Wireless zero configuration service does not properly

Similar Questions

• Wireless zero configuration service has to be started manually

  Hello
  When I reboot my computer or turn it on after being turned off, my wireless
  zero configuration service has to be started manually by me every time. If I have
  do not start, my connection will not work. Even though I have set up the service
  to start automatically and then apply the change and then reboot, it still
  default values and no departures will support in the manual. Does anyone know how I could
  might cause, or could fix this problem?

  I appreciate your help.
  Salem

  Hello

  You use a Vista computer and is your ISP Internet BT by chance?

  If it is Vista, and especially if it is BT, download & install the following kb:

  http://support.Microsoft.com/kb/933872/en-us

  If you don't have XP, you can try the following:

  Launch-online Run => type cmd and click OK to open the command prompt

  type the following command (make sure you include spaces exactly as they are here):

  type sc config = own wuauserv

  Press ENTER. - you should see the text "change config service success."

  then type:

  SC config bits type = own

  Press ENTER. - you should be the text "change service config success."

  See you soon

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Why wireless zero configuration service automatically stop and I start it manually?

  Original title: wifi Poblem in xp

  In Windows Xp wireless zero configuration service automatically stops and I start it manually I want to know why this service stopped automatically help me solve this problem

  Hello

  1. Did you changes to the computer before the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1:  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services: http://support.microsoft.com/kb/968682

  Method 2:  Also I suggest that you install the updated drivers for the network adapter on the computer by visiting the manufacturer of the network adapter and verify that it works.

  How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

  Hope this information is useful.

• Wireless Zero Configuration Service not installed

  original title: Wireless Zero transactional Service not installed

  My top of Office XP Sp3 Dell doesn't seem to have the Automatic Configuration Wireless installed under the heading 'Services '. How can I install?

  1. click on the Start button and then click Control Panel.
  2. If you are in category view, then click Network and Internet connections icon, then click the network connections. If you are in Classic view, double-click the network connections icon.
  3. in the window network connections, LAN or Internet high speed, select the icon to connect to the Local network. In the menu bar, click on file and select Properties, or simply right-click on the Local area connection icon and select properties from the context menu).
  4. in the Properties window of connection of LAN, on the general tab, click install.
  5. in the window select the component Type of the network under "The type of network component you want to install, click" click to select the icon of the Service, and then click the Add button.
  6. in the Select Network Service window, click on the diskette provided button, click the Browse button.
  7. in the window to locate file, navigate to the C:\Windows\Inf folder (this is a hidden folder). Click to select NETWZC. INF, and then click the Open button.
  8. in the window to install it from the disc, click on the OK button.
  9. in the window select the Service network, in the Network Service box, select Microsoft as the manufacturer, and then click Wireless Auto Configuration.
  10. click on the OK button.

• Have a "Wireless Zero Configuration" service services means that I have a wireless adapter?

  Hi, this is my first question in the Microsoft forum,
  I'm trying to connect to my old computer which I have not used for 6 years to the internet but I'm not a great success. I think that my pc is not a wireless adapter. But in services, I have a service called 'Wireless Zero Configuration'. This means I have a wireless adapter or even the pc without card wirless they such race of service?
  PS - I am running XP

  No, this service is installed on all computers, wireless or not.

• Discovers the problem of transfer Server - Service does not properly and maintenance in the waiting mode

  Hello. I have try to add view transfer Server Infrastructure and get the problems of follow-up:

  1. after that I have add forwarding server to "transfer servers" in the view manager, he is "on hold" and "missing transfer Server Repository. But on the record transfer servers 'System health' dashboard of my server in red and error is "the service does not work properly.

  2. If I try to put the server in maintenance mode, status is changed to "pending maintenance mode" and nothing happens at all. Server to remain in this State forever.

  I tried with two servers, Windows Server 2008 R2 and Windows 2003 Server R2. Both the same problem. I can't get another clue what is the problem.

  NIC is E1000, static IP and 'LSI Logic parallel' as a SCSI controller

  What can I do?

  Thanks for all replies.

  Change the role of the administrator of your view (or whatever the account that is used to manage the server transfer has role) on vCenter and put a tick in the box for Global-manage custom attributes.

