Wireless router will not connect at home, but will be at other places.

Similar Questions

• DLink Wireless Router is not connected - indicates "unidentified network".

  original title: DLink Wireless Router is not connect when tried for the second time for the initial Setup on Windows Vista Home Basic SP-3

  DLink wireless router is not connect to my laptop. I don't use wireless sound, but the connection to laptop via cable ethernet for the initial Setup, the first time it connected and I did not any changes, because I couldn't time to set this up, so, I turned off on that day and triend to finish installing the next day to my surprise I see this router is identified as 'Unrecognized network' and when I used the CD that came with the router and he says no router not connected. I did something wrong here or its how Windows Vista Home Basic Edition will identify, can you please help me solve this problem.

  Hello

  Perform the steps from the link below and see if it helps.

  Windows wireless and wired network connection problems 

  Hope this information helps.

• JWNR2010v5 (N300 wireless router) will support 100 Mbps connection speed internet in LAN?

  I intend to upgrate my internet connection speed of 60Mbps to 100 Mbps, but my provider says JWNR2010v5 (N300 wireless router) will not support 100 Mbps internet connection speed in LAN. Is this true? that which is the maximum speed of JWNR2010v5 for the LAN support. I don't mind the wireless speed, I use the maximum LAN. Thank you in advance.

  Your provider is correct. Either move your router to a router which supports! 000Mbps (MGI) LAN and WAN ports or stay at your current speed Interent.

  http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/JWNR2010v5.PDF

• My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless.

  My wireless router does not appear when I shoot to the top of my devices. It shows my fax, modem, scanner and a few others. But not my belkin wireless. And when I try to add it, the system can't find it. Please help

  Belkin support for your model, for installation instructions.

  Your router will not appear in the devices

• My router is not connecting wireless more... Please help!

  My internet connection is out, and when it was restored, my router would not connect to internet at all.  I tried to reconfigure the router with the installation cd provided and now the router connects via an ethernet cable, however when I totally the ethernet connection cord is lost and when I try to connect wirelessly, I get the message "Windows cannot connect to this network."  Help, please!  I have a laptop HP Windows Vista 64 - bit, an RCA cable modem, and router model is WRT54G2.

  As you have pushed the button of the router config settings SSID and the security must have changed on the router... Then open the page of the router again and redo the wireless (SSID and security) on the router settings.

  Once you have done with the settings, on the computer... remove the preferred network and manually add the network.

  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove all present systems and close all the window... Click Start > Control Panel > Network and Sharing Center > manage wireless network and click Add, select manually create a network profile and click Next, enter the name of your network SSID/network, select WEP for security type and enter your 10-digit network key and click Next, it should say 'Connected successfully to _' close all windows and see if you can connect to the Internet wireless...

• Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact, I was connected to internet

  Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact I was connected to internet... pls sumone help me solve this problem!

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• My Google Adsense ads will not appear in Firefox, but do it in other browsers.

  I recently moved to another city, and after having my son set up my computer, I noticed that the Google Adsense ads that I placed on my website are not displayed in Firefox, but they show in other browsers. I updated to Java, cleared history and cache, etc and restarted my computer. And have not the ad blockers will. Other people I know are able to see the ads; as well as the staff of Google, who say that it is a problem with my computer. Any ideas what I can do?
  Thank you

  MSS

  Firefox 42 + has a new feature of protection against the Tracking is enabled by default in private browsing mode.
  You can see a shield icon on the far left of the address bar when you're in private browsing mode that some content is blocked.

  You can disable this feature in "Options/Preferences > privacy".

  • Options/Preferences > Privacy: 'Use Protection in private follow up Windows'
  • https://support.Mozilla.org/KB/tracking-protection-Firefox
  • https://support.Mozilla.org/KB/Control-Center-site-privacy-and-security-Firefox

• Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet?

  Dear all

  I need help with the following problem:

  Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.

  Appreaciate help on this problem.

  MSD

  I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:

  Using Photoshop | Photoshop help

  To bookmark so that you can find.

• Cannot connect to new modem/wireless router with Dell Inspiron 510 M, but our other machines will connect without problem.

  Old modem/router died, received the new modem and Netgear router separate from Comcast

  Two other laptops (MSI Wind Windows XP, HP 6930p-Windows XP) and my Samsung smartphone connect with no issues.

  Dell Inspiron 510 m is able to connect to the network without wire of a neighbor, but none of our other machines are able to because of the configuration of network security.

  When the network security key for our network on the printer Dell, Dell dialog box displays only 8 digits, but the security key is 10.

  Hello

  Replace the key to WEP (wired equivalent privacy) security check and the settings of the router if you are able to connect. Follow the steps mentioned below.

