With 232/16 PCI driver problem

Similar Questions

• With HP Photosmart 7525 driver problems

  Hello, I had problems with my printer. All first whenever I need to print something it gives me an error saying: failed to connect to the printer. Even with a sweep. I have to restart my router to make it work. I have however found no difficulty analysis. I ran doctor scan and it came to pass in the section problems with sadki Scan and driver to check. Please say suggestions.

  Hi @TheFatCrafter ,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your printer HP Photosmart 7525 and connection problems.  To get help, I'll need to know more information:
  Is that the printer is connected wireless or Ethernet to the router?

  If the power cable is connected to a surge protector, or directly to a wall outlet. Emits when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  In the meantime, I suggest trying the following

  Uninstalling the printer software.

  Re-install using the HP printer install wizard for Windows.

  I hope this helps.

  Thank you.

• Windows 7 blank screen with cursor Hang (Nvidia driver problems)

  So, I tried to understand this for 2 days now and can't find a definitive solution. I'm running Windows 7 64 bit and my graphics card is a nvidia 9800 Gtx +. Whenever I try to update display drivers (I tried all the nvidia versions on their site for windows 7 64 bit drivers), during the restart I get the Windows Logo and then where he should go to the login screen, just blank with a slider that is mobile and never changes. I write of the same model, but I have just the driver value Standard VGA (Did it safemode). Any ideas?
  EDIT: I thought I might add, when I initially installed I had to use a friends video card to do finish, it would hang at the end of the installation. I swapped my card after the installation.

  I tried the drivers from EVGA, which is my card manufacturer. Not good. And on Windows 7 the default driver has not yet so why I had to standard VGA. I solved the problem by opting for an ATI Radeon HD 4870 instead, works perfectly. But it still bothers me that the drivers for the Nvidia card will not work with 64 bit vista or 7.

• with Hannspree HF207 Monitor driver problems

  Have a pc HP P7-1020 with 8 GB ram, OS home premium 7 64, Epson NX110 printer and monitor Hannspree HF207. Lately my monitor showed a website very clearly, then a few minutes some of the verbiage will become blurred and multicolored on-screen. Have you checked the drivers using the display function in Control Panel, and it shows as being up-to-date. I have all the updates for Microsoft, including both Java and Flash is updated as well.  It started to appear in the last three months, I think. Don't know what to do, research shows the Hannspree website display must be set to 1600 X 900, and it is. When not to use a browser display shows a screen with rotation of pictures of MS as background, have a few gadgets on the screen to the right, all show clear and strong, it is only when the use of browsers that display is messed up, I use Firefox v19.0.2, with adfirefox and a few plugins, for Foxit PDF and download add on to.

  Any suggestions to fix this will be useful. I'll try even set up with the help of IE10.0, or even Chrome and if it is clear on those will put a comment on it to show that.
  Thanks

  (1) Manual of the user to read, download f rom here

  http://www.Hannspree.com/us/en/product/electronics/monitors/HF207HPB/detail.aspx?sort=2&page=1&pattrs=80&attrs=85&viewall=0

  (2) read the specifications from here

  http://www.Hannspree.com/us/en/product/electronics/monitors/HF207HPB/detail.aspx?sort=2&page=1&pattrs=80&attrs=85&viewall=0

  (3) download the latest driver from here monitor

  http://www.Hannspree.com/us/en/product/electronics/monitors/HF207HPB/detail.aspx?sort=2&page=1&pattrs=80&attrs=85&viewall=0

  (4) uninstall old graphics drivers as appropriate

  (5) download and install the latest graphics driver to hp support site see below

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5098896#N888

  (6) restart the system

  (7) see the problem solved, if not way

  (8) download, install and use the utility of diagnosis here

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5098896#N888

  (9) try to reset your internet browser explore 10 or currently using

  Guilbert

• Creative speakers with game port pci card problems

  stop port game working with the joy stick when I upgraded windows vista to xp home, sp3, I tried all microsoft solutions but not good

  Try to update your driver, there could be a driver for vista. Mine has no driver compatible vista (old)

  Creative support:

  http://support.creative.com/

  I hope I could help

• T400 with Intel X4500HD graphics driver problem, also of fingerprint fingerprint reader driver

  Device Manager says:

  This device cannot start (code.10)

  To use standard VGA, although I downloaded article "Intel 4500MHD (Intel GM45 Express Chip)" to "Windows Vista (32 bit)" whitch I have file 7xd549ww.exe and installed! PCdoctor did the same thing - still nothing.

