Wireless printer stops printing after 4 pages

Similar Questions

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Get the message "Unfortunately, emergency wireless alerts stopped." after restart

  Hello

  Emergency wireless alerts seems to have stopped working on my phone.

  Some time after a restart, and whenever I run emergency wireless alerts I get a message "Unfortunately, emergency wireless alerts stopped.". He used to work before, and then she started to happen after an upgrade of the operating system (I think)...

  

  No idea what happened?

  See you soon.

  Try to clear the data from the application under settings > Apps and see it it helps.

• Setting up Deskjet 6988 for wireless printing after a reset to the factory settings, using Mac OS 10.8

  Hi - How re - connect to my printer wirelessly after a reset to the factory settings? I use Mac OS 10.8. The network on the printer flashes, and on the Mac, it is listed as "not connected". And the page of report confirms that he has lost all of its data.

  Fortunately, I made a report page before resetting, so I think that I know all of the critical information, I need to come back here, but I can't figure out how to do this.

  I read the installation guide, who said to use an ethernet cable and the CD of HP, but I don't have the CD anymore.

  I tried an ethernet cable and entering the IP address of the printer, but which did not, perhaps because it has more this IP address.

  I tried the steps hereand downloaded the latest version of the HP update software software, but I don't see my printer. I went from my wifi to hpsetup network and then I could see and add a second new instance of my printer, but it did not help, because this second instance of the printer is not connected or the other.

  Interestingly, when I am connected to hpsetup, I can print.

  Can someone help me to re - connect this printer? I'll save the reason for reset for another post!

  Thank you very much!

  FIXED! Sunshyne2005, thanks a lot to direct me to the solution!

  Here's what worked:

  1. Connect to hdsetup
  2. Press the report Page button on the printer (the one with the box)
  3. Continue with step 3 of the Sunshyne2005: open a browser and enter the IP address of hdsetup.
  4. Look around for the wireless configuration wizard (sorry, I can't access is no longer hdsetup, and I just don't remember where it is)
  5. Enter the SSID (name) of the wireless network and the password
  6. Note: You will see a button to finish, but it has no effect. At this point, the printer is successfully added to the wireless network and access the hdsetup disappears. Therefore, the wizard will no longer work, but the important thing is that the printer is connected. : )

  Thanks again, Sunshyne2005!

• Unable to connect to my wireless printer after changing my internet router

  I recently had an upgrade of the router and the printer now appears offline. The new router has a different password but I don't know how to change the settings of the printer so that the printer to access the new network.

  Please notify

  Hello

  Please follow the steps below.

  (1) reset default networks by selecting settings > wireless Menu > restore defaults

  (2) turning on wireless on the Printer Setup Menu > Wirless Menu > Wireless > on

  (3) If Windows click Start > HP > printer name > Setup printer > new window opens, select Connect a new printer and follow the instructions on the screen

• Satellite L300-1BW - wireless connection stops working after 10-15 minutes

  Hey!

  Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

  When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

  I know full well it's not my Netgear because it work fine on all the other my computer.

  IM wondering if anyone could possibally help me. I would be grateful anyhelp.

  Thank you.

  Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

  Hello!

  If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

  In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

  Good bye

• Re: Wireless suddenly stops working after traveling abroad

  Toshiba Satellite L402, WXP

  Before you travel my laptop wireless works perfectly, after traveling abroad, I tried to connect to my network wireless at home, but I can't see any wireless network.

  I have two computers at home, PC and laptop, the PC has no any problem connecting to the wireless and can see all available wireless network, while my laptop has his red X mark on its icon on the quick launch wireless and can not display any network without wire around, I have re installed the driver but still it won't work , I tried to connect my psp and portable to my wireless router just to check if the connection to the router is limited, but I was able to connect to it.

  Any idea on what I need to check or do? Thank you!

  Hi guel27,

  -have you checked if the wlan switch is in the correct position?
  -If the position is ok, check the hardware by using Device Manager. No red or yellow cross on the wlan adapter? Okay, you guys:
  -check if the network connection is not disabled in the overview of network connections
  -(droite-klick sur réseau/wlan-icon dans la systemtray et vérifiez votre connexion si elle est désactivée.)
  seing any Red Cross on your wlan conn? Okay, you guys:
  -Perhaps you have installed a wireless Internet favorite, at least you could:
  -delete all favorite connections and choose dhcp instead of a static ip address

  BTW: Be sure to use the driver for your nic corect!

• just wireless printer to print a test page but does not print anything

  just installed my advent AWP10 printer all in one wireless, print a test page, and then I went to print an e-mail and nothing, when I checked "whats impression" it says 0. Did a diagnosis on her, said she was not shared with home networks, corrected this, but still nothing print or the print stack, is it OK to plug a usb cable to the rear, although its placement in the wireless? Maybe I could set up the usb cable, but also wireless, I don't know?

  Hello

  Thanks for posting the request in the Microsoft Community.

