Wireless connection is off when you look purely at Youtube

Similar Questions

• My wireless connection turns off when I restart my computer.

  My Internet AT & T Uverse vendor sent me an adapter for my HP Compaq Presario windows XP computer's free wireless. However, once I installed it, it turned off everytime I restarted my computer. AT & T Uverse Tech Support says that it wasn't a problem with the software, but they can not help me with the settings on my computer. I tried everything I know to do the work of Wi - Fi, but no avail. Can someone help me? I'm at my wits end. Thank you!

  Hey Steve,

  What type of wireless network card did give you?
  It is a usb adapter and if so, what brand is it?
  You use the Windows XP Wireless Manager or software that has been installed with the adapter?
  It sounds like a problem with your wireless Manager did not remember network you connected to.
  I suggest to uninstall all software provided with your card and using only the Windows wireless:
  http://support.Microsoft.com/kb/870702
  I hope this helps.

• Windows update says it was installed successfully, but when you look at the list of the installed update it doesn't see the

  ORIGINAL TITLE: problem of update of Windows vista edition Home premium

  I just bought a laptop Toshiba of ebay, in excellent condition, the operating system is windows vista Home premium and the system is X 86 based. I have no trouble getting security updates or anyothers with the exception of SP1. When I do a windows update installation, it is said it was installed successfully, but when you look at the list update installed, it doesn't stand and she also works not highlighted on the sys.info page. I have already run the windows update fix the tool several times, but it doesn't solve the problem. Also update keeps telling me to install the SP1 package. I think that the number on the pack is KB96330 (not sure but I'll check in a few minuets when I go home for lunch). What should I do to get SP1 + 2 installed?

  .. .he had appeared as if it was handed to the way in which it left the factory.

  Looks can be deceiving, especially for what it is bought on eBay.

  [If you bought used shorts Jockey on eBay, would you wear them before you had washed in water hot & bleach?]  I hope not! ]

  See the poster in this thread and follow the instructions of (my) WHOLE (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://answers.microsoft.com/thread/c44429fb-3f7c-4646-8529-5a97bb3cd0eb

  If you need additional help with the new installation, you can start your own, new topic in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_vista-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

• HP Officejet 4630: Printing on both sides, no option to turn off when you print a Word Doc; When printing Pages

  Recently, when printing, the printer appear uses both sides of the paper, even when we don't want him. There is no option to turn it off when you print a Word document.

  
  When printing Pages it shows a checked box that says BOTH SIDES, if I uncheck, then it works.

  

  But from Word, there is no other choice. I tried the file/Preferences, I tried through the printer settings and nothing we can find will solve this problem? This has recently (last week or two) become a problem...

  Thank you!

  Hello @LaylaWi,

  Welcome to the Forums of HP Support!

  I would like to help you to solve the problem of double-sided printing that you experience when you try to print single-sided computer Mac OS X 10.9 to your HP Officejet 4630 e-all-in-one printer today. Please follow the steps below to disable duplex printing.

  1. Open a Word document
  2. Select file , and then click print
  3. Click on the drop down menu to the Copies and Pages and modify this provision
  4. Uncheck duplex .
  5. To change the additional print settings click on view details.

  -Source

  Ultimately, judging by the useful screenshots that you included in your post, you are in the right place to disable two-sided. You just need to click on the Copies & Pages for the appropriate options.

  Please reply to this message with the result of your troubleshooting. Good luck!

• I have a laptop on vista home-use. When you look in Control Panel - be uninstall, should there be several entries for SQL server, or one or none?

  I have a laptop on vista home-use.  When you look in the control panel - and then to uninstall, should there be several entries for SQL server, or one or none?  Each entry seems to have a different digital denotation, but apparently I should have only one entry maximum.

  The reason that I ask is that I have had problems in the software.  I want to uninstall everything that is not supposed to be there.

  Some lines of programs listed show information... some lines are completed.

  When you click on a line that is complete, I am allowed the usuall to uninstall, options etc.

  When you click on a line that is not complete, I'm not allowed the option uninstall.

  The Compact Edition and the full SQL Server can be installed at the same time without any problems. I saw SQL Server2005 apparently installed by a manufacturer, perhaps to support some software they have grouped in. He could have an Acer.

  I do not know what cause the problem with the uninstall option is not available. Information to fill in these fields are in the registry.

  HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall if you want to watch.

  It could be the result of a broken uninstall or a bad registry cleaner. I'm not aware of anything that would fix this. You can try this http://support.microsoft.com/mats/Program_Install_and_Uninstall

  but you may have to reinstall programs later.

