Wireless network - please help!

We have here a weird.  Our new "HP Photosmart Wireless e-all-in-one printer - B110a" worked beautifully until I tried to scan a document to my laptop this weekend.  Somehow he broke up the network connection while none of the 3 pc in the House can print to the printer (it appears offline).  However, the network said connection report everything is ok, we can access the web via the 'Apps' option and works of eprint.  We have tried everything... Please help!

We will set an IP address of the printer:

-Print a the front of the printer Network Setup Page. Note the IP address of the printer.
-Enter the IP address in a browser to reveal the internal settings of the printer.
-Choose the network tab, then wireless along the left side, then on the IPv4 tab.
-On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you don't know it, enter the current IP address.
-Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
-Enter the IP of your router (trimmed du.1) for the bridge and the first DNS. Let the second white.
-Click 'apply '.

Now, stop the router and printer, start the router, wait, and then start printing.

After that, you will have to redo 'Add printer' using the new IP address.

Tags: HP Printers

Similar Questions

  • WRT54G v3 does not establish a wireless connection - Please HELP!

    My modem and wireless router both seem to be fully functional. Yet, the only way that my computer connects to the internet is if I connect directly to the router. It's as if my computer can't find the router... my SSID is sometimes only appear in the list of available network connections and when that happens, will not make a connection... How can I solve this problem? I'm not super intelligent computer, but I can follow directions well. Help, please!

    Connect the computer to the router with the Ethernet cable.

    Open the router setup page and go to the Wireless tab, change the name of the wireless network to create a new wireless network. Change the channel to 11. Save the settings.

    Go to wireless security tab Change the WPA/WPA2 wireless security mode and enter the password of the wireless network. Save the settings.

    Click the sub-tab to Wireless MAC filter and make sure that it is disabled.

    Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings.

    Now try to connect to the new wireless network and see if it works.

  • Windows Vista cannot find any networks - please help!

    On my laptop Windows Vista comes preinstalled and can have no problem finding networks.

    I also have Ubuntu on my laptop and it is detects networks easily.

    I was told it might be the driver... However, I don't know where to find the latest drivers for Vista.

    Nobody knows exactly where to find them? I am eager to find a simple solution if it is not the drivers.

    I appreciate any help you can give me. There is no sense to me why he does not find networks, including in my house. Thank you!

    Hello

    1. How do you know that the problem is related to the drivers?

    2. you remember to make changes before the hardware or software issue?

    3. What is the brand and model of your system?

    Method 1:

    You can read the following article and try to run the troubleshooter.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    We can also refer to the computer or the device manufacturer's Web site and try to install the latest version of the drivers.

    Update drivers: recommended links

    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  • Problem with my wireless card please help me!

    Hi all, I recently bought an Inspiron 3537 provided with ubuntu windows. I have install Windows 8.1 Pro with media center 64 bit for compatibility with my other program and I find almost all the drivers except the wireless.

    System model number: Inspiron 3537

    Operating system: Windows 8.1 Pro with media center 64 bit

    Card wireless driver

    PCI\VEN_168C & DEV_0036 & SUBSYS_020C1028 & REV_01

    PCI\VEN_168C & DEV_0036 & SUBSYS_020C1028

    PCI\VEN_168C & DEV_0036 & CC_028000

    PCI\VEN_168C & DEV_0036 & CC_0280

    I scan the computer with the wireless device and a tool seem to be a Qualcomm Atheros QCA9565 / AR9565 wireless network adapter

    Can anyone help me find these drivers? Thank you

    Dell Wireless 1705

    Hardware ID: PCI\VEN_168C & DEV_0036 PCI\VEN_168C & DEV_0036 & SUBSYS_020C1028 & REV_01 PCI\VEN_168C & DEV_0036 & SUBSYS_020C1028 PCI\VEN_168C & DEV_0036 & CC_028000 PCI\VEN_168C & DEV_0036 & CC_0280 provider: Driver Atheros AR956x 7 × 86, 7 × 64:http://ftp.us.dell.com/FOLDER02013099M/1/Network_Driver_DVTW2_WN_10.0.0.276_A00.EXE 10.0.0.276 Driver 8.1 × 86, 8.1 × 64: http://ftp.us.dell.com/FOLDER02013131M/1/Network_Driver_HP06Y_WN_10.0.0.276_A00.EXE 10.0.0.276