  This fixed our environment, the index was in this error message on the display connection server.

  The error messages in the view ' 21: 51:50, ERROR 734 [ServiceConnection25] error when adding custom fields: [transfer Server Status, lock VM status] for type MB: VirtualMachine com.vmware.vdi.vcsupport25.ServiceConnection25. » addCustomFieldNames(SourceFile:1591)
  AxisFault
  faultCode: ServerFaultCode
  faultSubcode:
  "faultString: permission to perform this operation was denied."

  Aaron surfboard

• When you try to connect to a wireless network I get this error: "If you want Windows to configure this connection, start the Wireless Zero Configuration service.

  original title: WiFi

  I want to connect to a wireless network on my laptop. When I go to the page of networks wirelss under the "choose a wireless network" it says "Windows cannot configure this wireless connection. If you want Windows to configure this connection, start the automatic Wireless Configuration service. My other laptop does not, and I don't know how to make the wireless network options appear. Any help is appreciated!

  Hi AshleyHenley,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?

  See the article and run the Fixit tool available, check if it helps.

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702

• DV7-6b75nr: Intel PROSet/Wireless Zero Configuration Service. Stopped working

  In the last days, I started to see this error in the Action Center reliability monitor. If I check "msconfig" / Services tab, in my view, it is running and a tick the box on the left. A reboot does not see a new entry in the monitor. It seems to occur only on the first boot of the day.  Quick Compand "sfc" files are good. I am attaching a capture details

  Waiting for an answer... Thank you

  

  Hi @Stu2009 ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked into your question your and the

  Intel PROSet/Wireless WiFi software works not properly on your laptop. Here is a link to Microsoft for help with the operating system of questions.

  If this is not enough, you can try in Device Manager, uninstall the Intel PRO/Wireless Network Connect, network adapters, right-click on the Intel PRO/Wireless adapter & select uninstall. Then in Add/Remove programs in the control panel select the Intel PROSet/Wireless WiFi software. Reboot the laptop.

  Here is a link to reinstall the Intel PROSet/Wireless WiFi software as it says this error could be in the software, not the laptop.

  I hope this helps.

  Thank you.

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• No wireless networks not found on laptop - the WiFi windows service does not work on this computer

  Hello

  I have a laptop model Toshiba P205-56347 running Vista home premium and a lynksis WRT54G V8 router model.  The WLAN light is solid and the internet light flashes on the Linksys.  I have Comcast cable as my ISP.

  I've seen reported similar problems.  All of a sudden my wirless acess stopped working, some networks are displayed and I get the message 'windows wireless service does not work on the computer.  I am not able to restart the windows wireless.  I can't connect to the internet on the laptop.  I have a DELL PC and can access the internet here if necessary.

  In the network and Discovery Center, I see that network discovery is disabled.  I can't set it to on.

  Under system devices, I have the following network cards: Intel (r) Wireless WiFi Link 4965AGN and Realtek RTL8101 Family PCI - E Fast Ethernet NIC (NDIS6.0).

  Help, please.  I'd appreciate any help.  I need a good starting point for resolution and wouldn't start using suggestions that corrects other issues.  I design financial systems and purchase online, but I'm not a technical person with regard to updates Vista, drivers, etc..

  Thank you! After reviewing the responses to similar problems, can anyone suggest if I should try one of the following values: 1. run SCF/scannow at the command prompt I don't know what that's going to fix it and do not want to make the current problem worse. 2. download the driver for the network drivers. If you would be grateful if someone could help me find the driver and download it. 3 reinstall Windows Vista Home Premium SP1 since the restoration of Toshiba CD I would appreciate greatly any information. Donna

  Hi blondswede,

  You can try running sfc/scannow to see if you have corrupted files. That won't be a further problem on your pc. After that, you want to make sure you have the latest drivers for your laptop, especially drivers of the NIC (network card). Go to the following link to Toshiba for your model and download those:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=SB&OS=&category=&MOID=1757721&RPN=PSPB3U&modelFilter=P205-S6347&selCategory=3&selFamily=1073768663

  If you're still having problems, and it has recently emerged as a problem, you can try to restore your system to a point in time before the problem started to use the system restore. Here are the steps to follow:

  • 1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    2. In the System Restore dialog box, click on choose a different restore point and then click Next.
    3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
    4. Click Finish.