  Change the WEP key in Vista:

  a. click the Start button.

  b. click Network in the right column in the start menu.

  c. click Network Center in the menu bar horizontally.

  d. click reorganize wireless networks.

  e. double-click the wireless network you want to change.

  f. click on the Security tab.

  g. changing the network security key and the encryption type.

  h. click OK.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• New wireless adapter does not connect to my router

  at home, I have a wireless router WRT120N set up for wireless internet connections, I also use the wireless adapter that comes with it. I recently bought a new adapter wireless like this: http://global.level1.com/product_d.php?id=891 and it connect to the router? Help, please

  I think that the wireless connection on your router may not work properly.

  Create a new wireless network.

  Connect the computer to the router with the Ethernet cable. Open the router setup page and go to the Wireless tab, change the name of the SSID wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to the tab of sup of wireless security and check the security settings. Make sure you have the key/password network correct.

  Go to the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Go into the settings wireless Advanced tab change the interval of tag to 75, RTS and Fragmentation threshold to 2304. Save the settings.

  Now ty to connect to the new wireless network.

  If this does not work then try upgrading/re-Flash the firmware on your router.

  Connect the computer to the router with the Ethernet cable.

  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page and update the firmware on your router. After upgrading the firmware of your router, reset the router and reconfigure.

  Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 30 seconds. Power cycle the router and reconfigure.

• HP Photosmart C309a - but wireless network can not connect

  I have a new printer C309a, but it does not connect to my wireless network.  I have read all the posts and tried everything I can think of (I'm not expert network but reasonably competent), but nothing helped.

  I use a router NetGear DG834N which works very well provide a wireless network for an iMac, 2 iPhone and an iPad. There is also a PC running that Vista wired to the router.

  When I try to connect the printer to the wireless network, it finds the network OK but when I put the password it fails to connect.  Test report says wireless MAC address filtering can be enabled.  But... MAC filtering is disabled on the router.  Wireless isolation is disabled on the router.

  Tried to get this happening for a few weeks now.  I want to emphasize that I managed to print a test page the first time it has been installed (so there was a wireless connection then).  And I got a wireless connection briefly a few days.

  Quite perplexed and not a little frustrated.  Can anyone help please?

  I think it's a question of wireless mode.  Try the other settings from the drop-down menu where it says 270 Mbit/s.

• My iPhone will not connect to iTunes, but connects to my laptop

  I recently installed the latest update to iTunes and after that installation of this update iTunes does not recognize my device. I then installed version 12.4.1 in the hope that it would solve the problem but it didn't.

  I tried uninstalling iTunes and reinstalling it but that has not worked.

  It does not connect with my iPad either, but both devices connect to my laptop.

  I have windows 10.

  I have this same problem do you know how to fix it yet?

• Why my wireless router can not access the internet?

  Since my ISP was purchased by another company I had problems to connect to the internet. 8 years with the former ISP I've almost never had a problem and if I did corrected himself very soon. I haven't changed anything on my end, but I get the info. below of Wireless Diagnostics. I hesitate to call the ISP because I don't want it must make changes that can not help and then I have I don't know how to get back to square one. I have tried everything that I read on the subject of internet connections has dropped, but it makes no difference. I use airport Time Capsule as my router wireless because of its 802.11ac technology while the Actiontec AGT784WNV Wireless Gateway is only 802.11n. Thanks for any help you can offer me.

  

  We need a lot of details.

  Perhaps the best way is a screenshot of the page summary of TC...

  That is to say, click on the TC icon in airport utility.

  

  It gives me a lot of valuable information.

  And I'll probably reset you your TC at the factory.

  Since you are concerned to recover the old settings make a backup now.

  Click Edit in the summary page... and in the main menu, click Export configuration.

  

  Now you have a way to restore the settings you... Although I don't think you want instantly.

  If we remove the fear factor that can help.

  If your ISP changes the settings a full reset and reconfigure the TC is usually required.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... for example. TC5ghz

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• Linksys wireless router is not my new Motorola modem Internet access

  I am relatively new to setting up home networks, so it's maybe a stupid question but I'm stuck! I bought a new modem Motorola (SurfBoard 1621) as my old Motorola modem was not favorable to the increase of the speed offered by Comcast. The modem I bought was a model recommended by their web site. They recorded the new modem last night and I can access the Internet when the PC is connected directly to the modem, but not when the laptop is connected to my Linksys wireless router. (Sorry, I don't know the model because it is at home and I'm at work!) Is there something I should do for the router to recognize the new modem? The router recognizes the wireless laptop, but it can not connect to the Internet.

  Thanks a lot in advance for your help.

  Success! Thanks a lot for your answer. My router is a WRT - 54G links.

  The instructions were very informative, although I have a suggestion. Just restart the modem and the router did not work. I had to reboot other equipment in my system (a NetGear firewall and a level switch 5 ports) and the router and the modem. I would like to see the reboot of reference tracking "and other devices. I guessed the appropriate power of sequence (modem, firewall, switch, router, computer), and fortunately, it worked.

  Again, thank you for your quick response.