  You need two redistributable Visual C++ if you have programs that need it, which is likely. They had several updates that fits into the list programs. I have two for 2005 and six for 2008.

• should I turn the printer off when you are not using it?

  you just buy new printer - HP envy 5530 - need to know if I need put it off when you are not using it or if it passes in mode "sleep"?  other printers I had went to sleep mode however cannot locate this answer in the FAQ - like entry - thanks ~ ) husband

  Welcome to the mgchandler forums,

  I saw your post on want to know if you should be powered down the printer or if it won't fall in the mode 'sleep'. My best advice would be to turn off the printer by the power button if it will not be used for a period of time, for example during the night. Regards the mode "standby", the printer goes into standby after 5, 10 or 15 minutes of inactivity.

  • To change the settings for sleep mode, go to the front screen of the printer and press settings (wrench)
  • Contact preferences
  • Press the arrow down and on Standby Mode when you see
  • You can now change the time of mode 5 to 10 to 15 minutes before

  User - Guide Page 93 + 94 for Info Sleep Mode

  I hope I helped answer your question!

  Have a great Tuesday

• When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers. What they mean/stand for?

  When you look at the Macros in Excel, I see 'Ne01' and 'Ne02"used in conjunction with my printers.  What they mean/stand for?

  Network 01 for a network printer port.

• I use windows 10 on pc. Creative cloud must update. He gets 2% and keep saying "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom will not wor

  I use windows 10 on pc. Creative cloud must update. He arrived at 2% and stops, saying: "error code: 81 please close the other setup programs" when you look at the Task Manager, no setup program is running. What should I do? Photoshop and Lightroom do not work for me right now.

  Close applications or contradictory processes

  Solve the problems of downloading and installation of Adobe Creative Cloud

  Mylenium

• When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

  When you look at the performance of a virtual machine, when you make a graphic of 3 months it appears correctly for the first two, but the last month is compressed.

  Hello

  When you say that the last two months are compressed. I do not have what exactly you mean by that. Is there a chance you can attach a screenshot of the same thing? Also let me know if there are any made VC-database activity recently?

• Compaq 6910p - wireless adapter turns off when the ethernet cable is connected

  Hi all

  Then, when I plug in an ethernet cable (connected to a router), my wireless adapter turns off.

  He immediately turns on when I unplug the ethernet cable.

  It isn't really a problem, either connection will provide my needs of networking, but it's just weird and I don't like it.

  Using Win7 Ultimate 64 bit.

  advice would be appreciated.

  Hello:

  This is the default setting to save the battery.

  If you always want the wireless on, go into BIOS > Menu of device Configuration and activation to deactivate WLAN-LAN.

• Difficulty 'Not connected' Error Messages When you try to access Web Services

  If you are running on an error message on your printer stating that it is "not connected" when you try to access ePrint or your applications, but you know that it is connected to the internet, it probably just means that the printer does not connect to the server properly.

  Here's the first set of markets, I will try, as they seem to solve this problem deliver half the time.

  • The first thing I'd like to try in this situation is a reboot of the system.
  • First, unplug the power cord at the back of your router.
  • Then unplug the power either to the back of the printer or the wall without it first turn.
  • Wait about 30 seconds and reconnect the power cord to your router.
  • Wait about another 30 seconds and reconnect the printer. It should start back up automatically, but if it is not moving forward and press the power button.
  • Once everything is back running, try to access ePrint or your applications.

  If these steps do not work for you, the next thing would be to establish a static IP & DNS for the printer. Before doing this, you want to print a Network Setup page. It varies from a model, but usually found under settings wireless or in reports in the Setup menu. After that you have this page, follow these steps.

  Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.

  • After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.
  • Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).
  • Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.
  • For the primary or the preferred DNS server, you will want to enter 8.8.8.8.
  • For secondary school or another DNS server, you will want to write 8.8.4.4.
  • Click on apply and when the message appears saying that the changes have been applied, press 'OK '.
  • Press the power button on your printer, wait that it completely power off and press it again to power it on.
  • After doing this, go ahead and try to activate ePrint again.

  These measures should fix this for you. If they don't, then something else can cause this problem for you. Reply in this thread if these steps do not work, and I'll see if I can help figure you out what might be causing the problem.

