Wireless connection: adapter with no signal router

Similar Questions

• Connection adapter WMP54G problems for router WRT310N

  I just bought a new router (WRT310N) and now I have a problem connecting my Wireless PCI adapt (WMP54G) of my basement count to this router. The light on the adapter is turned off. I use Windows XP on my basement computer. When I right click on the connection wireless network and go to 'View available wireless networks' I see my home network listed. This is a secure (WPA) wireless network. When I click on to connect to the network, I have to type the network key, what I'm doing. Then he said "Please wait while windows connects to the ' * 'network, wait for the network..." ». After that, it tries to connect for about 2 minutes she stop trying and I am not always connected to the network. No one knows what might be wrong. Yet once the required to the WMP54G card account does not shine.

  Figured it out. Had to update the driver for the card WMP54G.

• Wireless connection from laptop to mobile route access

  I tried to connect my Internet to my laptop HP Sony X 10 mobile via wifi wireless.

  After that I created the wifi profile I can't find wifi on my mobile search and found the list name.

  My laptop computer adapter works correctly and configured. My mobile also search other networks wifi with no problems.

  Help me please to connect n mobile laptop

  Thank you

  Hi Chris,

  Thanks for posting your question in the Microsoft community.

  I understand that you want to connect your Sony phone to your Windows 7 computer, wireless. Let us know if this interpretation is erroneous.

  There is an article in the knowledge base that provides methods detailed on how to connect a device to your computer Windows 7 wireless, I suggest that you visit the link and try the methods.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Let us know if you need more assistance.

• Satellite C660 - wireless connection works with AC power

  I have problems with the connection Wireless on my laptop. It works when I plug in the power supply. It does not work when the laptop is running off the battery voltage.

  Is it possible to get the wireless to work without AC power?
  Thank you

  Please visit http://aps2.toshiba-tro.de/kb0/TSB12033H0001R01.htm
  I hope this will help you.

• HP officiate J6450 wireless set up with a new router

  With this new wireless router, I use the Wireless Setup Wizard. For some reason any enter the WEP key that consists of alphanumeric characters, I am unable to key numeric characters. Regardless of how many times I press the button, I see only alpha numeric characters only. Help, please

  First of all, do not use WEP!  He is not sure - it can be broken in 10 minutes approximately with the freeware.  Use WPA or WPA2 with a password of 13 + strong character that you create.

  There are two ways and I do not have a J6450 to help you.  Or keep hitting the key and the number should be the last of the list - GOLD-123, choose the menu keyboard.

• wireless connection (WRT300N) to the wired router (BEFSR41)

  itself...  I have nice small router 4 ports and a WRT300N that I attach to the router.  Looks like it should be 'easy' but it is not just plug n play.  I'm not an expert... probably the WRT300N must be differently configured when it is connected to a router if it was connected to the cable modem.

  Help is greatly appreciated.  Even if it's just a pointer to info - I don't mind doing my homework, but can't find anything about it in any documentation that I ran across.

  BTW, we have a good reason to not simply use the router without wire, so no need to think that, thanks...

  See my 23:00 04/11/09 post at this address:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=Wireless_Routers&message.ID=153670&q...

• Internet connection not working is not wireless, connected to two networks

  I have a problem connecting to the internet via the wireless connection. With a cable, I can connect to the home network and the internet. However with the radio, I have local access to the home network. In the network and sharing Center, it shows that I am connected to the home network but also to another unidentified network. When I click the Diagnostics button to see why there is no internet connection, he said that the problem is that there is more than one connection and that I should remove one of them. When I disconnect the network or unidentified network, they have both disconnect. I tried to reset the wireless adapter, reset the router and do a system restore and none of these worked. Does anyone have any suggestions?

  Hello
  1 did you change on your computer before this problem?
  2. What is the exact error message?
  Follow the suggestions and then check out.
  Method 1
  You can run the network troubleshooter utility.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2
  You can disable temporary, your security software and then check.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3
  Check if the problem persists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Method 4

  You can follow the procedure in the article.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357/en-us

   

  Method 5

  You can follow the procedure in the article.

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259/en-us

  See also:
  Network connection problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
  Using event logs Windows Network Diagnostics to solve network problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Windows-Network-Diagnostics-event-logs-to-solve-network-problems
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• The use of laptop Dell Inspiron 6000 with D - Link DIR - 615 router and a Wireless N adapter, but showing the G signal

  I have a Dell Inspiron 6000 laptop and I use a router D - Link DIR-615 and a Wireless N adapter, but when I checked my settings, I received only a G signal. What can I do to get a N signal?

  * original title - how will I know if my cell phone is compatible? *

  The chipset WiFi the only information that I could source on the Inspiron 6000 ranked either the Dell Wireless 1390 802. 11b / g card mini or Intel Pro/Wireless 2100 802. 11 b / g mini card.

  None of them is compatible with N.

• Problems with wireless USB adapter. Icon missing "Wireless network connection".

  I recently got a laptop HD malfunction cause me to start my PC from 2004. I bought a Belkin N150 Wireless USB adapter to connect to the internet connectivity. During the installation, I do not get a "Wireless network connection" icon I am running Windows XP SP3. I installed the same USB adapter on a computer running Windows XP SP2 and it works fine. I plugged it in my desktop PC and it just doesn't work! Even with my router disconnected I should still be able to see other networks WiFi available in the range (I live in a community of apartment) as he worked on the other computer it elsewhere too. I double checked the drivers, reboot the cable modem, so that appropriate services were activated and still no dice. I have read forums and I'm almost at the point of paying MS for technical support services, but it's really just my last step before I shell out money for professional help. Notice to lovers? =)

  Hello

  Well, at this point, you should make an executive decision.