    Unofficial site of the Czech Atheros driver

  • Unable to connect to the wireless network without help

    2 month old laptop dv7-3162 and it has now stopped working in terms of connection to the Internet wireless. The other computers in the House connect correctly (wireless). So I know for a fact that this isn't a thing of router (my router AND the motem is an all in one device). Now, IV ' e updated my drivers for the latest drivers (only the atheros adapter wireless if it matters) and nothing to fixxed the question. He sees wireless networks, that he just does not connect to them. IV ' e reset and power cycled motem/router several times without success. A ran a windows update and several reboots.

    Thanks in advance

    He worked, all you have to do is go in the device management and wireless network card driver, disable, restart, let it reinstall, and it should work. It did in my case.

  • Windows does not connect to my WPA2-PSK network, please help.

    Windows 7 will not connect to my network WPA2-PSK with AES key pairs. The adapter supports the Wireless N mode and the router is configured for that. I removed all of the antivirus solutions, nothing is done and even made some antivirus scans and applied all the updates of windows available. I tried several cards. And I have done all the resets and reset known to man for the cached windows kernel network. The router has no problem with any other device in my house and I have run diagnostics on the router, its status is OK. I played with the IP address and DNS resolution but no progress neither. Can someone help me please? The machine is a HP Pavilion P6550Z.

    I just mingled with the Tx and Rx buffers and activated energy saving MIMO, now it connects. I'll post back here if it stops working, thank you all for your help!

  • Creating a network - please help

    Hello world

    I am trying to create a network of laboratory where I install on 1st vm machine - Windows 2008 R2. This vm machine will have a static ip address, that I posted on my home network. This server is also the DC and the DHCP server.

    Then, I installed 3 vm machines with windows 7.

    My question is how to make the server to access the internet is the bridge with the network card host but at the same time providing DHCP for the other 3 machines to winodws 7.

    Config:

    DC: 192.168.0.50

    DG: 192.168.0.1 (home Modem is DG)

    The DHCP scope: 192.168.0.51 - 60

    I want to add 3 Windows 7 machines to the domain.

    I would be grateful someone help with this or if you could point me in the right direction, where it is documented not confusedly. I'm new on this.

    Thank you

    Rather than fill the machines, simply put your DC and the Windows machine to the VMnet even and your DC, put the IP of the Modem home gateway

  • Qosmio G20 on Vista is not displayed wireless network

    Hello

    I just finished installing Vista EU according to http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=20494
    And I downloaded the driver for wireless network card, but still I can't find my wireless network. For a short period of time neighboring network appeared, but then he disappeared (probably because of the weak signal). But my network is shown even when the router is half a meter by far. How can I detect the wireless network. Help, please. :(

    Is it is important the Siemens Gigaset SE555 WLAN dsl router, but I doubt that it is the router problem coz my other laptop a few meters away is a very good signal.

    your wireless driver is installed correctly? have you made changes to the wireless configuration? What type of encryption your wireless card supports?

    Malditazo

  • HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

    Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

    Hello @fairgame,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I understand that you have a problem with the WiFi and wanted to help you!

    First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

    First of all, we have a step by step guide to guide you through the process of diagnosis here:

    HP PC - troubleshooting Internet and wireless network

    A second option is to try the following steps:
    Powercycle the network:
    1. turn off your laptop.
    2. unplug the power to your router.
    3. disconnect the power to your modem.
    4. wait at least 45 seconds.
    5 reconnect the modem and wait for it to come back online.
    6 plug in the router and wait for it to come back online.
    7. turn on your laptop and test your connection.

    Turn off the power to the adapter:
    1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
    2. expand the network adapters.
    3. right click on the Ethernet adapter / wireless, and then click Properties.
    4. click on the power management tab.
    5 remove the check mark next to allow the computer to turn off this device to save power.
    6. click on OK.
    7 test cycle.

    Reset the TCP/IP settings on your PC:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
    4 restart your PC and test.

    It can also help to reset the winsock catalog:
    1. go to your start screen/menu and type CMD.
    2. right-click on the command prompt icon and select run as administrator.
    3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
    4 restart your PC and test.

