Wireless on my Compaq laptop problem

Similar Questions

• battery for Compaq laptop problem

  I just upgraded to windows 8 to 8.1 on a compaq CQ58 laptop. I've also updated to HP support assistant.

  On startup, I get a message telling me that the battery must be replaced because its capacity is very low...

  I have read suggestions on checking and recalibrating the battery.

  Pressing f2 at startup, the diagnostic test battery process freezes at 6% complete and will not continue the test.

  On the use of a battery HP support tool, now it shows primary battery 100% available, but then stops. If the laptop is plugged in, it shows 100% AC power. ITI comes back and says "battery test has stopped working - a problemcaused the program to stop working correctly.

  The proposed manual calibration and test method does not work either

  The warranty of 12 months Mobile has expired only on 01/12/14, so I'm not very happy about having to replace the battery, especially if it could be the unit of charge, the battery or a problem with the update. Any suggestions on how to be sure what is the real problem.

  The machine works perfectly on the power grid.

  Hello tvmalba,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  From the looks of it, you've done the required troubleshooting that it would seem the problem you describe seems to be a physical problem, and I think it would be best if you contacted technical support HP for repair options.

  United States supports Contact link options HP products purchased in the United States.

  Outside WE support link to connect with options for HP products purchased outside the United States.

  I want to thank you for display on the HP Forums. Have a great day!

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• 2542 printer all-in-one: print wireless from my Acer laptop problem

  My printer is about 18 months old. Originally, it worked perfectly when installed everything first, a year ago, he stopped wireless printing. HP support person came on my laptop on the internet and took 45 minutes to make it work again. I didn't do anything, and now a year he stopped again to print wireless.

  My Acer laptop will print with a USB cable

  It will also communicate wirelessly with the levels of ink printer control etc.

  I can print E wireless from my Samsung Tablet and Samsung mobile.

  When I try to print wireless I get error message printer.

  I wouldn't change a thing, but I don't know about microsoft or Norton auto updates

  If you have recently installed Norton Security or received a new patch to update/update for Norton Security, you may need to reconfigure the settings of network devices later.

  Harry

  Norton support

• HP Compaq laptop: windows update problems

  Hello

  Could someone help please, for the last few weeks where are updates of Windows security and I think that all is well I keep getting messages flashing up to say that updates could not be completed. This seems to be only on some of them, I'm not very tech savvy and have no idea how to do to fix this, it would be good if someone could tell me in simple terms how to overcome this problem.

  Thanks in advance

  John G

  Hi @Johnymac,

  Thank you for your response.

  What is your specific model of HP Compaq laptop?

  There is a link in my previous post to help you find this information.

  If you have a firewall (firewall of Windows example) make sure that Windows update is on the white list. You can also try disabling the firewall and retry the Windows Update to see if that helps.  If it do not forget to reactivate it later.

  Have you checked against viruses and malware?

  Microsoft offers also get help Windows 10.

  Microsoft Corporation / Customer Support

  1-800-642-7676

  Microsoft Support contact us

  Please keep me updated.

• Computer HP Compaq laptop and a wireless model 1359 mouse. I need how to do to activate the mouse.

  I need the place where Microsoft go to activate my wireless mouse mouse model 1359.  HP Compaq laptop.

  You are simply wanting to install?

  Install the driver on the cd that comes with it. Just follow the directions

  Install the batteries in the mouse.

  Connect the receiver to your computer.

  You are finished.

• I have problems wireless on my Acer laptop which has Windows Vista. I am able to connect to my school of university network and used to connect to my home network.

  original title: Wireless on the Fritz

  I have problems wireless on my Acer laptop which has Windows Vista.  I am able to connect to my school of university network and used to connect to my home network (both are networks limited requiring a password or log in).  However, last week my computer stopped connecting to my home network (no one else has this problem with the home network).  I tried to fix the problem, but my computer says that "Wireless association failed because Windows did not receive response from the access point or wireless router."  That said also thatthe connection "(my wireless network)" has been cancelled.  This is perhaps due to a timeout or user action. »

  The only different thing I did last week was click option at my University 'connect long-term' instead of 'connect short term' to their wireless network.  Maybe who has messed up my settings?  That's what my University said of his record long term: "students, faculty and staff also have an option to easily record their computer (or other wireless devices), so that it is not necessary to authenticate each day they connect from the network wireless campus, to resources outside the University.»  However, these settings are saved on their network (I can access it online from another computer), so I think it is unlikely that he messed up my settings.