  What should I do to solve the problem?

  PS! The same is with fingerprint reader...

  Solved my problem of video - I've not read the installation manual.

  (After installing the package

  Specify SETUP.EXE with the full path name where you extracted the package     in the step 2, and click OK.     Example: C:\DRIVERS\WIN\DISPLAY\SETUP.EXE
  

  )

  Thanks, SURIYA

• Reader of SD with Tecra M2 driver problem

  Hello

  I formatted my laptop: TECRA M2 PTM20E-0R1LZ-FR / PM 735

  I found all my drivers for all execpt for the SD reader componet.

  It was very difficult to find the SD host controller, but I finally found it:
  Toshiba Secure Digital host controller
  oem17.INF:Toshiba:SDHost:6.0.4058.0:pci\ven_1179&d ev_0805

  But now, when I insert my SD card, I have a problem with the SD reader driver.

  So, if anyone has an idea...

  I did all the forum, all the driver toshiba support page and nothing on that kind of driver.

  Thanks for your help.
  Kind regards
  xVZx

  What type of problem do you have when you insert the SD card?
  Do you use drivers from the Toshiba support page?
  Do you use took in charge a card SD (support capacity)?

• Driver problem with a dc7100 cmt

  I have a driver with my Hp dc7100 cmt tour 7 months ago, I upgraded Windows Xp pro to Windows 7 Edition System Home Premium, it was working fine... or so I thought, then week or so I did a Windows update that has problems starting

  Windows 7 upgrade advisor has been downloaded in my system, I started to have a driver problem he always tells me to update my drivers for systems, I well updated some drivers but I was not of the most important of them.  It is a Graphics driver (WDDW) driver for windows aero graphics would work my CD-Room go stale and USP port pilot who was also outdated... The player windows Media have also stopped...  He told me to contact my PC manufacturer or retailer to see it an upgrade is available, I've been looking and asking for two days... I hope someone reading this and can give me some advice on how I can get these updates, or tell me why I can't get HP... My goal is not to get out a purchase of a new system, but fix the one I have... as a student, my funds are very low!  Pease Help, thank you

  Hello:

  What graphics card you have in your PC?

  You mentioned Aero, and you wouldn't get Aero on a dc7100 with the integrated Intel graphics card.

  You'd only Aero, if you have a PCIe x 16 graphics card is windows 7 capable.

  If you have the Intel integrated video card, I got something that will install the video driver, but you won't have Aero.

  In addition, he will work for W7 32 bit.

  So, please post back and let me know what video card you have in the PC, because if it's an add-on, one, I would need to know the manufacturer and model.

  Paul

• NI-VISA PCI driver with interruption detection

  Hi all

  I am new to PCI and PCI driver, a problem when using the driver NI-VISA to program a PCI driver with the detection of the interruption.

  Here's the situation:

  This PCI card is composed of two chips: the chip to bridge pci PCI9030 and ET1100 chips (the local chip connected to PCI9030). The ET1100 memory is 1:1 mapped to the memory of PCI9030 from BAR2. Now I want the PCI card generates an interrupt when the contents of the registry to offset 0 x 221 change.

  

  I add detection of interruption (see the figure above or fixing), abduction of interruption and disarm following the guide "using the NI-VISA Driver Assistant and NI-VISA to develop a PXI (e) /PCI (e) driver in Windows. However, when I finished and installed this driver in LabVIEW RT operating system, the system can recognize the card, but cannot generate the interruption when the registry at offset 0 x 221 Exchange, so someone tell me the reason? Or tell me how to program this driver using NI-VISA?

  Any suggestion is welcome.

  And I thank you in advance

  Hello

  What application development environment you use? If you are using LabVIEW, there are a few additional considerations, you must keep in mind: http://www.ni.com/white-paper/3789/en/#toc6

  Were you able to get the interruption of work in Windows?