  If you think that someone will take just guilt because it's comfortable, it is not going to happen.

  If a new card that is known to work does not work, then you can try to re - install Windows.

  One of the differences between computer enthusiasts and regular users is the availability of the material. I have a set of wireless router, network cards, etc. that are known to be good.

  The components are used for the sole purpose of trying them temporarily on the troubled computers to rule out hardware problems.

  -------------------------------
  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

• Router not connecting wireless pc whenever I was connected before with Ethernet cable...

  I have a laptop with Win Vista (Hp Pavilion), and I always have to connect to my wireless router (Thomson). Until now, I had a problem, especially with the bad weather a few times and I thought is about the quality of line.

  In general it wasn't working properly, I mean the connection. A few weeks now that I have another Laptop (mac) connect to the network, but always with a ethernet cable, I realized, then when I tried to connect via WiFi HP laptop, once again, is it just doesnot work... I almost every time to reset the router, to establish the wireless connection. No matter if the computer mac laptop is connected or not if a cable, I have no connection to the network, and I have reset the router. Subsequently, all right. Someone knows a possible reason? Thnx in advance...

  Hello

  I suggest you try the steps from the following link:

  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Post us the results once you try the steps above.

• I can't get a wireless connection. It comes up with a message saying that the adapter is not connected.

  Original title: Network card

  The laptop is a series of MSI CX600. I can't get a wireless connection. It comes up with a message saying that the adapter is not connected. The wireless adapter is not displayed next to the ethernet card but appears in the Device Manager and when you click the properties of network adapters listed that they all work normally

  Hello

  1A adapter ever worked?

  2 have you installed the disk supplied with the laptop?

  You can check that the installation of the drivers from here:

  http://www.msi.com/product/NB/CX600.HTML#/?DIV=driver&OS=Win7%2032

• When I try to connect with my wireless laptop will connect only to Local access. If I connect the laptop to the router with the ethernet cable, it works very well.

  VIsta - Local access only

  HI -.
  I recently moved.   I use the same router from my old apartment and I had no problem connection in the past.   Since I moved I have a new Time Warner modem (Cisco) and the modem works fine.

  The router also works very well I'm able to connect with my iPhone and IPad without any problem.

  But when I try to connect with my wireless laptop, it will only connect to Local access.    If I connect the laptop to the router with the ethernet cable, it works very well.

  It's a Dell Studio 15 with Vista.

  The computer is able to connect to wifi to other places without any problem, but for some reason that I can't connect home.   I tried to reset the modem and the router several times, but that did not help.   I tried the option repair & diagnose several times but it doesn't work.

  I tried to look for other solutions online and tried to disable IPv6, and while it helped some and I was able to connect wireless, the computer ran so slowly that it didn't seem like a good solution.

  This has been very frustrating.   Thanks in advance for any help or suggestion.
  Staci

  Hello Staciusa,

  Have you tried to change the wireless channel that your router is running at? There may be interference that could prevent the internet connection:

  Take a look at step 6 in this article that give more details about it:

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx

  If you need assistance to change the settings of the specific router, you will need to contact your router manufacturer or your internet service provider.

• Printer wireless connected but offline with new router Xfinity

  A FIOS Actiontec router wireless, printer HP 6515 functioned well as a wireless network printer.  Just replaced FIOS with Xfinity Cisco router.  Shows printer HP 6515 as connected (print network configuration page) but both PC (Windows 7) indicate printer is in offline mode (no check mark).  Printer has set the IP address with FIOS router.  Running doctor printing & scanning HP without success.  Suggestions?  Thank you!

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router. Can someone help me with the settings that could take care of this problem?

  I can't make a connection wifi with my Nook Color camera using a Microsoft MN - 700 wireless router.  Can someone help me with the settings that could take care of this problem? I have a Dell netbook and a laptop HP working with the router so I know it works.  The Nook also works in a Barnes & Noble store it seems so that the works of Nook.  I have a similar problem with a LG Vortex phone where I can't do the wi - fi connection.

  Please post on the Support forums technical Nook for help because it is not a Windows 7 problem...

  http://bookclubs.barnesandnoble.com/T5/nook-technical-support/BD-p/nooksupport

  .. .also than that...

  http://www.barnesandnoble.com/u/nook-support-connectivity/379002491/

  Don't forget the network encryption type, IE. WPA2/WPA and key/password / password must match the wireless router/access point.

  See also this about WPA2 on the MN-700...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-connect-to-MN-700-wireless-router/1789978f-7C90-4686-A956-2d17eb79960d

• My laptop cannot connect to the internet with the error (code 31) Qualcomm Atheros AR9485WB-EG Wireless Network Adapter

  Hi, my laptop have this problem cannot connect to the internet, but the bar shows that I am connected to the network, but without access to the internet.

  I tried someone's guide to uninstall the network adapter in Device Manager and then reinstall it again, but now I'm stuck with the laptop cannot even detect the wireless network and the "Qualcomm Atheros AR9485WB-EG Wireless Network Adapter ' on Device Manager displays this message"the device is not working properly because Windows cannot load the drivers required for this device. (Code 31)"

  I forgot since when this problem persists.

  Please help me with this problem of internet connection,

  List of maybe / don't may not be the problem:

  1. I had mcafee antivirus 3 weeks around which has already expired for about 50 days and I uninstalled to turn into kaspersky anti-virus

  2. my windows is still 8.0

  3 ASUS N56V

  4. browser chrome incognito window

  Thank you Mr President, I found a solution for this problem

  I just turn on the download via connections counters my PC-> devices config->download via connections counters

  and then I tried to enter the following command at the command prompt run as administrator

  netsh int ip reset c:\resetlog.txt

  I hope this helps anyone else having the same problem as mine

  Thank you again Sir