Wireless woes - make me regret the reason why I bought a HP laptop
Information on my laptop:
Name of product: notebook PC HP Pavilion g4
Product number: C0N44PA #AB4
8.1 Windows 64-bit
RALink RT3290 802.11bgn adapter Wi - Fi (no update available on the HP support site).
Internet router: CISCO DPC3825 on 100 Mbps network
1 wireless signals drops to 20 meters from the routers. I have a full signal on my Dell or Asus or Samsung devices iPad. This problem existed before Win 8.1 Win8 64-bit upgrade.
2. after the upgrade Win8.1, unable to connect to my Wifi router. It has disappeared from the list of servers of Wifi. I am able to see the server of my neighbor.
3. network cable works fine. I'm typing this from the same computer laptop after plugging it directly into the router.
This makes me wonder why I chose to buy a HP product, with such a poor Wifi adapter. I'll have no issue in the other place on my Dell or Asus PC and can access Internet undisturbed from there, including voice calls.
Please let me know if no available solution this problem. Thank you.
Hello:
There was a recent release driver for W8.1 for Ralink cards.
If you have not tried yet, maybe you can see if it finally fixed the issues of these Ralink cards.
Tags: Notebooks
Similar Questions
-
Thanks for your help.
I can look to iCloud by car and see its contents.
However I can't iCloud pictures like this to see the content, etc.
This is the reason why I wanted to disconnect from iCloud. I had hoped to reconnect and see if I could get then in my photo iCloud content!
Maybe I have the wrong approach?
can you tell me if the Photos on my iPad and iCloud photos are one and the same?
any help appreciated...
They should be the same.
To display your iCloud on your iPad photo library you're following the steps below?
Go to iCloud.com using Safari.
Keep your finger pressed on the semicircular arrow at the end of the URL bar.
Press "Ask site desktop."
Connect to your iCloud account.
Tap the photos icon.
-
Of the reasons why the contents of a form to fill out on-line can be displayed or printed?
I created a form of 2 pages on Adobe Acrobat XPro. I sent it to specific people, and they filled, saved and sent it back. I am able to view what they typed in my monitor only, when I click on the field, but it will not print the content. Of the reasons why the contents of a form to fill out on-line can be displayed or printed?
What you describe is typical of a PDF form that has been used and corrupted by the application on a Mac. An outdated version of Acrobat or Reader will not cause this. A less likely possibility is also corrupt forms PDF, Microsoft Reader, but in different ways than the preview.
-
When I was runing the Sytem Restore I get a message that says "System restore was not completed successfully" the reason he give said "an unknown error occurred during system restore.
Problems with system restore:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
1. If you use Norton (Etc), disable it before using System Restore. info at the link above.
2. try SR in safe mode:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
3 Malware will stop at the system restore:
If necessary, do all the workSafe Mode with network.
To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight.
See you soon.
Mick Murphy - Microsoft partner
-
Help a brother here.
We cannot do nothing, once the trial period is clocked on a particular system and the quick time is over, it is not possible to reset it.
However, the only option that would work and it would not be feasible at all, which is the reformatting of the operating system.
Or
As an alternative, if you tried version CC 2015 and happened to expire, you can always try other apps like 2014 CC / CC 2013 versions as a free trial for 30 days.
Note:
Make sure that the Date and time of the system is set properly, once the trial has started and if the system clock is changed, it will affect timed test duration.
Scan a computer for threats once for confirmation.
Example:
Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools
-
Lack of cc library initialization in Adobe cc which is the reason why
Lack of library initialization in Adobe cc cc
What is the reasonwho could help me?
Please check: error CC2015 on PC: "something went wrong initialization library of creative cloud" - how to fix?
I hope this helps.
-
I use Microsoft Security Essentials on Vista x 32. Security Center tells me to start Windows Defender. I click to start, but he tells me that I have to restart my computer or manually start Defender myself. I go to services, and it does not advocate. It basically tells me that my system has no need currently the program or there is another reason, it does not start. Responses tells me that for the error code of course, I met error 0x800106ba later Code it tells me to try to start it manually if it doesn't work I have uninstall Defender and need to reinstall it. Yet when I go to uninstall programs, Defender is not listed. I tried to install it again because it is not listed, I thought I could. When I went to install it, it-error telling me that I have already as it came pre-installed with Vista.
Now, my question. Do I really need Defender since I use Microsoft Security Essentials? Is in fact an older version almost essential? Why it tells me to start it if it is not needed? And if necessary, why it won't start
Hello
Be sure to check in the MSE Forums.
Answers - MSE Forums
http://answers.Microsoft.com/en-us/protect/default.aspx------------------------------------------
Windows Defender features are included in MSE, defender of loading would be redundant.
Windows Defender antispyware =
MSE is antivirus + antispyware.
Then think about MSE as Windows Defender with more added (which is).
Check this box:
Startup tab - disable Windows Defender (if the list) and APPLY / OK - REBOOT
This should stop loading Defender.
==========================================================
If necessary after the foregoing:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlCheck the default services and dependencies to ensure that they are running.
http://www.blackviper.com/WinVista/services/Security_Center.htm============================================
Security Center incorrectly reports, or try Windows Defender
Start incorrectly, or both.Security Center not related anti-virus or firewall State correctlyhttp://www.winhelponline.com/blog/security-center-not-reporting-anti-virus-or-firewall-status-correctly/
How to fix Vista Reporting incorrect information Security Center
http://www.Vistax64.com/tutorials/195736-Security-Center-not-reporting-correct-information.htmlHow to disable or enable the Security Center in Vista
http://www.Vistax64.com/tutorials/67737-Security-Center.htmlThis thread might help as it might be a permissions problem.
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/3d2049ae-4581-439b-8E15-3f603f5c60f0/=====================================
Troubleshooting of Windows Defender
http://support.Microsoft.com/kb/555957"%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender
Start - type in the search box-> Windows Defender - find top - make a right click on it.
RUN AS ADMINIf no joy using Start - computer or Windows Explorer to access this folder and create a
Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
see if they point to here.Goal
"%ProgramFiles%\Windows Defender\MsAsCui.exe".Start in
"%ProgramFiles%\Windows defender.How to enable or disable the Windows Defender
http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html--------------------------------------
Maybe something here if necessary:
What is display / causing the error message? Some anitvirus/security/antispyware products can
cause this error. On those who use you, including those that your never had even those
uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.Start - type in the search box - Services - find top - Right Click - Run as Admin
Windows Defender - value STARTED and AUTOMATIC
or set MANUAL and STOPPED if necessary
Fix for the problem of 800106ba.
http://support.Microsoft.com/kb/931849Error (an example) of McAfee report.
http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3DsearchCheck also:
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Do you know why a file I exported using Adobe Audition doesn't play like a MP3 player?
Well, to give a detailed response, we will have to a lot more on exactly how you did your export MP3 and where it will not play.
However, a quick generic conjecture is that the hearing can make MP3 bit rate Constant (CBR) and bit rate Variable (VBR), as well as a wide range of bit rates. (All of this is implemented on the screen POPS when you save in MP3 format). Some MP3 players get picky with the files VBR and others do not like the low rate files then you better check these settings on your export.
-
Notify the switches - the reasons why I shouldn't put it no?
I understand when to notify the switches would be set to no (NLB and Unicast); However, how does it influence the VM environment? I set it to no. to use NLB, but I would like to know if attributing it NOT is a negative thing.
Are there problems that might arise in assigning notify NO switches? Could Virtual Machines disconnect if a there is a failure of the NETWORK card? Or is it rather a good to have features?
Examples would be great.
Thank you
DavidYes, assigning "Notify switch" is a bad thing.
Here's why... Your VMware hosts are connected to switches of the network physical (I hope at least two different those for redundancy). These switches are MAC address, transfer of tables. The tables to associate each MAC address to a physical switch port. When a frame arrives, the switch will get the MAC address in the destination table and decide which physical port to send the image to.
If a failover from NIC, converses with your virtual machines with a different physical NIC it also means a different port on the physical network switches. If you do not notify the network switches that something has changed, they will continue to search the information old tables and send frames to the old port. Because the virtual machine is no longer at the old port, it won't have the frames. You lose network connectivity.
Who can continue for a little while - anywhere from a few seconds to a minute or two, until the switches update their tables. For more details, search for gratuitous ARP.
If you are using NLB, you must do two things:
1) has cancelled two physical network adapters on each host and dedicate to those of NETWORK load balancing. Create a new vSwitch, assign the NLB NIC dedicated to this new vSwitch and make sure that your NLB servers pass only. Notify this vSwitch using willpower alone NLB where cheating is set to no.
(2) for large facilities, if you have several NETWORK load balancing servers, you can cancel just two or three hosts and makes a separate group. You can disable HA in this cluster if you wish. You can notify switches the value no and worry affect the rest of your virtual machines.
Hope this helps!
-
When I plug my second monitor using the hdmi port and change the monitor mode to extend the audio stops working. The volume mixer still watch movement audio but released no audio. Ive looked upward a soltion but I can't find an awenswer to this problem. any thoughts why this could happen?
solved my problem, go into the menu speker and disable everything except the hp speakers, reboot everything and save options.
-
If your service uses Google, I have your service. How a search without using Google?
You can use any search engine of your choice.
- See-> https://support.mozilla.org/en-US/kb/Search%20bar
- See-> http://kb.mozillazine.org/Search_Bar
- The search engines that you can add-> http://mycroft.mozdev.org/
The recent change in Google's policy only affect users if they sign in with a Google account or use a Google product that requires a sign-in (i.e. Gmail)
- http://www.LATimes.com/business/technology/la-fi-TN-Google-Privacy-Policy-March-1-20120229, 0, 2129072.story
- and Google is not not alone I look at-> http://www.theatlantic.com/technology/archive/12/02/im-being-followed-how-google-and-104-other-companies-are-tracking-me-on-the-web/253758/
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
The \windows\installer folder takes a lot of space and I want to move it to another drive if possible. Ashwin
No, I don't think. Just about anything in the Windows directory cannot be moved. You will need to find another way to clear disk space. Try to compress your drive hard (if you don't know how, ask).
-
Diagnose the reason why I can not run (or even remove) an exe (JDK Installer)
I have a portable Win7 provided by my company. I'm supposed to have "admin rights" on the box. In the past I have never had any problem with the installation of things.
Today, I tried to download an installer for a newer version of the JDK. After downloading the file, I tried to run it normally and it seemed that nothing happened (just return at the prompt). I then tried to run it from a cmd, and it also seemed to do nothing. I then even tried to remove it with "DELETE", and it says "access denied." It was on a cmd run with 'run as administrator '. I get the same results with a 'normal' cmd
I checked that I could delete the other files in the same folder as the exe file.
I then tried to inspect the security properties of the file. From everything I see, I have 'Full control' on the file, including "read & run ' permission.
I then installed the tools from SysInternals "AccessChk". I just ran this without any options on the JDK installation file and an another exe in the same folder that I checked that I can run (although I have not tried to remove).
I can't see what follows (with some info that have been omitted):
---------------
JDK Installer:
R the world
RW.
RW\Domain Users Another exe in the same folder:
RW NT AUTHORITY\SYSTEM
RW BUILTIN\Administrators
RW.
RW S-1-5-21-------------------
What could go wrong here?
Hello David,.
The question will be better suited to the audience of professionals on the TechNet forums.
I would recommend posting your query in the TechNet forums.
TechNet Forum
https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproappcompatThank you
-
I'm playing the crazy Kingdom of God on Adobe Flash Player but the "settings on this page are not applicable to the Chrome or chrome based browsers (PPAPI)." message when I go to global settings to try to resolve the problem. This has something to do with my problem for the Kingdom of the mad God does not?
Hi Jess.C.N,
Chrome uses the PPAPI plugin and the settings are managed using the online settings manager, not the local settings manager. Click the 'Learn more about Configuration of Flash Player with Chromium-based browsers' to learn how to manage these settings for the plugin PPAPI browsers. You can also go to Adobe - Flash Player: settings - Global Privacy Settings Panel Manager to manage the settings of PPAPI according to the browsers.
--
Maria
-
How can I get adobe connect when I bought cloud creative adobe?
To start https://helpx.adobe.com/creative-cloud.html the Cloud
http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq
Maybe you are looking for
-
TV does not and the mysterious loss of Windows MCE on my F-10
Cannot get TV to work on F - 10 when buying. Ignored for a while. Back to try today and Windows Media Center has disappeared from my laptop! Don't like using the recovery as a disk is going to lose all my files to date.
-
Count the edges of the 2 signals TTL (Heidenhain linear scale)
Hi all This is my first post here. :-) Currently, I'm doing a VI to be used with a linear scale. The linear scale gives 2 TTL signals that have an offset of 90 °. The change in distance of the linear scale is given by counting the fronts and edges of
-
Hello Having 8.5.1, NI DAQ mx 9.3 Labview and NI USB-6353 map. I do 16-bit on the port entries and silmutanement as that of an analog voltage while doing the timing on the LSB of the 16 bits. Then I get the 200279 error, knowing that it gives me good
-
try to disable the mode of start-up situation safe
Why can't I undo or remove mode safe mode Office? now can not download any microsoft security? I just installed Windows XP a week ago. is this situation that is affecting. This will affect any upgrade
-
exsternal music disk hard media Player 11
How to transfer my music from my drive hard exsternal to my media player11