs to close."

  I try to install new software Quickbooks 2012 on the computer that is running Windows XP. The installation will start and get error "set.up.exe has encountered a problem and needs to close." I spoke with Quickbooks technical support on this issue, but they have been unable to solve the problem. I have read several of these posts on this forum about this kind of mistake, but none seem to be directly related to my situation. I plan to try to reload the Windows XP operating system, but unfortunately, the CD is missing. I'd appreciate any help that anyone could have.

  original title: setup.exe error

  Hi Bill Gammon,.

  You can go ahead and try the suggestions and if the problem persists then I you suggest to run the Microsoft Fixit and then try to install Quickbooks 2012.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Let us know if that helps.

• Updates Windows started failing on 05/11/2012. Get error 641

  Windows Vista Edition Home Premium on HP laptop.  It will not install any update .NET framework security.  Also Windows Update keeps trying to install updates to the Microsoft Office 2007 Suite.  I don't have Microsoft Office 2007 Suite on this computer!  Never have!   Cannot install the update of Silverlight security either!  Get error 641.   I have not had an update not to install more than a year!  Have removed all versions of .NET (1.1, 3.5, and 4.0) with dotnetfx_cleanup_tool and tried to reinstall - get error 641.  Tried to reregister Windows Installer - no help.  Impossible to reinstall Windows Installer - says I have the latest version and refuses to install.  I tried registry merge the Microsoft.com forum messages to only repair Windows install - no help.   Cannot restore the system - won't be back before 05/11/2012 because of all the restore points that are created each time it is impossible to install the updates!  Found no. Articles or Forum posts that address this issue or propose something that works.  Help!

  Update of security for Microsoft Silverlight (KB2636927)

  Download size: 6.6 MB

  Update type: Important

  This update of security for Silverlight includes the fixes described in KBs 2681578 and 2636927.  This update is compatible with web applications created by using earlier versions of Silverlight.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=231825

  Help and Support:
  http://go.Microsoft.com/fwlink/?LinkId=105787

  Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86

  Download size: 9.3 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  This update applies to Windows Vista Service Pack 2 and Windows Server 2008 Service Pack 2. The Microsoft .NET Framework 3.5 Service Pack 1 is a full cumulative update that contains many new features gradually based on .NET Framework 2.0, 3.0, 3.5 and includes the cumulative upkeep updates for .NET Framework 2.0 and .NET Framework 3.0 subcomponents. The .NET Framework 3.5 Family Update provides important application compatibility updates. This update is provided to you and under Windows Vista and Windows Server 2008 license terms.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=133335

  Help and Support:
  http://support.Microsoft.com

  Update of security suites for Microsoft Office 2007 (KB2596672)

  Download size: 997 KB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security in the suites vulnerability Microsoft Office 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2596672

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security suites for Microsoft Office 2007 (KB2596880)

  Download size: 2.0 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security in the suites vulnerability Microsoft Office 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2596880

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  Update of security suites for Microsoft Office 2007 (KB2597162)

  Download size: 7. 4 MB

  You may have to restart your computer for this update is taken into account.

  Update type: Important

  A security in the suites vulnerability Microsoft Office 2007 that could allow arbitrary code to run when opening a file modified for malicious purposes. This update resolves this vulnerability.

  More information:
  http://support.Microsoft.com/kb/2597162

  Help and Support:
  http://support.Microsoft.com/?ln=en-us

  There is no doubt in my mind that System Mechanic caused this!