    The System Restore tool

    If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    To restore the operating system to an earlier point in time, follow these steps:

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know how it works and if you need additional assistance.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP configuration wizard does not detect my wireless network.

  Hello

  I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

  Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

  All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

  I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

  I tried the following: -.

  -Rebooted router

  -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

  -Created a new comments system.

  -The router is configured to run g and n network.

  -The network names have any unusual characters.

  -Tried to enter the name manually.

  USB printing is fine.

  Is there something about the installation wizard that can not locate networks?

  OK, on the front of the printer, go to wireless menu and restore the default settings.

  When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

  Be careful with the comments network, if your computer or printer connect you will not be able to print.

• (Wireless) service does not, access denied - Windows 7

  I am running Windows 7 family and have just started to loss of internet connection.  I had recently bought and ran the software PC Matic, perform a scan and an option "auto-fix".  He seemed to have lost the WiFi connection as well, but I'm not sure.  The only thing I know is that my Wireless Service does not and shows "stopped" in the Task Manager, and the service is "automatic".

  When I try to 'start' Wireless Service, a dialog box appears informing me that "access denied."  How can I fix it?

  Help, please...

  Hey, Kent.

  Thanks for posting your concern. Let's see if there are programs or applications that blocks the internet connection by performing a clean boot. Please see the instructions under "Windows 7 and Windows Vista" in this link: How to perform a boot in Windows.

  We can also check if there are some files corrupt or broken update installed that is blocking the connection by running the file system (CFS) auditor. Please follow the steps below:

  1. press on the Windows key on your keyboard.
  2 type cmd, then right click on the result, then choose Run as Administrator.
  3. enter sfc/scannow.
  4. hit enter.

  Keep us in the loop for updates.

  Kind regards
  Monica cam

  If you find this article useful, please mark as answer.

• WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT

  My Sony VAIO E Series windows wireless service does not

  the computer says that

  Hi Isabel,.

  1. Exactly when you receive this message? It's trying to access wireless internet?
  2. What is the exact model of your PC laptop Sony Vaio E series?

  Make sure that the laptop wireless switch is turned on.

  Method 1:

  Please follow the steps to start the WLAN service.

  1. Press the Windows key and R together to open run prompt and type services.msc
  2. Select the autoconfiguration WLAN service in the list, right-click on properties
  3. Change the startup type to automatic
  4. Click the Start button
  5. Click on apply, Ok.
  6. Restart the computer and check if it works.

  If the problem persists, proceed from the link below to fix this problem.

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• Error: The Windows wireless service does not work on this machine and is called autoconfiguration WLAN service.

  Original title: I do not see my available networks

  I get this message when I try to solve the problem: Windows wireless service does not work on this machine and is called autoconfiguration WLAN service. Does not start Windows wireless service failed questions available detection area 5 Windows wireless service does not work on this computer only set not Windows wireless services is also called the autoconfiguration WLAN service.  Network Diagnostics log file name: 5894B3A3-5541-48-A8FE-7A7E2E8E3B10. Detection of Repair.Admin.0.etl detail information name of the computer Collection: RODRIC29 - PC Windows Version: 6.1 Architecture: amd64 time: Thursday, August 23, 2012 12:27:11 Publisher details Windows Network Diagnostics detects problems with network connectivity.  Package version: 1.0 Editor: Microsoft Windows can help anyone? (Windows 7 Inspiron computer laptop)

  Hello

  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have security software installed on the computer? If Yes, is it updated regularly?

  3. have you done any software or hardware changes on your computer before this problem?

  4. What are the troubleshooting steps you have tried to solve the problem?

  Refer to these methods.

  
  Method 1:

  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service.

  (a) click Start, type Services.msc and press enter.

  (b) locate the autoconfiguration WLAN service, double-click to open its Properties window.

  (c) on the general tab, change the Startup type to Automatic and click on the Start button.

  (d) click apply and then click ok.

  (e) try to connect to the wireless connection and check the result.

  See also:

  For more information on the wireless settings, see this link:

  http://TechNet.Microsoft.com/en-us/library/ff802404.aspx

  Method 2:

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  See also:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check if it helps.