  I don't really know what the problem is.  Any ideas as to what I can do?  I don't want to reset my computer everything.

  Thank you!

  Hello

  You can view these methods:

  Method 1:

  I suggest you to disable any program of security on your computer and check if it solves the problem.

  After reviewing the question you must reactivate the security on your computer program.
  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.
  Method 2:
  I suggest also allows you to check in SafeMode with network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
  Method 3:
  I also suggest you to check the settings of the router firewall.

• Compaq Presario - problem connecting to Wifi

  I have a compaq presario, the name of the product "Presario C700" and the p/n' FE934UA #ABA. "The operating system is Windows Vista. I have Comcast internet and the router I am using is Netgear. Recently, I moved into a new place and will have problems connecting to Wifi at home. I've had this laptop for several years and have been able to connect to some wifis in the past, but there were moments where I was not able to connect to the wifi in some public places. I am able to connect to the wifi on my phone and another laptop, but not this one. I tried to reset the router and many other measures, but nothing seems to solve the problem. Whenever I try to connect, it says that the signal is excellent, but it fails to identify the network and said that "the router is unavailable. I already called my router company, but they were not able to solve the problem. The only way I can connect to the internet using an ethernet cable.

  I would really appreciate help on how to connect to wifi. Thanks in advance!

  Hello:

  What model of wireless network card your laptop there?

  If it uses an Atheros AR5007 wireless network card, see if installing this driver solves the problem.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1

• Hub BT 1800 HG wireless and card PC Laptop/1060

  Hello

  I have a portable S2410-304 Toshiba without a Wireless LAN mini. I connected the laptop to the BT Wireless Hub via the Ethernet connection without no problems whatsover, and the broadband connection is great. However, I tried to get the BT Voyager 1060 portable Wireless PC Card to work with no joy either.

  The laptop has Windows XP SP2 and wireless broadband is via the supplied software, rather than through Windows XP. The laptop recognizes the card in the PCI slot, but for some reason any does not have a signal coming through the router.

  I have another laptop and I have the Ethernet connection and wireless LAN works without any problem. I've uninstalled and reinstalled the software, swapped the PCI slots and (as I have two cards) even tried the other card (and they both work in my notebook to another). I contacted BT and they told me to try uninstalling Norton and make sure that the Windows Firewall has been turned off and re - install. Still no joy.

  Does anyone have any ideas as to why the router and the map don't communicate wireless, and yet they're fine an Ethernet cable?

  Thank you

  Steve

  [Edited by: admin]

  Hi Lim

  If the card is recognized and installed properly there must be a problem with BT card settings and configuration of the card. The only thing I can recommend is to check all the settings, especially in the Center BT wireless.

  Good bye

• HP 15-AC044TU: how to enable the wifi/connection wireless network in my laptop HP 15-AC044TU win-7 64-bit

  I can't activate the network wifi/wireless connection on my laptop HP 15 - AC044TU win-7 64-bit. I found no adapters wireless network / wifi drivers on the hp site. where can I find it? the key that is used to toggle the wifi?

  Please solve my problem FSA.

  Thank you.

  Hello:

  You need these drivers for W7 wireless and bluetooth for your model...

  Network controller (wireless card):

  FTP://FTP.HP.com/pub/SoftPaq/sp71501-72000/sp71528 .exe

  Bluetooth:

  This package contains the Broadcom bluetooth driver and software for the laptop models running a supported operating system. Broadcom Bluetooth 4.0 driver is required to activate the bluetooth 4.0 Broadcom devices and is compatible with Broadcom bluetooth 3.0 and earlier versions.

  File name: sp71440.exe

• Why I can't find my network wireless on my XP laptop but can connect to my Vista laptop?

  So here's my situation.

