with Hannspree HF207 Monitor driver problems

Similar Questions

• With HP Photosmart 7525 driver problems

  Hello, I had problems with my printer. All first whenever I need to print something it gives me an error saying: failed to connect to the printer. Even with a sweep. I have to restart my router to make it work. I have however found no difficulty analysis. I ran doctor scan and it came to pass in the section problems with sadki Scan and driver to check. Please say suggestions.

  Hi @TheFatCrafter ,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your printer HP Photosmart 7525 and connection problems.  To get help, I'll need to know more information:
  Is that the printer is connected wireless or Ethernet to the router?

  If the power cable is connected to a surge protector, or directly to a wall outlet. Emits when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.
  In the meantime, I suggest trying the following

  Uninstalling the printer software.

  Re-install using the HP printer install wizard for Windows.

  I hope this helps.

  Thank you.

• With 232/16 PCI driver problem

  I had a hard drive failure on a machine that communicates with several robots using RS232 and have the old PCI-232/16 186492 B - 01 Board I am getting down to work. This is not the most recent of the PCI-8430/16. He has worked previously on Windows 7 but now I can not for the life of me find the windows drivers. This machine is before my time here at the company so I have mentions on the old installation. Same computer, but with a new drive, new install Win 7 and LabVIEW 2016. I don't know that the previous version of LabVIEW has been 2014. The only way that I can not find is to intall OR Serial XX. I installed 15.0 NOR-Serial, but it may lack the suitable driver for the PCI-232/16? Note that registration on the Web page for NOR-Serial 15.0 lists PCI 232/16 in the list of devices. Maybe I do not a good thing to get the driver for this device windows? The other option is to replace the card with a serial port external USB multi adapter - there is another similar fixture who has this road and I know I can get this to work.

  Make sure that the device is associated with the NOR-Serial driver in Windows Device Manager. Pilot tab in the Properties window should list National Instruments as the driver provider.

  If it isn't, you will need to update the driver manually. The driver should be placed at the C:\Windows\System32\drivers\NiSerU.sys

  If it still does not work, you might want to try the device in a different PCI slot.

• Windows 7 blank screen with cursor Hang (Nvidia driver problems)

  So, I tried to understand this for 2 days now and can't find a definitive solution. I'm running Windows 7 64 bit and my graphics card is a nvidia 9800 Gtx +. Whenever I try to update display drivers (I tried all the nvidia versions on their site for windows 7 64 bit drivers), during the restart I get the Windows Logo and then where he should go to the login screen, just blank with a slider that is mobile and never changes. I write of the same model, but I have just the driver value Standard VGA (Did it safemode). Any ideas?
  EDIT: I thought I might add, when I initially installed I had to use a friends video card to do finish, it would hang at the end of the installation. I swapped my card after the installation.

  I tried the drivers from EVGA, which is my card manufacturer. Not good. And on Windows 7 the default driver has not yet so why I had to standard VGA. I solved the problem by opting for an ATI Radeon HD 4870 instead, works perfectly. But it still bothers me that the drivers for the Nvidia card will not work with 64 bit vista or 7.

• T400 with Intel X4500HD graphics driver problem, also of fingerprint fingerprint reader driver

  Device Manager says:

  This device cannot start (code.10)

  To use standard VGA, although I downloaded article "Intel 4500MHD (Intel GM45 Express Chip)" to "Windows Vista (32 bit)" whitch I have file 7xd549ww.exe and installed! PCdoctor did the same thing - still nothing.

  What should I do to solve the problem?

  PS! The same is with fingerprint reader...

  Solved my problem of video - I've not read the installation manual.

  (After installing the package

  Specify SETUP.EXE with the full path name where you extracted the package     in the step 2, and click OK.     Example: C:\DRIVERS\WIN\DISPLAY\SETUP.EXE
  

  )

  Thanks, SURIYA

• Generic PnP Monitor driver problems

  I tried to print from my laptop and it won't let me. I think of network problems. The message indicates that the generic pilot pnp can be altered. I tried to solve this problem by trying to find a download or remove and reinstall. No luck. It is not a huge problem, but I like it to be resolved. There is no free site to scan computer and suggest corrections... I'm not going to pay for it. For any help or suggestion would be greatly appreciated.

  SR

  Your printing problem is most likely a driver.  Re-install the printer driver that you

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• -Portege Z10t 13 V graphic driver problems and lag with W10

  Hello

  Please excuse my bad English,

  I just bought the Z10t A 13V PT 141, with W8.1. This computer works fine on W8, but I want to install W10. I already tried 3 times but each time, the cursor (with the touch pad or mouse) is lagging behind, each movement is jerky and works very well. I tried to see if it was a driver problem and downloaded new drivers from Toshiba for the W10.

  I did the same thing with Intel drivers, but for graphics drivers, there is an error message: "a custom computer manufacturer driver is installed on your computer. The Intel driver update utiliy is not able to update the driver. Install a generic Intel driver instead of the driver from the computer manufacturer custom can cause technical problems. Contact your computer manufacturer for the latest driver for your computer.

  When I'm with W8, drivers are correctly updated...

