Wireless printer can not connect

Similar Questions

• wireless printer is not connected to the printer

  I have a HP deskjet 3050 J610.  I recently changed the SSID of the wireless and now I can't print by saying that it is not connected.  I tried to go to the printer and press setup, but the network does take one to match the SSID name.  the wireless network test report says the wireless is on and working but theSSID found name failed.  There are 3 detected networks.

  You don't need the CD, just read this web page and click on each tab to see what's there.

• HP Photosmart C309a - but wireless network can not connect

  I have a new printer C309a, but it does not connect to my wireless network.  I have read all the posts and tried everything I can think of (I'm not expert network but reasonably competent), but nothing helped.

  I use a router NetGear DG834N which works very well provide a wireless network for an iMac, 2 iPhone and an iPad. There is also a PC running that Vista wired to the router.

  When I try to connect the printer to the wireless network, it finds the network OK but when I put the password it fails to connect.  Test report says wireless MAC address filtering can be enabled.  But... MAC filtering is disabled on the router.  Wireless isolation is disabled on the router.

  Tried to get this happening for a few weeks now.  I want to emphasize that I managed to print a test page the first time it has been installed (so there was a wireless connection then).  And I got a wireless connection briefly a few days.

  Quite perplexed and not a little frustrated.  Can anyone help please?

  I think it's a question of wireless mode.  Try the other settings from the drop-down menu where it says 270 Mbit/s.

• Wireless printer is not connecting to the network of "n". How to connect?

  I have a wireless HP 6980 printer.  Due to interference - our router went to pure "n" for speed.  Connects the wireless printer is no longer through the router.  How to get to the wireless printer or what I have to to get ethernet.  Thanks for the tips.

  Hello

  the printer only supports 802.11n connection...

  http://support.HP.com/us-en/document/c00569571

  Enable mixed mode or connect via ethernet cable. I would use earplugs if necessary...

• HP Premium 8600 - using OSX 10.9.4 with wireless and don't keep saying the printer is not connected

  Use the printer for a few months with no problems.  Now, out of the blue, I can't print.  Keeps telling me that "the printer is not connected" and "search for printer.  I see that the printer's system preferences.  So the printer is there. Why is this suddenly happening?

  If I disable wireless to the printer and then turn it back on, I can print maybe one or two times and then get the same message.

  What is the problem here?

  Hello

  Please, try unplugging your router from the power for 10 seconds, plug it back and leave 2 minutes to initialize.

  Then turn your printer off and turn it back on and allow it to reconnect.

  You can see any difference?

  If this isn't the case, please also restart the Mac and check for the difference.

  Shlomi

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• Problem with wireless printing: can print test page, but not documents

  PhotoSmart Plus B210a with MacBook Pro running 10.7.4

  I can print a test page, but not a document.  The message from the print queue is "the printer is not connected.

  I started today be able to print from my computer, but not a second computer.

  I followed the advice of HP support including an update of the LION driver download.

  I deleted and added the printer on both computers.

  Now I can't print from my computer.

  Furthermore, why did I have to find in an HP forum on the new drivers.  Should not the printer HP offer update me the information?

  What is the download you have installed? : http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• I have a laptop with Windows XP. After getting a virus, I scanned with AVG and removed the threat. After re-booting, I can not connect to wireless internet.

  I have a laptop with Windows XP.  After getting a virus, I scanned with AVG and removed the threat.  After re-booting, I can not connect to wireless internet.  The icon shows "acquiring network address".  I connected the router directly on laptop computer connected to the wireless network and still unable to connect.  I tried to restore the system as well, but the message says "unable to restore the system, no changes were made.  Help?

  original title: acquisition of network address

  Hello, Steve.

  Try this link below on how to reset IE and let me know if it helps.
  http://support.Microsoft.com/kb/923737

• new router and can not connect wireless

  Installed a new router that has changed my a WEP to a WPA2 security. I connected to the printer (7410) via ethernet cable and changed the security settings, but the printer will not connect to my router. I'm printing directly connected ethernet cable on the router. When I try to use the interface of the printer to cinnect to the router the only option that appears is WEP.

  Any ideas?

  Thanks it worked perfectly for me!  Sorry, your options appear on the screen for you, but they did it for me.

  Just make sure you change your new router wireless to the first WAP and it should work fine.  No need to reinstall any software or drivers as some previous posts said.

  Go to: network, Wireless Setup Assistant, (I had to scroll down to the second page to find where to enter my new network name) and enter the new network name configured on the router.  I changed my network name of the WAP2 name that I had originally put in place, so it was easier to distinguish that one has on the WAP.  Enter your WAP password and you should be good to go.

  I use a wireless router Netgear on a Windows XP operating system.

• HP Officejet 6600. Phone smart Samsung SIII. I can not connect my cell phone to my printer.

  I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop. Any suggestions on this problem as well, please?

  I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

  SwampDoggie wrote:

  I can not connect my mobile phone Samsung SIII (new) to my Officejet 6600. The printer is connected to my home network. I use it with my laptop. In addition, I have to disable my firewall to use my printer with my laptop.

  You must configure your firewall correctly.

  I use a Samsung SIII (new) cell phone. He asks the printer password. Where can I find that?

  What exactly is the error message?  Make sure that it does not ask your network SSID password?

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• Printer (8500) not connected (wireless) as I am updating to the mountain

  I have updated to OS x Lion mountain last week and were unable to make the printer work since then.  The printer works perfectly on Snow Leopard, but now whenever I try and print a document I tells me that the printer is not connected.  I tried a USB cable but have had the same results.  My computer is an iMac running OSX version 10.8  My printer is an Officejet Pro 8500A910a.  Thanks for your help.   SamO66

  Download and install this: http://support.apple.com/kb/DL907

  Reset the printing system:

  -Go to System Preferences > print & Scan
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Want 4500: I get a message saying that the "the printer is not connected.

  I just bought a HP Envy 4500 all in one printer.

  I can't print to it without having to restart it every time.

  I get a message saying that the "the printer is not connected.

  I can access the built-in web server, so I am sure that it is connected.

  It seems that he is going to sleep but cannot be awoken by activity.

  I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

  The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

  I uninstalled and reinstalled the printer.

  The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

  If I try to scan I get an error-9923

  Hi @jpkeates,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

  Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

  Make sure that the multicast is supported

  If you use a wireless network, make sure that muticasting is supported and enabled on your router.

  If the new connection is working, you know that the printing problem is tied to the computer.

  If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

  Disable IPv6 (network connection)

  Disable IPv6 on the printer to make sure IPv4 is used on your network.

  If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

  If your printer does not display, use the built-in web server (EWS) to disable IPv6.

  From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

  NOTE:

  If the Web page appears empty, try another Internet browser.

  Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

  Select enable IPv4 only (or similar).

  Figure: Configuration example IPv4 using an integrated Web server

  

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide and help the steps!

• Printer will not connect

  Time Warner gave me a new modem, and now I can not connect my printer Brother wireless network. The router is connected to my destop and I can't connect it (IP 192.168.1.1) from the desktop. However, I can login to my devices (iPhone, iPad, computer laptop). If I enter the IP 192.168.0.1, it opens my cable modem.

  Brother says that I have to reset the printer network adapter. They told me to connect an ethernet cable from the printer to the router, get an IP address from the printer, open a browser, enter the IP address and press ENTER. I got a valid IP (192.168.1.6), but the Web management screen brother does not open. IE9 says it cannot display the page and Firefox Mozilla says it has expired. Brother, says that the printer works as it should. The problem is in the router.

  My printer gateway IP is 192.168.1.1.

  Is there a way to get the printer connected?

  Howard

  P.S. I am running Vista. Old computer and old router. Probably in time to get a new computer.

  Elaine,

  Thanks for your reply. I solved this. For some reason, my network does not recognize my printer on my desk. I have connected a USB cable from the desktop computer to the printer and print. My network recognizes my printer from my laptop. My printer print wireless from my laptop. My office is eight years old, probably has something to do with it.

  Howard

• Photosmart 6510 "the printer could not connect to the server.

  Hi all.

  Just try to find this sorted hope someone can help.

  I am able to print irelessly of all our devices with no problems at all.

  However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

  I use an Imac with airport wifi router.

  Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

  Thanks in advance.

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.