  I have a small laptop with Windows Vista Home Premium 64-bit
  I also have a laptop with Windows XP Service Pack 3 on it
  We just moved into a new House.  In our old House we had DSL with wireless router and two laptops where able to see and connect to the network.
  In our new home even company and probably even router if I'm not mistaken my computer Windows Vista laptop sees and connects to the wireless network.
  However, the XP laptop sees about 10 networks wirelss in screen 2 wireless network connection, but not ours.
  Here's what I've tried so far:
  -Tried to restart the router
  -Tried to restart the laptop
  -Tried to update the drivers for the wifi
  -Tried manually to create a wifi network of same name and enter the key
  I'm really ideas, especially since he could see and connect the network in the old House 2 days ago.   So it comes even to see my wifi network listed may not even try to move on the part of tent to connect and enter the key.
  Any help would be much appreciated and if someone needs more information let me know.
  JF

  Hello

  I suggest you to follow the steps below and check if it helps.

  Method 1: Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

  Method 2: How to troubleshoot wireless network connections in Windows XP: http://support.microsoft.com/kb/870702

  (Valid for Windows XP service pack 3)

  Hope this information is useful.

• Compaq laptop and Vista disaster

  I have a Compaq laptop (send me children) who had Windows Vista on it when we bought it. I dropped the computer recently and it is now fixed and asks me to reinstall Vista. I don't have Vista. What will happen to all my photos if I install Windows 98? Other options available?

  Hello

  If you could install 98 hard drive should be wiped clean of any

  It would seem that you have a hardware problem

  as to how much of the material we can not help you

  If you is not damaged the hard drive and it is still running, you can try these 2 options

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive

• Wireless connection unavailable on laptop, but shows all ok on pc and router

  I was at Midway through a conversation today on msn when my wireless connection (on my laptop) disappeared. I checked my pc and everything seems ok, here, my netgear router shows that everything is fine. When I click on 'Find a wireless network' his party! I can access the net very well by plugging it but as soon as I go wireless, I still lost.

  Tried to connect manually - says network with that name already there
  Tried to re start all
  All cables checked

  It's a laptop Toshiba L300
  Virgin cable broadband
  Router NETGEAR Wireless

  everything works fine as long as I'm using the cables.

  I only had my laptop and router wireless for a month.

  Please any other ideas what to do, I really need to be wireless for work as soon as possible

  Hello severina_falls,

  Thanks for posting on the Microsoft answers Community Forum.

  I have some suggestions for you to see if we can provide you with your wireless connection.

  (1) check that the WiFi switch is on on the front panel of your laptop. It is a quick check
  (2) Recycle the router wireless on and outside. Wait at least one minute, then turn it back on. Retest with your wireless network.
  (3) are getting you the error messages in the case where connects to deal with your wireless connection?
  To join the event logs: click on the Start button, right-click computer, click on manage.
  If you receive a notification of user account control , simply click on continue.
  Double-click Event Viewer. Study summary of the the event logs for errors dealing with wireless.
  (4) use System Restore to get your iIf wireless upward and running, you have a System Restore Point that was before starting the problem with your wireless network.
  Use the following KB to get the procedure on the system restore.
  936212 KB - how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  If please post again and let us know if it helped to solve your problem or if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compaq laptop frozen by disconnecting mode

  My computer compaq laptop froze in disconnecting mode.  I learned to restart to put some updates and now it is frozen.  I tried ctrl alt del, but nothing helped.  Can we helpl

  Hi Billybobs,

  • You did it all changes before this issue started?

  You can try turning off the computer completely now the power button on the computer for 10 seconds. This will completely close the computer.  After the computer turns off completely, try to restart the computer and check if it starts very well and if you have access to the desktop.

  Once you are able to boot to the desktop, try to disconnect or turn off the computer again and check if you still face the same problem and after return the result.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• wireless network with windows vista problems

  My laptop has windows vista edition family service pack 1. It does not connect to my router thomson TG585 v7 gateway. Ive tried everything nothing helped. I've heard this may be a compatibility problem with windows vista and there may be an available for this patch. Is this correct and how I could get it?

  You have a power switch Wireless switch on your laptop?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner