Wireless HP Officejet 4500 G510n all-in-one printer

Similar Questions

• HP Officejet 4635 e-all-in-one printer prints multi-page document

  Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

  My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

  I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

  I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

  I wish I had a solution to this problem.

  Thank you very much.

  Helen Marie Kennedy

  Have you tried full install driver software?  OJ4630_188.exe

  Exit the: 08-04-2014

• Scanning problems on wireless HP Officejet 4500 G510n-z

  I'm about to throw this printer/scanner at the door!  I love this scanner but since I had to buy a new computer

  with windows 8, no driver disc to install my software disc, I can't seem to get a complete reinstallation of HP programs to install the Center and I don't dare hit the 'add a device' since I reinstalled the full installation software, my computer wants to continue to try to reinstall the application when well even it is already installed.   I uninstalled, cleaned and reinstalled and no still no solution Center.  HP also claims that there are no drivers for the center of solutions for windows 8.  Is this true?   My scanner is 1 year old.  Everything suggests to use the windows fax and scan.  Tried, how ever it stinks and it works not just for what I need it to do.  It is the second time I bought a HP scanner and a year later have problems with the application.  I think I've read all the blogs you have posted and tried all the links so far.  I know not what is missing... It is the center of solution and I can't seem to find a way to recover.  I have an ASUS with windows 8. Help, please!   If I have to buy another printer... I will never buy another HP product again.  Ink cartridges cost almost 60.00 it's half the price of the printer. Please help... Thank you very much for your time

  Hi wincrazy,

  "There is no drivers for the center of solutions for windows 8."  Is this true? "No, that's not true and I can help you get the Solution Center.

  Please follow the instructions below to completely remove the current 4500 software and then re-install complete software functionality, including the Solution Center.

  1. Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > HP Officejet 4500 G510n Full Feature Software and Driver
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the Util folder
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have a not HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

  Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

  I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

  I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

  The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

  I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

  Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

• HP ENVY 4500 e-all-in-one printer/Mac OS 10.6 / cannot scan multiple pages in the single file/document

  Mac OS X 10.6.8

  HP Scan app 4.4.1

  In the ENVY of HP printer 4500 e-all-in-one support page for scanning with a full feature driver installed. Under "how to scan an original of several page into one file for HP Scan version 4.0 of the software. Everything is okay until after I scanned the documents and click on 'Done '. (Step 6) & click send , click the folder , name your file, and then save the file on the computer. (Step # 7)

  Is where I'm going wrong. I can't find the Format drop-down to complete steps 8 and 9.

  1. Click the dropdown Format menu, select the content , and then check the box to Save all items in a single file .
  2. Click Save .

  Hi milolo,

  Thanks for your post and welcome to the HP Forum.

  Please make sure that you select PDF or searchable PDF as the Format. You should then find a box to check the 'combined in one document.

• HP Officejet Pro L7590 all-in-one printer (prints half of the pages & gibberish)

  My HP Officejet Pro L7590 1.5 year, all-in-one has decided he wants to print a half pages & then gibberish or page 1 of a document of several pages & then turn the remaining blanks pages or gibberish.  It started about 3 weeks after a Windows Update (I do not push this update because this may just be a coincidence).  I rolled power computer & printer. I also made sure to have the most current printer driver.  I have uninstalled & reinstalled the unit 3 times now.  I checked the settings of the queue as well.  Initially, the problem seems to happen when I rolled up a job to the printer and then closed the application or document that I wanted to print by going to work on something else (like I always did).  Now, it happens whenever he wants to.  I then delete the pending print job & power cycle sometimes even the printer to act again on the right.  I'm pretty tech savvy - I do IT for our office, unless it is over my head.  What can you try me & this problem?

  If it happens again I suggest to reset the spooler via the command console and then try printing again.

  Start > run > command

  net stop Spooler
  net start Spooler

• E-all-in-one printer, HP Officejet 5742: e-all-in-one printer, HP Officejet 5742 range

  When you scan a document with the printer Officejet-5742, I had a 'tick box' selectable if I wanted to scan both sides of a page. The process was not automatic, after scanning one side of a (or multiple pages) a window opens asking the user to delete the pages, turn them and put them in the feeder. By clicking on the button "OK" in the window of the program would continue to analyze the other side of the pages and, if several pages, organize the scans in the correct order

  Today (16 August 04) I installed the last 'Full Software', as requested by the HP software. There is now no option scan side 2. I contacted HP support by phone (Ref: 3030910759) and said ultimately this model does a face scan. I said it was 2 sides the morning but not update. They don't have to give me some help so I said I would try a different approach.

  I can make 2 sides by selecting 'Add' page but that is not as simple as selecting a checkbox and is not effective if make a stack of pages.

  Any ideas?

  Best regards, DELETE.

  Hello
  
  Thank you for using the HP Forums.

  You can try this alternative software?

  HP extended Scan
  
  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
  
  Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.