    Reinstall the NIC drivers:
    1. download the drivers from here , but do not run them again.
    2. go to your Start menu/screen and type Device Manager.
    3. expand network adapters.
    4. right click on the wireless adapter and choose uninstall.
    5 install the drivers downloaded in step 1.
    6. restart your PC and test.

    Test an ethernet connection:
    Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

    Test another connection:
    Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

    If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • How to remove or delete network domestic (not homegroup) so that I can access and connect to our wireless network.

    I have Windows 7 and it is connected to the network via a home network (not homegroup - that is not disconnected).

    We have a set up wireless network and the other computer, tv, xbox, cell phones, tablet, that all were connected successfully to our home wi - fi configuration. My Dell windows 7 is always connected through an old home network of a previous wired router. How in the world I remove, delete or otherwise change the settings so that I can connect to the wireless network. My computer does not even list or recognize the wireless network. Help, please. I looked and looked and can't find anything to help me.

    My computer does not even list or recognize the wireless network.

    If your machine does not list the wireless networks, this is caused by one of the following:

    • There are no active of nearby wireless networks.
    • The machine doesn't have a wireless adapter.
    • The wireless adapter is disabled.
    • The wireless adapter is disabled. Most laptops have a switch or some facility keyboard to turn off the wireless network card.
  • mg7720 wireless network name change

    How can I change the name of the printer wireless?

    Hi Rjw1952,

    To connect your PIXMA MG7720 to your wireless network, please follow these steps:

    1. press the button on your MG7720 PIXMA HOME.

    2. slide the screen, and then select LAN settings.

    3. tap on settings WLAN.

    4. click on installation Standard.

    5. a list of detected access points appears.  Select your wireless network.

    6. Enter your wireless network password, and then click OK.

    Your PIXMA MG7720 will now be connected to your network.

    If you continue to have difficulties, please contact our support group by using the following link:

    http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  • HP B209a cannot find the wireless network

    I'm running into a problem with my B209a find a wireless network.  I'm not well versed in wireless/network please bare with me.   I have an iMac with OS X 10.8.2.  Recently, I upgraded my router to an Airport Extreme.  My Mac can see the printer correctly, however, the printer cannot now see the network.  Airport utility, I see all our appliances listed under wireless clients and an IP address without a name (printer?).  Doesn't look like not to add manually wireless clients is no longer an option.

    The wireless is configured with WPA/WPA2 Personal Security.  The radio is set to 802. 11A / n - 802.11b/g/n (automatic).  Anyone have any ideas on how to solve this problem?  Thank you.

    1. Printer, restore the configuration of the network printer.
    2. Turn on the radio to the printer.
    3. From your Mac, connect to the network printer called hpsetup.
    4. Open Safari and select Bookmarks-> Show all bookmarks.
    5. Select Hello on the left.  Your printer should appear in the main window of Safari.
    6. Double-click the printer.  The printer's internal web page should appear.
    7. The Green Network on the printer web page tab.
    8. Select Wireless (802.11) on the left
    9. Press start the wizard and follow the prompts to connect the printer to the network.

    This should get back you on your feet.

  • Unable to connect to the wireless network adapter... Help, please!

    Hello
     
    I recently reinstalled Windows Vista on my Dell Studio 1535. I put everything back on and I went to connect to my internet connection, and in the box "Connect to a network", he says "Windows cannot find any network." So I clicked on diagnose why Windows cannot find any network, and he tells me "this computer does not have an installed and configured wireless network card.

    I don't know what to do. I have a cd you put in after having reinstalled Vista for my laptop and it say the PILOTS AND of UTILITIES. When I set and run the cd, it brings up a bunch of stuff I don't know what to do.

    Please I really need help with that. If you need to know any information on the CD or my computer, I will gladly answer.

    Thank you.

    Install the drivers on the CD, or contact Dell as to what you need to install from the CD:

    http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

    GOLD:

    http://support.Dell.com/support/downloads/index.aspx

    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

    See you soon.

