wireless connection on laptop

Similar Questions

• HP Officejet 7612: Also how wireless connect my laptop to my printer? (Already connected Dell desktop computer)

  I just bought a printer Officejet 7612.

  I have setup my Dell desktop (windows XP, ASUS router) with a wireless connection to the printer successfully.

  My Dell desktop computer is connected to the router via a cable ethernet ASUS.

  I thought that my laptop (Fujitsu T900, windows 7) would automatically see the printer; but it doesn't work.

  The laptop connects wireless to my ASUS router to access the Internet.

  For my laptop see the printer Officejet 7612 - do I also need to install the software suite Officejet 7612 whole on the laptop (as I already did on my desktop Dell computer)?

  Thank you once more!

  (I apologize in advance because this is probably a stupid question

  Hello @Scooby777,

  Welcome to the HP support forums.

  Certainly not a stupid question.

  The answer is: Yes, you need to install the software on all your devices.

  You can also choose to install the base drivers.

  Base drivers will give you all the features of the printer.

  If you need additional assistance, please let me know.

• Drivers of wireless connection for laptop HP G6-1138ee

  I just downloaded a new window of operating system 64-bit on my laptop, but I can't seem to find drivers or software for the wireless connection, wpuld anyhelp much appreciated

  You are the very welcome.

  I think I can get the drivers you need.

  For the 8086, you need the chipset driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5131854&sw_lang=

  For the 10EC, you need this:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5131854&sw_lang=

  Paul

• Wireless connection from laptop to mobile route access

  I tried to connect my Internet to my laptop HP Sony X 10 mobile via wifi wireless.

  After that I created the wifi profile I can't find wifi on my mobile search and found the list name.

  My laptop computer adapter works correctly and configured. My mobile also search other networks wifi with no problems.

  Help me please to connect n mobile laptop

  Thank you

  Hi Chris,

  Thanks for posting your question in the Microsoft community.

  I understand that you want to connect your Sony phone to your Windows 7 computer, wireless. Let us know if this interpretation is erroneous.

  There is an article in the knowledge base that provides methods detailed on how to connect a device to your computer Windows 7 wireless, I suggest that you visit the link and try the methods.

  Connect to Bluetooth and other wireless or network devices

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  Let us know if you need more assistance.

• Windows 8 drops wireless connection on laptop

  After having upgraded my Alienware m9700 to Windows 8 (starting from Windows 7), I now have questions where the wireless stops simply work. I have to refresh the scan wireless and reconnect to the router to connect. I can assign it directly to Windows 8 as I have other computers-by-side that are not running Windows 8 and do not drop the connection. Also, I changed the network cards to see if mine was a problem. Two adapters abandon the connection. I ran the laptop at the time allowed and they fall at the same time. I ran each separately and they fall. Yet once, it never happened with Windows 7.

  Any thoughts?

  A short version of my answer, it's what you think.  Windows 8 has a bug wireless where he will fall from the wireless network connections.  I saw where Windows 8 shows you're connected to a wireless network and the system is not actually connected.  Basically, wireless in Windows 8 connections are not strong and unpredictable.

  There are a lot of these type of discussions found here and elsewhere (in other forums) about Windows 8 wireless network connection problems.  Windows 8 tablets are also facing this problem.

• Loss of wireless connection on Satellite Pro L10

  I have a Toshiba Satellite Pro L10, with wireless capabilities built-in. I recently bought an ADSL Modem Belkin Wireless G Router. My desktop PC can connect to the internet via cable and cannot therefore have my laptop. However, when I connect to the internet via wireless connection my laptop sometimes everything stops. This isn't something to signal that I'm only about 2 feet from the router, and it is not that I can't connect to the internet, as I am on this at the moment. Is that in a few minutes, the connection will be lost and I can't seem to find what I can do about it.

  The other problem is that when I click the icon at the bottom right of the screen, the "Wireless network connection" window opens. Here, it shows the wireless network I'm trying to connect and it shows with a strong signal, but it is almost always said not 'connected '. He said never 'connected', even when I am connected to the net and surf away!

  Anyone has any ideas at all?

  It sounds a little to the Wireless LAN card is unable to obtain a valid IP address.
  These interruptions may occur for different reasons.
  But especially the new version of the driver Wlan and/or Bios should help resolve these interruptions.

  What card Wlan do you use?
  If you are using the Intel Wlan card you can also visit the Intel Web site to download the most recent version of the WLan driver.
  Please also compare the BIOS version available on the Tosh site with the version preinstalled on your laptop.

  Wlan card properties contain some useful options that could improve the quality of the connection. Energy saving options should also be required to check other functions in the tab advanced and disabled.

• How to make the computer to look for SBRIO on a LAN connection when wireless connections LAN and are active

  Hello

  I plugged my laptop to a SBRIO using a cable, I also did the same mask subnet the SBRIO and my wireless connection for laptop is also active. I run an application to transfer files from the network to the SBRIO. I was able to download the files from the network using the wireless, but when I try to transfer the files from the laptop to the SBRIO the application attempts to use the wireless instead of the connection to the local network. Is there anyway that I can apply to use the LAN connection instead of wireless?

  Thank you

  Mouda.

  You must manually configure the settings for the SBRIO and map NETWORK cable on the PC. They must be presented on the same subnet. Using the crossover cable, you can configure your PC to use an address like 192.168.0.10 with a subnet mask of 255.255.255.0. Configure the SBRIO to use an address as 192.168.0.11 with a subnet mask of 255.255.255.0. The PC uses the network connection by default for all addresses that do not match the specific subnet on teaching secondary (cable in your case) NIC

• Two years trying to get Toshiba laptop wireless connection works

  I tried for two years to try and get the connection Wireless on my Toshiba laptop to work without much success. For a short period I managed to connect the laptop to a desktop computer's ad-hoc wireless and share the internet connection in this way but then it stopped working.