  And you have plenty of company, too. See these recent discussions-online

  ~~~~~~~~~~~~~~~~~~~~~~~~

  OPTION A: If you have backups of ALL System Mechanic has EVER done on your computer changes, restore ALL the & restart and test - and then uninstall System Mechanic & some other registry cleaners. [1]

  OPTION B: methods to execute the RESOLUTIONS 1, 2 and 3 in http://support.microsoft.com/kb/2642495 then reboot & test.

  OPTION C: Contact System Mechanic (iolo.com) support, assuming you have purchased System Mechanic Professional.

  ===========================================================
  [1] TIP: If you ever think that your registry database must be cleaned, repaired, boosted, point, healed, twisted, fixed, magnified, "swept" or optimized (it isn't), read http://chris.pirillo.com/are-registry-cleaners-safe-to-use/ or http://www.edbott.com/weblog/2005/04/why-i-don ' t-use - Registry cleaners / and then draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

• After moving to Windows server 2012 VPN connection error

  Hello world!

  Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.

  I started from scratch by creating a new domain, user, accounts etc.

  The new server is using the same IP address as the old server.

  Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.

  When I try to connect to my Windows 7 laptop, I get this error:

  "Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."

  Any help with this is appreciated.

  Hello

  The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.

  TechNet Forum
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirt

  Hope this information is useful.

• LV 2011 (and 2012 LV) compilation error. Size not valid in _InstSize: 21

  I created a Subvi in LV8.5 to manage events UI outside a main vi. The Subvi gets control references who are registered for the events, through a queue that all actions are sent to a consumer case, nothing complicated. Everything works fine in LV8.5, but now I got all LV2011SP1 on a Windows 7 64 bit and I still get the same error:

  "Compile error. Report this issue to National Instruments Tech Support. Invalid size in _InstSize 21 "

  which appears 3 times. I tried to open the same code also in LV2012, same error... When you try to isolate the problem, I discovered that by disabling the code in 3 cases of greater consumption that I can get rid of the warning, but then I can't reduce the problem to one...

  Any ideas?

  Yes, the thing to put 'problem' labview code into a Subvi its own helped me as well.

  My speculation is that it forces the choice of another compiler (without the bug) path when compiling the source of the LV.

  I think you should file a bug report using the pages of http://ni.com/support .

  In this way we will have better tools in the future.

  BR,

  / Roger

• Windows 7 x 64, 4gig ram AMD phenomII quad core - backup error - 0x810000E4 error code

  failed 2 times; before a fresh reboot and after; Save a folder C: form to E:-a USB key.

  for a long time did a backup - usually works very well.
  check the event logs - I'll post 3 information for help - xml views a summaries.
  I couldn't find any information by performing a search of support technique microsoft
  What should I do for the backups to work again
  ?
  Thank you
  1st-
  The backup was not successful. The error is: there is a problem with the backup catalog. Restore from a different backup or create a new, full backup. (0x810000E4).
  -

  -

   

    4104

    2

    0

    0 x 80000000000000

   

    3117

    Application

    amdPhenomII

   

   

  -

    There is a problem with the backup catalog. Restore from a different backup or create a new, full backup. (0x810000E4)

    E4000081E30500003F0900005B090000420ED1665C2BEE174B64529CB14610EA71000000

   

   

  2nd-

  The main backup catalog is missing or damaged. Backup will use the secondary catalog.

  -

  -

   

    4105

    3

    0

    0 x 80000000000000

   

    3116

    Application

    amdPhenomII

   

   

  -

    000000006E0400006C04000000000000420E3197D9AF99159698CB700000000000000000

   

   
  3rd-
  The backup file for the session in time real "CMD. BE95A9B1-de15-4B78-B923-A12AB70BE951"has reached its maximum size. Therefore, will not record new events at the current session until space is available
  . This error is often caused by starting a session of track in real time mode without any consumer in real time.
  -

  -

   

    1

    0

    3

    1

    10

    0 x 8000000000000010

   

    64

   

   

    Microsoft-Windows-Kernel-EventTracing/Admin

    amdPhenomII

   

   

  -

    WDC. BE95A9B1-DE15-4B78-B923-A12AB70BE951

    3221225864

    256

   

   

  Hi emiddio,.

  I suggest you to run the check disk on your computer and the usb flash drive.
   
  1. open the computer by clicking the Start button, click computer.
  2. click on the drive you want to check, and then click Properties.
  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator
  password or confirmation, type the password or provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  4. click on start.

  For more information visit http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors

  Important: All performing hard disk the disk check if bad sectors are found on the disc hard when the disk check try to repair this area so all available data on this risk to be lost

  You can also try disabling the security software and check if the problem persists. Allow him to return after verification. After return to status so that we can help you better.
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Hope this information is useful.
   
  Umesh P - Microsoft Support

• Adobe Muse 2012.2 Update error: 1

  I can't get Muse to begin now, after the update to 2012.2 CC.  I have reinstalled many times.  Abandoned and put 2012.1 on my computer from a Time Machine backup.  Extremely frustrating.

  13 "macbook air mid-2012, OSX 10.9.5

  Hello

  Suggest you contact Adobe muse support using this link: contact customer service

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• movie maker 2012 16:9 rendering errors

  I hope you guys can help

  I used Movie Maker for years now, makig Time Lapse movies fropm photos

  After the new update, the film hovers between widescreen (16:9 & 4:3) - prior to the rendering of that all the photos go to the 4:3 format and normal despite being created in a 16:9 format - I have same resizeda ll of the pictures to try to resolve the problem without success

  On most of makes it, I get the video showing some photos of 4:3 16:9 and a few, so it seems to jump around :/

  Also which edition titles, legends etc new version not larger screen to the editing area, the preview at the box at the top left - which makes it impossible to publish the titles and refine.

  The system is Windows 7 x 64 on Intel Core i7, 16 GB of Ram with all the latest drivers, BIOS etc.
  Please keep in mind, I'm not new to this app, and before the update, this worked fone as I had used 2 weeks before :)

  I have over 25 years IT experience too, so I checked all the usual questions - drivers, etc - everything works fine, the CUDA on the GTX card works in other applications (not the MM uses)

  Any help appreciated

  OK, he showed now
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker-AV/Movie-Maker-2012-169-rendering-errors/83c40d4c-36b8-4fa8-9119-9504dbecf9c4

• Error checking of R2 2012 Windows error - 0 x 00000109 (0xb3b72be0442d2573, 0x00000000000001a0, 0xa3a01f59f1ad2764, 0 x 0000000000000007)

  Has anyone encounter this or have recommendations for more Windows 2012 R2 bugcheck error.

  Thank you

  Log name: System

  Source: Microsoft-Windows-WER-SystemErrorReporting

  Date: 10/23/2015 11:52:55

  Event ID: 1001

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  Computer:

  Description:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b72be0442d2573, 0x00000000000001a0, 0xa3a01f59f1ad2764, 0 x 0000000000000007). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 39250-102315-01.

  The event XML:

  1001

  0

  2

  0

  0

  0 x 80000000000000

  45069

  System

  ******

  0 x 00000109 (0xb3b72be0442d2573, 0x00000000000001a0, 0xa3a01f59f1ad2764, 0 x 0000000000000007)

  C:\Windows\MEMORY. DMP

  102315 39250-01

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Error QuickBooks 2012: QBW32. Out of unrecoverable Application EXE: application abandonment

  2012 QuickBooks first error message:

  QBW32. Out of unrecoverable Application EXE: application abandonment

  How can I fix it?

  Hi kernie,.

  Try the solution of this support of Intuit link.

  In case of failure, suggest you post in the Intuit forum for better support.

• How do I resolve error that "Acrobat failed to load its core DLL?

  How do I resolve error that "Acrobat failed to load its core DLL?

  I have already tried to remove and reinstall, still get the same error message. I am running Windows 7 and have Norton Antivirus.

  http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html