  This relevant resource will show you how face 2 document analysis.

  HP Officejet Pro 6960: Scan a document of 6 pages 2 sides using the ADF

  Let us know if it works.

• HP Officejet 6600 e-all-in-one printer - H711a/H711g 'Ink system failure', will not print computer

  At first, it was just a problem with do not print from the computer.  Error messages had to do with the failure of the print head or do not find print head, etc..  After going through several different controls online, download the scans, etc., it does not at all, print showing an error message "ink system failure".  I tried to remove and reinsert the 4 printheads (black 932, 933 colors) and turning market and check the caps and unplug the power.  Since this is a wireless network, I can't unplug the USB.  It was the OK signal.  Now, with this error message, I don't see the home screen printer controls.  It just says: put it on and then contact HP.  Help, please.  Very frustrated (it didn't happen all at once - a first he wouldn't print from the computer sometimes, other times.)

  Wildrat58,

  If you get ink system failure and you've been through the steps that are listed in the article above the printer may require troubleshooting. You can reach support - 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.

  Good luck!

• HP Officejet 4630 e-all-in-one printer problem

  I installed all the software and ran all the tests and pass all areas. Test print comes out very well. But when I try to send something to the printer, nothing happens, the printer just sits there. Anyone know what could be the problem?

  I still don't believe it, but I took a chance and pulled the USB out and then plugged in. It worked.

• HPOfficejet 4632 Print Fax Sca: sent faxes see the wrong date on HP Officejet 4630 e-all-in-one printer

  The date on the faxes that I send show dates in March 2014; the time is correct.

  Nothing in the installation process which called dates.

  This is the Date and time on the device (which has been the first time that the device is set up). You can update this info on the device by using the control panel.

• Not able to scan with the HP Officejet 4500 G510n-z wireless printer

  Original title - program programs application Applications compatibility

  I bought a laptop DELL Inspiration with Windows 8.  I have connected a printer wireless HP Officejet 4500 G510n-z to my laptop; However, I am not able to scan a document to my printer and send to my laptop.

  I went on HP website to download the 64 bit version of the driver however still not able to scan.  I noticed that the version of printer driver that I downloaded is 350 a - f.  Appreciate any feedback on how to solve this problem, I just need to buy a HP-Officejet printer is Windows 8?

  Hello

  As OEM HP is responsible for the proper functioning of the printer/scanner
  and their drivers. Check with HP support, their documentation online
  and drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - printers supported for Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&cc=us&DLC=en&LC=en&product=3794625

  HP - how to get your printer works with Windows 8
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03494007&cc=us&DLC=en&LC=en

  HP Officejet 4500 Wireless all-in - One Printer - G510n - Support & Troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP & Driver software downloads - HP Officejet 4500 Wireless All-- One Printer - G510n in
  < -="" set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ================================================

  The main issue is probably the drivers, but these can help:

  Windows 8 - Fix printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Windows 8 - How to troubleshoot printing problems in Windows
  http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problems

  Windows 8 - install a printer
  http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer

  Windows 8 - find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows-8/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet 5746 e-all-in-one: HOW to connect android phone randomly to print the data of the phone?

  I have Macbook & Office XP connected to the printer (HP Officejet 5746 e-all-in-one printer) necessary to connect Random cell phones to print the data.  All directions?  TIA Doc

  You need a wireless setup to print from Android phones.

  Please see this link for mobile printing options available:

  http://www.HP.com/go/mobileprinting/

  WyreNut

• OfficeJet 4620: Hangs of HP Officejet 4620 e - all - in - one

  Recently, the printer showed a message on the screen saying "use switch to turn the printer off. The printer does not have a press button. I can unplug the unit and it seems to do normal start when I plug it in but returns the message and it crashes. It will stay like this for hours or days until I unplug the unit. After that I had plugged in I was able to hold the power button and get it into the stop. After being off, I press the power button and it came back but once more posted this message and hung.

  It does not what whether the computer when it is connected via a USB cable. It seems that I can press the power button and it will fit as long I have before tap the blue wireless starts to Flash. After that it will not respond to any key.

  Please notify.

  Hey @clevbucki,

  I see that you have some problems with an error message on your Officejet 4620 e-all-in-one printer you can not delete. If the message is related to a bad power off of the it sounds more like you have a problem with the buttons on the printer. The only thing that could be done would be to replace the printer. You can contact HP support by clicking here and filling out the form below.

  I hope that you are able to get this resolved so that you are able to resume printing.

• HP Officejet 4500 G510n-z for windows 7

  This printer works wiyhout no problem, then all of a sudden he is no longer scan, copy or fax. Notice of default appears in the display.  It will still print computer.  I have reset the printer and you have done everything I know to do.  need help!  Puzzled-1

  My HP Officejet 4500 G510n-z ceased to print certain documents from my computer. It allows to print an e mail but not my bank statement

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.