Re: Wireless suddenly stops working after traveling abroad

Similar Questions

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• Service Windows wireless suddenly stopped working because of problem with the KeyIso service

  Description of the problem: Windows Wireless Services suddenly stopped working on my computer. What I have discovered so far that the problem is that the WLAN AutoConfig service does not work because of the failure of the function "KeyIso". The error message for the mentions "Error 126" KeyIso (the specified module could not be found). Any help to fix this would be appreciated. TDW

  Hello

  What is the antivirus installed on the computer program?

  KeyIso Description:

  The service provides insulation for private keys key processes and operations of such associated encryption required by the common criteria. The service stores and uses long term keys in a secure process in line with the requirements of the common criteria. It should normally be disabled, as otherwise, these cryptographic operations may fail.

  Looks like there could be a corruption with the wireless connection that you have added. You can perform the steps.

  Method 1:
  

  Try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.

  a. Click Start, type services.msc and press enter.
  b. Locate the Autoconfiguration WLAN service, double-click to open its Properties window.
  c as. under the general tab, change the startup type to Automatic and click on the Start button.
  d. click on apply, then ok.

  Method 2:

  To resolve this problem, try using the tool (SFC.exe) System File Checker. To do this, follow these steps:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3:

  You can uninstall and reinstall the network card and check.

  a. click Start, type Device Manager in the Start search box and press enter.
  b. locate the network adapters and expand the same.
  c. Select the Wireless connection, right click and choose Uninstall.
  d. restart the computer, if prompted.

  Drivers should settle automatically after the computer restarts.

  Now you can install the latest network card drivers and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Hope this information helps. Response with status so that we can help you.

• Satellite L300-1BW - wireless connection stops working after 10-15 minutes

  Hey!

  Just brought me a new laptop. Sound of the Toshiba Satellite L300-1BW. However, I've encountered a problem. I can connect to my home network wireless fine. However 10-15 minutes after browing internet, my just wireless connection will stop working.

  When does he say 'Local & Internet', 10-15 Minutes after that, I would say just "Local."

  I know full well it's not my Netgear because it work fine on all the other my computer.

  IM wondering if anyone could possibally help me. I would be grateful anyhelp.

  Thank you.

  Edit - seems work correctly with my laptop not charging. However when the power adapter is in charge of the laptop, it work for 10 minutes then stop.

  Hello!

  If you use Windows Vista, you must disable the WLAN energy saving function. You can find it in the Vista power management options. Check it!

  In addition, you should try to update the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Last but not least, I would recommend that you read hundreds of discussions on the problems of WIFI. You will find so much tips and tricks how to increase the WLAN functionality and troubleshooting.

  Good bye

• Canvio Basic 2 TB suddenly stopped working after Xbox update?

  While to say that the title of the hard drive has stopped working once an update has taken place on the Xbox one a few days ago.

  Now I tried it on a different Xbox one (didn't read), and also tried on a computer laptop windows 10 has yet no chance, at first he tried to install it but only got up then stopped, but even after having passed, still nothing, now its there if I go to device management (depending on whether its fine) but I can not even open the hard drive itself.

  I've had it for about 6 months maybe a little more, but still is it safe, placed just behind the xbox connected, never needed to move it.

  I hope someone can help or suggest something, but im now puzzled.

  Thanks in advance.

  I have the exact same problem mate

• LifeCam has suddenly stopped working after many years

  Original title: problem with my Microsoft Lifecam VX-6000

  Problem with my Microsoft LifeCam VX-6000.  I used my LifeCam several times when using Skype, but now it will not work.  I examined a large number of questions and answers that are listed in the support forum but nothing I found fixes my problem.  I am running Vista Home Premium on my HP #SR5050NX PC with a 32-bit operating system.  I used this webcam for many years without any problems, but now it will not work.  I reinstalled the current drivers on the Microsoft site and it appears in Device Manager that the drivers are correct for the LifeCam VX-6000 webcam.  When I try to open Microsoft LifeCam it locates my camera and the green light comes on but no picture.  When using Skype, he finds the camera LifeCam 6000 but gives me a message that it cannot use this device because it might already be in use by another application, but no other application works.  I have also a Cisco Webcam that I have in the past to select which camera I wanted to use while Skyping but he stopped working at the same time my LifeCam 6000 ceased.  I get the same message... This webcam cannot be used because it might already be in use.  The drivers are correct on this camera as well.  What can I do to fix this?