  I have a Toshiba Satellite Pro U400 - 15L model no PSU45E-00J005EN. It is with the 12.1 "screen and running Windows XP Pro sp3.

  My wireless switch on the front of the laptop is turned on. It is also activated in the software Fn F5 wireless enabled, disabled bluetooth. I don't have Intel ProSet.

  Already when I was able to establish an ad hoc connection using microsofts software. I had to manually activate the Wireless Zero Configuration (WZC) whenever even if, as he always began with disabilities or order even if I set it to start automatically. It is a monumental PITA.

  When I try and connect to the ADSL wireless router (Belkin N150) using the Toshiba Software, I get the message error "application from another provider is controlling the wireless adapter.

  I get all the time, even though I turned off Microsoft Wireless Zero Configuration (WZC).

  I thought that Windows controlled always somehow it even though I disabled WZC, so after reading solutions in other posts, that I tried to go...

  -> Control Panel-> network connections-> wireless-> properties-wireless networks tab > uncheck "use Windows to configure...". ».

  But unfortunately there is not 'the wireless networks tab' in there, all I have is the other two tabs. And since trying to use Toshibas software to connect wireless using their Radar thing, now when I click the wireless network connection in there the message "Windows cannot configure this wireless connection. If you have enabled another program to configure this wireless connection, use that software. »

  Can someone on the forum or using Toshiba please?

  Thank you

  John

  Two years? Sorry, but I can't believe it.

  If everything is Ok and I mean if there is no hardware problem you n t need more than two minutes for the WLAN configuration.

  As a first step, you must be sure that the wireless network card is installed correctly (Device Manager).
  Wireless network card must also be enabled correctly (switch > check FN + F8 > check ConfigFree tool).
  When the wireless network card that it is correctly enabled scan (check the status of ConfigFree) the area with RADAR option in ConfigFree.
  You will find this option?
  You can scan the area?
  Some WLAN is visible for your laptop?

• Laptop running Win Vista will not print wireless connection

  I have a problem I'm trying to print on a printer of all-in-one HP Photosmart 2575 of my laptop.  The laptop is running Windows Vista and connect to the network using a Linksys WRT54G2 router is using.  The printer is connected by Ethernet cable to my desktop (Windows XP), and it prints fine.  No matter what I do to print via the wireless router, nothing happens except that the print output only goes to print that and sits down.

  I down loaded the software HP2575 of Vista and updates directly from the HP site.

  Six days ago, when I first installed everything on the new laptop, I did a test print very well.

  Computer portable printer is configured to print documents Spool and using the Port "Dot4_001 HP Device.  In addition, it has the value "share this printer."

  I tried a test and connected the laptop to the printer using a USB connection, and that runs just OK.  Wireless internet works fine for web connections.

  So, what have I done wrong

  I finally solved the problem. I don't know why it works this time.

• My laptop lost wireless connection after hibernation I or stop it. Then I have to reset the automatic Wireless Configuration to find my wireless connection

  I just bought a new NetGear wireless router and now my laptop lost wireless connection after hibernation I or stop it.  Then I have to reset the automatic Wireless Configuration to find my wireless connection.  Whenever I stopped him it and I have to choose.  This does not happen on another laptop or desktop that I have.  Is there a safe solution for this?

  Hi Ron,

  1 Windows operating system you are using?

  2. you receive messages or error codes?

  You can read the following article and check.

  Windows wireless and wired network connection problems

  If you use Windows XP, then read the following article:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  This problem can also occur when the power management profile turns off your network card.

  You can try the following steps and check if it helps.

  a. click Start, type device manager in start search and press ENTER.

  (b) in Device Manager, expand network adapter.

  c. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  d. go to the power management tab.

  e. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).

  f. If you have disabled the boxes, click ok and restart your system. Put the computer in Hibernate mode and check if you still have any questions.

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.

• Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Im trying to fill the network so my ps2 connections can use the signal wireless to my laptop running vista Basic. When I click to bridge, I get a message saying that I need at least 2 internet connections. is this in any way about this?

  Hi Jer9009,

  Welcome to the Microsoft answers site.

  ·         Could you give the exact error code or error number you get?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  For more information, see the link: create a network bridge:http://windows.microsoft.com/en-US/windows-vista/Create-a-network-bridge

  Add a connection to a network bridge: http://windows.microsoft.com/en-us/windows-vista/Add-a-connection-to-a-network-bridge

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  My laptop does not work on a wireless connection that I have to use the yellow Ethernet cable to use internet.

  I followed the instructions on my laptop on how to connect to broadband and I even called the company from whom get connection but they could n, t help me. I need help! I want to use my wireless laptop and how do I do it?

  Hi Hn_668,

  See the articles below and check if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

  My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

  The following diagnostic information:

  1. Connect your laptop wireless so that you can "read the files on your desktop."
  2. Open a command prompt window (start > run > cmd > OK)
  3. Type the following command in the black command prompt window and press enter

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".

  4. Let the window open orders and "hard wire" your laptop to connect to Internet
  5. Type the following commands in the black command prompt window and press ENTER after each one

     ipconfig/all > "% userprofile%\Desktop\testdata.txt".
     Notepad '% userprofile%\Desktop\testdata.txt '.

  6. Copy and paste the contents of the testdata.txt file into your answer here

  Please note that there are 2 for the second command ipconfig > characters.

  You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.