    Mick Murphy - Microsoft partner

  • Please help wifi does not not ACER aspire 4710g (wireless network card problem)

    Please help me

    C:\Users\ali>ipconfig/all

    Windows IP configuration

    Name of the host...:-PC

    Primary Dns suffix...:

    Node... type: hybrid

    Active... IP routing: No.

    Active... proxy WINS: No.

    Wireless Network Connection 3 Wireless LAN adapter:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Microsoft Virtual WiFi Miniport adapt #.

    2

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Wireless network connection Wireless LAN adapter:

    The connection-specific DNS suffix. :

    ... Description: Network adapter on Broadcom 802.11 g

    Physical address.... : 00-1F-3A-1B-2D-F5

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Address IPv6 local link...: b 3 fe80::4e8:4: 4d49:acc2% 16 (Preferred)

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    ... Subnet mask: 255.255.0.0.

    ... Default gateway. :

    DHCPv6 IOOKING...: 318775098

    DHCPv6 DUID customer...: 00-01-00-01-1B-50-87-0D-00-1D-72-1B-B7-7D

    DNS servers: fec0:0:0:ffff:1 1%

    FEC0:0:0:FFFF:2 1%

    FEC0:0:0:FFFF:3 1%

    NetBIOS over TCP/IP...: enabled

    Ethernet connection to the Local network card:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Broadcom NetLink (TM) gigabit Ethernet

    Physical address.... : 00-1D-72-1B-B7-7D

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 11:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Adapter Anchorfree VPN #2 HSS

    Physical address.... : 00-FF-03-C6-CD-54

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    Adapter Ethernet Local Area Connection * 9:

    State of the media...: Media disconnected

    The connection-specific DNS suffix. :

    ... Description: Card Anchorfree VPN HSS

    Physical address.... : 00-FF-EF-4A-57-34

    DHCP active...: Yes

    Autoconfiguration enabled...: Yes

    C:\Users\ali >

    AWI

    There is a problem with the wifi adapter "wireless network connection Wireless LAN adapter:" the driver is corrupted or it is incorrectly configured.

    I would start by removing the current driver of sifi and install the latest driver available.

    The IP address for the above connection is

    Autoconfiguration IPv4 address. . : 169.254.172.194 (Preferred)

    This state it does not connect with the router.  Alternatively, you can try to restart the computer and the router at the same time.

  • HELP PLEASE WITH MY WIRELESS NETWORK CARD CONSTANTLY HAVE TO BE SET

    I have an Acer Aspire 5552-3691 with Atheros AR5B97 wireless adapter. It shows that I have an internet connection, but I have to constantly run network diagnostics it resets then the wireless network adapter and which solves the problem. However, the fix is only short it can last 2 minutes or if I'm lucky 15 but nevertheless it continues to occur. Help, please

    Hello

    Thanks for posting your question in the Microsoft Community forum.

    Refer to this article and let us know the status.

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    Thank you.

Maybe you are looking for

  • Improve the speed of my Mac

    I work on a Mac Pro (2009) with a 2.93 GHz Quad - Core Processor and I noticed that my Mac seems to be much slower to perform tasks when that I start last year. I have 8 GB of memory, an NVIDIA GeForce 521 MB graphics card, my HD has a capacity of 64

  • Sony Xperia M4 Aqua and STM10

    Hello the STM10 microphone works with the Xperia M4? I mean full compatibility, it's done the M4 have an audio jack 5-pole? Thank you very much GIO

  • Unable to connect after standby HP 7510

    I use a HP7510. It is connected via wifi using WPA2 encryption. So far, I am able to connect to my printer, but after awhile, I'm more able to print (especially after that the computer or the printer goes into sleep mode). I'm only able to print agai

  • BlackBerry smartphones can not get Brickbreaker on my 8800!

    My father gave me his old phone to work, an 8800.  I wiped it and took off the BES from www.removeblackberrypolicy.com. Everything worked great... except that I don't have Brickbreaker.  Under Options > Advanced Options > Applications, brickbreaker i

  • BlackBerry Smartphone Sync Windows Mail calendar

    Hello I am new to these forums and bought my first blackberry and I need help! I am on Windows Vista and use Windows Mail for my mail, calendar and contacts. Using BlackBerry desktop manager 5.0.1 version I was able to sync contacts from my blackberr