  If you can put a code that would also be useful.

  I was going to recommend that you post to the Commission of control Instrument, but I see that you have done all this. The PXI forum is generally used to ask questions about PXI Controlelrs, chassis or card.

• ADS Instant HDTV PCI has a driver problem. Its used to play through the speakers of HDTV. Now he doesn't.

  I have a Sony VAIO laptop that I have previously connected to a TV high definition using the HDMI cable with success (sound and video broadcast by the TV).

  I use Windows Vista home edition.

  A few months ago, the noise ceased to play through the TV speakers.    I recently used a program of automatic correction of Microsoft and got the following error message: "ADS Instant HDTV PCI has a driver problem.  Can offer you a solution?  Thank you.

  Hello

  See the link below, he talks about the similar issue.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/audio-device-ads-instant-HDTV-PCI-cannot-start/00bb256f-cf91-44A3-8a66-733ad0a4cdfa?LC=1033

• RALink Bluetooth PCIe Adapter has a driver problem Windows 8.1 - code 39

  RALink Bluetooth PCIe Adapter has a bus PCI driver 2 problem. device 0. function 1 Windows cannot load the driver for this hardware device. the driver may be corrupted or missing (code 39)
  Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  HP ENVY desktop PC 700-050
  Serial number: MXX32503WL
  Product number: H5P83AA

  Hello

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39). There are many causes of Code 39 errors:

  • A required device driver is missing.
  • A required binary file is corrupted.
  • There is a problem with the file I/O process.
  • A driver that refers to an entry point in another binary file cannot load.

  Follow the steps under Code 39 of this Microsoft article:

  Error codes in the Device Manager in Windows

  http://support.Microsoft.com/kb/310123/en-us

  Uninstall and reinstall the network driver to recreate a link from this link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5368252#N614

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• DRIVER PROBLEM WITH CANON SMARTBASE PC1210D when INSTALLING ON WINDOWS 7 RC 64 - bit EDITION

  I RECENTLY INSTALLED WINDOWS 7 RC 64 bit EDITION, WORKS FINE BUT IT WONT LET ME INSTALL MY CANON PRINTER DRIVER SMARTBASE PC1210D I HAVE TRIED to INSTALL all THE DRIVER FROM THE CANON SITE, ALSO WINDOWS UPDATE cannot FIND ANY DRIVER.
  I ALSO INSTALLED THIS PRINTER ON ANOTHER PC WITH WINDOWS XP (IN NETWORK) IT WORKS FINE ON WINDOWS XP, IT SAME USED LET ME INSTALL AS A NETWORK PRINTER SHARE.
  ANY HELP WOULD BE APPERICATED
  Thank you

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is for Windows 7 Forums.

  This is the place to ask your questions Windows 7 partners.

  The driver problem is not to do with Microsoft.

  CANON has written drivers for their products.

  If CANON does not write a driver for your model of printer for Windows 7, there's no.

  Try a Vista of CANON printer driver. If no available Vista printer, or it does not work, you are out of luck.

  And gently, do NOT enter capitals,

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner

• Start with external hard drive problem

  I recently bought a Western Digital 1 TB external hard drive. When it is connected through the USB port my Pavilion a815n Windows XP hangs on the blue HP screen at startup. Western Digital technical support Advisor info sent to me I need to change a setting in BIOS but I can't find the trunk of USB device option setting in the BIOS of HP.  Can you tell me how to access this setting, or what else to do to solve the problem?  Thank you!  Jake

  Problem:
  After connecting a device USB to the PC, the computer does not start in Windows.

  Cause:
  The motherboard has a boot from the USB device, or a similar option, which is enabled in the system BIOS.

  Solution:
  In the system BIOS, disable the option to boot from the USB device and the USB Legacy Support option. This will allow the PC complete the process on the internal hard disk and allow you to enter Windows. If this does not work for any reason, you should boot your PC before connecting the USB key. Once the computer is fully booted Windows, plug the USB and wait for the operating system to detect the drive.

  Update the BIOS seems to have solve the problem. It was normally restarted with the attached hard drive.  Thank you!!  Jake