  Thanks, I appreciate your help and your support!

  datgrt

  Hello

  I suggest you to return these items and check if it helps:

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Don't troubleshoot bad or no video or problems to start the LifeCam software

  http://support.Microsoft.com/kb/933310

• Keyboard wireless suddenly stopped working - changed batteries still not helped

  Hello

  I have a craving for 20 all-in-one touch screen with a wireless keyboard that has been absolutely fantastic so far.  Suddenly, the wireless keyboard doesn't work while composing an email.  I replaced the batteries and check with a voltmeter to ensure 1.5V. There is an alkiline battery brand name.  I tried to re-boot the computer and pressing the blue connect button under keyboard.  The only keys that seem to work are the volume up/down and mute; the rest of the keyboard does not work.  Any idea?  I like the keyboard of the factory, so I hope this isn't a faulty keyboard.  After walking keyboards use a USB port.

  Thank you

  Thor

  Hello @Thor66,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless keyboard does not work and you are looking for help. I'm you provide a HP support document: wireless keyboard and mouse troubleshooting, who will guide you through the process of troubleshooting for your wireless keyboard.

  Now, if this does not work and you will need to replace the keyboard are not afraid you can replace the keyboard and the dongle without using another USB port as one that is can be replaced. I'd be happy to help you further and/or guide you through the dongle changing to a new wireless keyboard, but first of all, I encourage you to publish your product for your computer number. I'm a link a HP Support document below that will show you how to find the number for your product. So, if you could indicate what operating system you are using. And if your operating system 32-bit or 64-bit like this and the product number I can give you accurate information.

  How can I find my model number or product number?
  Operating system Windows am I running?
  Is the Version of Windows on my computer 32-bit or 64-bit?

  Will you please re-post with the information requested and I would be happy to provide assistance. Thanks for posting on the HP Forums. Have a great day!

• HP Pavilion G7: Laptop suddenly stopped working after applying an update

  So I was watching netflix and I got the warning that I had five minutes to shut down the computer or it would be closed himself so that he could catch up. I had done the things in closing and stop it by pressing the power button and in now supported.  Then, I turned on the computer laptop back and he started to update so I zoned out of it and watched something on my phone. While doing so I noticed some type of error message update and do not touch, it's because the last time it happened that just rebooted without the update. However instead he himself off and does not turn around. I tried to hit the buitton of power to reactivate and that did not work. I also tried the suggestions I found on this website to support such as take out the battery and unplug the power adapter to the power source.

  Hi @Spinto46,

  Thank you for the update.

  You have determined that the adapter works, it could be in the laptop power button.  The laptop will require a repair.  Please contact HP support for service options. They provide you with an estimate before performing any repairs.

  Contact HP to Contact HP Support assistance

  If you are not under warranty, a local repair shop should be able to provide an estimate also.

  If you want to consider replacing it yourself to see what is the matter, here's a link to the:

  HP Pavilion Notebook PC Maintenance and Service Guide of g7

  Please note Chapter 4, page 52 for replacement part number and removal and replacement instructions.

  For your convenience, here is a link to the:

  HP parts store

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  Also, by clicking on the ""Thumbs Up ' below is a great way to say thank you! "

• My time capsule 2 TB suddenly stopped working after 14 months, is possible to be to power Sunrise again? I tried a new power cord and the different points of sale.

  MY time capsule 2 TB is is no longer under tension after 14 months. I changed the power cord and made sure that the work of output and still no power. Is it possible to fix it?

  Yes. You can make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• Satellite - Wireless suddenly stopped working

  Hi, here is the situation:

  -model: Satellite 300 d-11V / Windows Vista
  -Wireless worked perfectly in the past and no update/changes made recently
  -Wireless turned on and orange
  -in home wireless works perfectly on other laptops + I can connect the faulty Toshiba but always ethernet cables
  -Classified Realtek wireless card working properly in Device Manager + says I have the latest player installed.
  - but windows is not find any wireless network more and cannot diagnose why.

  I ve tried to turn it back on, turning on/off switch wireless and modem etc.

  No idea what happened / how to solve?

  Thank you!!
  A

  Hi angeh,

  What laptop Satellite you have exactly?

  To be honest it's not easy to say that the reason is. This kind of problems with WLAN have many different reasons, but as a first step, I would try a driver WLAN on Toshiba page was updated:
  http://APS2.toshiba-tro.de/WLAN/

  You can also view other threads here in the WLAN forum. You will find lots of information and useful advice :)

• Themes suddenly stopped working after trying the new theme

  I installed a theme in TB and it looked nice, so I decided to try it in FF36.04. It worked, but when I tried to go back to my old theme (same author), it did not work and the area became top black with just the usual text. I tried to go back to my old theme (same author) that has worked well for years. When I went to modules. themes, it enumerates the different themes, but doesn't display photos. If you go to the specific page of the theme (by modules) it doesn't show the author's name and the theme as well as the button disable/remove, no picture or any other detail. It is the same for all themes.