  So I think that the cursor problem is due to this driver problem (I hope so, but I'm not sure). What is the solution? I'M alone with this problem?

  Thank you

  Thomas

  Hello Thomas,.

  EXACTLY the same problem here with my uograded Portege Z10t-A-140 to WIN 10.
  I also took the same steps and encountered the same problems and no solution.
  I find Toshiba after sale customer VERY INEFFECTIVE and disappointing, because it seems no way to get a support PROFESSIONAL from Toshiba on this issue (or any other for that matter).
  Note that I absolutely do not consider helping other users on a forum or self-help a form of professional support at all!
  -> Not happy with Toshiba!

• Reader of SD with Tecra M2 driver problem

  Hello

  I formatted my laptop: TECRA M2 PTM20E-0R1LZ-FR / PM 735

  I found all my drivers for all execpt for the SD reader componet.

  It was very difficult to find the SD host controller, but I finally found it:
  Toshiba Secure Digital host controller
  oem17.INF:Toshiba:SDHost:6.0.4058.0:pci\ven_1179&d ev_0805

  But now, when I insert my SD card, I have a problem with the SD reader driver.

  So, if anyone has an idea...

  I did all the forum, all the driver toshiba support page and nothing on that kind of driver.

  Thanks for your help.
  Kind regards
  xVZx

  What type of problem do you have when you insert the SD card?
  Do you use drivers from the Toshiba support page?
  Do you use took in charge a card SD (support capacity)?

• Driver problem with a dc7100 cmt

  I have a driver with my Hp dc7100 cmt tour 7 months ago, I upgraded Windows Xp pro to Windows 7 Edition System Home Premium, it was working fine... or so I thought, then week or so I did a Windows update that has problems starting

  Windows 7 upgrade advisor has been downloaded in my system, I started to have a driver problem he always tells me to update my drivers for systems, I well updated some drivers but I was not of the most important of them.  It is a Graphics driver (WDDW) driver for windows aero graphics would work my CD-Room go stale and USP port pilot who was also outdated... The player windows Media have also stopped...  He told me to contact my PC manufacturer or retailer to see it an upgrade is available, I've been looking and asking for two days... I hope someone reading this and can give me some advice on how I can get these updates, or tell me why I can't get HP... My goal is not to get out a purchase of a new system, but fix the one I have... as a student, my funds are very low!  Pease Help, thank you

  Hello:

  What graphics card you have in your PC?

  You mentioned Aero, and you wouldn't get Aero on a dc7100 with the integrated Intel graphics card.

  You'd only Aero, if you have a PCIe x 16 graphics card is windows 7 capable.

  If you have the Intel integrated video card, I got something that will install the video driver, but you won't have Aero.

  In addition, he will work for W7 32 bit.

  So, please post back and let me know what video card you have in the PC, because if it's an add-on, one, I would need to know the manufacturer and model.

  Paul

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• All of a sudden my monitor went black and came vertical back instead of horizonal. Driver problem?

  When installing a virus checker my mototor suddenly went black and came back with everything in a vertical rather than horizontal. My thought is that I

  now have a driver problem. What are the proposals?  Pete

  Hold down the Ctrl and Alt keys at the same time and use the arrows to rotate back.

• Change the problem of direction of the cursor with new 2nd monitor

  original title: problem of direction of the cursor with new 2nd monitor

  I just added a 2nd monitor to my computer. The 2nd monitor is left of my laptop but I have to move the cursor to the right in order to get on the new monitor. How can I change so I can just move my cursor to the left and get it on my new 2nd monitor?

  Right-click on the desktop and then clicking display settings by clicking Customize to open the display settings. In the display settings box, click and drag the image to the monitor 2 to the left of the screen 1. Click on the button apply, then check. Click Ok to exit.

• DRIVER PROBLEM WITH CANON SMARTBASE PC1210D when INSTALLING ON WINDOWS 7 RC 64 - bit EDITION

  I RECENTLY INSTALLED WINDOWS 7 RC 64 bit EDITION, WORKS FINE BUT IT WONT LET ME INSTALL MY CANON PRINTER DRIVER SMARTBASE PC1210D I HAVE TRIED to INSTALL all THE DRIVER FROM THE CANON SITE, ALSO WINDOWS UPDATE cannot FIND ANY DRIVER.
  I ALSO INSTALLED THIS PRINTER ON ANOTHER PC WITH WINDOWS XP (IN NETWORK) IT WORKS FINE ON WINDOWS XP, IT SAME USED LET ME INSTALL AS A NETWORK PRINTER SHARE.
  ANY HELP WOULD BE APPERICATED
  Thank you

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Link above is for Windows 7 Forums.

  This is the place to ask your questions Windows 7 partners.

  The driver problem is not to do with Microsoft.

  CANON has written drivers for their products.

  If CANON does not write a driver for your model of printer for Windows 7, there's no.

  Try a Vista of CANON printer driver. If no available Vista printer, or it does not work, you are out of luck.

  And gently, do NOT enter capitals,

  Here is the Vista Forums.

  See you soon. Mick Murphy - Microsoft partner