• Time Capsule turn off when you try to access

  1. I have a TC (A1409) with a WD Caviar 2 TB (replacing the HARD drive)
  2. Now, it stops when you try to access the HARD drive on my mac. I mean, it's on, green light, all ok and then I try to look for something on the HDD and it turned off.
  3. It does not work this way, at the beginning he worked just perfect!

  Any ideas?

  Thank you!

  FWIW, the 4th generation of Capsules of time had problems with their power supplies, specifically because of an overheating. This may not be directly related to your question; However, you use a replacement drive that may be overloading power of the TC.

  Given that the problem only occurs when access them the disk, which will rotate upward and consume more energy, may be the reason why you have this problem.

• WT200 3G - manager says wireless connection is off

  Can someone please. I have a Tablet WT200 and try to use/installation of the component of the 3G...
  But the wireless connection manager continues to tell me that the radio is turned off.

  There is no switch and I've searched the net for a solution but I have seen the same question but not the answer.

  Help me! PLEASE, I BEG YOU!

  Does not WT200 Tablet contain a physical switch to turn on WLan. You must ensure that the communications function wireless (in Win 7 settings) is enabled!

  You can do this in the start menu-> Control Panel-> network and internet-> network and sharing Center
  Here, press Set new connection or a network

  At least, you should go to: start-> all programs-> Toshiba-> network & connectivity-> Wlan indicator settings
  and may display the State of the Wlan connection system

• ConfigFree on Satellite A80: wireless switch is OFF, when its actually

  I've seen several comments on this problem, none of them is resolved.
  I'm running an A80. Until I updated the driver wireless and Configfree, Configfree has worked well.
  Now, however, no matter what I do, any driver, I installed, or what version of Configfree, now they all insist that the wireless to cut when it is indeed running.
  Everything except the Radar works very well. Even now, I am connected to the wireless network.
  However - by selecting the Configfree Radar showed the error message
  "Wireless is disabled. Please activate the wireless communication switch.

  It drives me crazy. I spent three days on this problem. I guess that's not really necessary, because it is only a display - but I want it to work! :-)
  I am a very experienced user, but this one is difficult. because I suspect its software based really.
  I can't believe that in the world, with many people to see this problem, that Toshiba does not found the difinitive this problem cause and posted a fix.

  In summary.
  With original features such as pronounced - it worked and displayed near the wireless stations.

  After the upgrade to the latest drivers wireless and Configfree - Configfree actually works but WILL NOT operate the Radar, because he insists on the fact that the wireless switch is DISABLED, when in fact it is powered.

  I tried everything, including the FN + F8 - which also seems to be unresponsive. But it could be another problem, I hope. Not interested in this, because the wireless is still on.

  If anyone has a solution that works, I'd love to hear about it.
  Thank you
  Robert

  Hello, Robert

  In my opinion ConfigFree is one of the best utilities offered by Toshiba. This utility is pre-installed, I think, on all models of laptops Windows XP Home edition, and I can't imagine that there is a bug.

  All of the tools and utilities that you can find in recovery image is suitable for each model of laptop, tested and I really can't imagine that such bug may be there. It is very interesting that you wrote on update. Sorry but I checked the original version and the version offered on the Toshiba download page, and they are absolutely identical (ConfigFree V5.00.45).

  I use two Toshiba laptops, both with WXP and I use the CofigFree version that is included in the recovery image. It works perfectly and I see no reason for update (if this update exists, but I don't believe that).

  So it will be interesting to know what version of ConfigFree you use and where you have founded an update. Please be so kind and give us more information about this update.

  Maybe a few links to other multiple posts may also be useful.

• Wireless Internet disconnects when you watch flash on Youtube videos.

  This question is a little complex, that similar to other problems that I posted on this site. You see, I use a WIRELESS connection to my router. It has a 5 signal bars. The only problem is that given a random time my wireless icon mysteriously change this: http://2.bp.blogspot.com/-Lqg5HYU8tgs/TgroiitlyMI/AAAAAAAACSQ/5A8WZdd-D9A/s1600/Wifi+signal+bars.png (pretend it's white) for this: http://4.bp.blogspot.com/_Rf56AL-pm3Y/TAJR5p2BpkI/AAAAAAAAFK4/9HiavvCL6nI/s320/wifi-network-icon.gif

  It's strange because is not supposed to change the icon of wifi with the Red Cross? It never becomes the red x. I tried to reinstall the driver for the integrated card that and the problem persists. It does especially when watching Youtube videos. Sometimes it can happen at any time. Help, please.

  Hello

  If you use Firefox, I suggest you to send your request from the link and check.

  http://support.Mozilla.org/en-us/home