  I tried adding a new topic randomly and it worked and displays the image on the themes tab, but others do not always work. They show different colors if I activate different themes, which I assume is the background. I tried all the usual things, which dates back to default (seems OK), tried to restart FF, laptop computer reboot, etc., but nothing don't is my old theme back I've had for years.

  Because a new theme worked, I could probably delete all my old themes and go and download them and install them again, but something went wrong and I would like to fix everything what it is, rather than leave perhaps a hidden problem.

  Any suggestions?

  • • • Edit - just updated to FF37.0.1 and no change. I have however noticed that the theme I've tried to add to the original (that when the problem started) is not actually in the list of themes! It worked in the beginning, it was when I went back to my old theme that the problem started.

  .

  It's the lightweightThemes.usedThemes pref that stores Persona data in JSON format, so it's probably OK because this implies a good amount of data, especially if you have a lot of lightweight themes installed.

  Firefox puts images of Persona as lightweighttheme-head and foot of page-lightweighttheme in the Firefox profile folder (default).
  The images will be resized and copied to the lwtheme folder and delete files in this folder to make Firefox to use a new character.
  The pref lightweightThemes.usedThemes must be true to make Firefox uses images of Persona.

  You can check the image files and you can possibly try to copy lightweighttheme-head and foot of page-lightweighttheme in the Thunderbird profile folder to the Firefox profile folder if they work in Thunderbird.
  You must remove the current files in the folder lwtheme to regenerate the files that will be used by Firefox.

• Satellite Pro L870 - Touch-pad suddenly stopped working

  Hi - the touchpad on my Satellite Pro L870 - 18G (Windows 8) has suddenly stopped working (after less than 2 months use of)-which makes the phone rather difficult to use. There is nothing wrong with the driver - according to the Device Manager, but I tried to reinstall when even (did not help).
  These things are not normally suddenly?

  Why device manager says that there is no problem when there is a very clear?

  Maybe the touchpad is disabled. Is there a any reaction when you use the FN + F5 key combination?

• Fingerprint reader in my laptop HP Envy 15-j063 cl suddenly stopped working

  In my HP Envy 15 laptop fingerprint reader - cl j063 suddenly stopped working after 3 months of good work in Windows 8 operating system.

  I have tried all troubleshooting list Troubleshooting a (Windows 8) fingerprint reader

  but it does not help.

  I have updated the driver from the HP website and also using Recovery Manager, reinstalled SimplePass using Recovery Manager, update the BIOS...

  My first step was was restore system to a previous date (when the fingerprint reader worked correctly). It did not help.

  There is no list of"biometric devices" in Device Manager.

  There is no unknown device in Device Manager.

  Said control panel ' there is not connected to this computer... fingerprint readers '.»

  But it WAS and worked correctly for several months!

  Please help me solve this problem!

  I wonder if it is software problem or hardware problem...

  Hi SergeyPov,

  I see that you are having problems with your fingerprint reader on your laptop. I'd love to help you.

  You mentioned that you also updated the BIOS. After doing that you did that the fingerprint reader is always enabled in the BIOS?

  Another option would be to possibly check the connections related to the fingerprint reader. It may have a bad contact, or it is also possible that the Board is defective. See the link below that can help checking the connection.

  HP ENVY 15 Notebook PC and HP ENVY TouchSmart PC - Maintenance and Service Guide 15 laptop

  If you are still experiencing a problem, see the following link to download the driver and software from the OEM, but also take note of the limitations to functionality.
  Windows 7, 8 and 8.1 software WBF for validity sensors

  Also, here is the support page for the laptop that also has links to the drivers and other manuals.

  HP ENVY TouchSmart drivers for PC laptop 15-j063cl

  If after all this, you still have problems, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Let me know if this helped.

  Kind regards

• Time travel has stopped working after the upgrade to watch OS 3

  Hi all
  Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

  Thank you
  Ray

  Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

• Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Hello, we are runing Adobe Acrobat Professional 7.0 and it suddenly stopped working for one of our computer after one month after the installation of windows 10. Someone had the same problem and it is resolved?

  Not compatible with the system after XP. Upgrade.