  It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  Method 2:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 3:

  I would also refer to the links to set up a printer:

  Install a printer

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer

  Install a printer on a home network

  http://Windows.Microsoft.com/en-in/Windows7/install-a-printer-on-a-home-network

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  If the problem is not resolved, please provide more information to help you best.

  Thank you.

• HP Envy 5530 wireless printing

  I recently bought the HP Envy 5530 for wireless printing after a terrible experience with an Epson wireless printer. Set up the printer on my desktop running Windows 7. The printer is connected to the desktop computer with a direct line-in (not of wifi capable office) and the printer is connected to my wireless network by connecting it to the router (Apple Airport Extreme). The printer connects, it appears so when I check the router (via Apple Airport Utility on my Macbook Pro) as well as tests of what the printer does it for wireless connectivity.

  Despite be connected to the wireless network, the printer does not register anything. I can't print from my iPhone or my Macbook Pro. The printer will work with the line-in directly on the desktop. I was wondering if what he touched, I deleted the line hoping wifi printing would be available. Not the case. The iPhone and Macbook both "send" the document to print, but nothing ever happens. All of the tools provided by HP diagnostic show that everything works fine. The router is about 10 feet to the printer and the printer indicates a high signal strength.

  If anyone has any advice or suggestions, I would be very happy.

  Hello @teedeewhy,

  Thank you for visiting the Forums from the HP Support! I see that you're running into some problems when trying to print on your HP Envy 5530 from your iPhone or your MacBook, it shows as connected but do not print. You have not the 5530 connected with a USB to your computer Windows and you have no problems.

  You should not have problems with both wireless and USB connection. There seems to be some sort of communication wireless with Mac problem, so let's go and start troubleshooting it:

  First I want to make sure that the printer is properly connected to the router Airport:

  Install your HP printer on a network with Apple AirPort

  Follow the steps and I would like to know if you are now able to print to your HP Envy 5530, I'll watch for your reply.

• General error on the display of CV - model # E910A wireless printer

  When printing, after 2 pages have been printed, I get a general error as follows:

  "There is a problem with the printer

  See the 0x610000f6 printer documentation. "

  I was wondering if anyone has had this problem & what to do to get rid of the message?

  Please notify

  Thank you

  Hi Hockey1,

  Welcome to the HP Forums.

  I see that you have a problem with the error code "0x610000f6".

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  "I have also found a document that addresses 'traffic Jam' or ' 0X610000F6" message for HP Officejet 7500 (E910a and E910c) a large Format e-all-in-one printers.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• DeskJet 930c: avoid the aliignment page after each page

  Hello, since I changed the black ink cartridge the printer prints an alignment with full black rectangles header page after each page I need to print. Is there a way to stop this behavior unconditionally

  Hi @guy_c,

  Welcome to the Forums of HP Support! I read your post and see that the alignment is printing after each page, after changing the cartridge. I will do my best to help you with this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  This problem occurs for one or two reasons, a problem of power, recharged cartridges or dirty contacts.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Reinstall the cartridges.

  I have provided a document for the cleaning of the cartridge and printer contacts, to see if that can help in this situation. Supplies HP inkjet - printing cartridge errors.

  You use genuine HP cartridges?

  If the problem persists, please Contact the HP Support for help. Check the model number and the form to receive a file number for faster assistance.

  Please let me know the results. Thank you.

  

• How can I stop the printer to print an information page after each print job

  Original title: print

  How can I stop the printer to print an information page after each print job

  Word 2007

  1. Click the Microsoft Office button, and then click Word Options.
  2. In the Print Options area, clear the print document properties check box, and then click OK.

  Word 2000, 2002 and 2003

  1. On the Tools menu, click Options, and then click the print tab.
  2. In the Include document box, clear the check box Of the Document properties , and then click OK.
  Source

• ENVY 5530: 5530 WANT wireless printer stop halfway through the page. Memory problem?

  Good afternoon:

  I m encouraged to print from an HP laptop pavilion15-N228SS wireless (WIFI) connection. Printer ENVY 5530 beggins to print but stop abruptly in the middle of the page, or just the printing of the page if there is an image.

  I think I have to give some more memory to the printer but if I Don t know how to do.

  Thank you very much.

  Take a look at this HP doc .

  You should also consider upgrading to 8.1

• How to stop the printer printing an extra page after that I have print something, with getting http: /h10141 on top

  How to stop the printer printing an extra page after that I have to print something, with mGET http: / h1014.www1.hp.com/pup/inkjet/updates/va/mamifests/b_bu_c_p00_348e88c

  Host: h10141.www1.hp.com

  Accept-encoding: identity; q = 1.0 *; q = 0

  User-Agent: HP - inkjet ink-WebUpdate - 1.1

  printer

• P3010: HP laserjet P3010 stops printing after a person especially prints a page

  Hi guys,.

  I'm in a space small office where we are 5 people. After a page prints a particular person, others may not print, and we need to restart the printer. It seems that the problem might be the specific person's computer since he just changed laptops and the same thing happens again. Any suggestions?

  Okie dokie, thank you for all the prompt answers that you have provided to me.

  Looking forward to hearing good news from your part.