With an average of values table in a 2D space circular

Similar Questions

• Covered wagon with an average of analog voltages DAQmx

  I searched through screws, I can't seem to find something that will automatically average numbers of boxcar fed into it. I am trying to create a feature of my software that will allow the dynamic configuration of the car covered with an average of some inputs. I would like to avoid hard-coding tables which are filled/rotation etc etc.. Any help is appreciated

  Thank you

  If you use a Functional Global to store the values and call that VI of two different screws, you will access the same data. You could use two Global in the functional shift registers and use a selector to place / extract data from / to the appropriate shift register. Only VI call access one commune VI at the time, so one of the caller of the screw will be 'blocked' until the first caller is done. This does not usually work for data acquisition applications high speed.

  You might consider using named queues instead of functioning overall. You might be interested in this thread on the forums of LAVA that deals with boxcar implimentations. You create a queue for each data stream and can perform functions such as "preview" queue to get all items without actually removing them from the queue. If you use a LabVIEW 8.6, there is a new feature called with loss of queues. You set an upper limit on the size of the queue and "lossy enqueue" allows to add items at the end of the queue. If the queue fills up, then the oldest data element will be lost.

• With an average of the data output.

  Hello

  I am a new user of Labview. I need to write a labview program that will average my output in a single data data.

  Basically I have an XY graph which results in a table and the idea is to average the data points.

  This is the kind of program that I use.

  Thank you

  Mutah

  Hi Nicole,.

  You can index the table and use the average function (within the mathematics - probability and statistics). Then, you will get the average value of each table. If you want to see the averages in a table, then you can combine average values in a table again...

  Hope this help out you

• With an average of a spectral waveform and view / save

  Hello world!

  I am currently on a University project that consists on the use of Labview to obtain data and spectra of atmospheric plasmas using a spectrometer Ocean Optics HR4000.

  After not not using Labview for almost a year, I managed to get most of my knowledge back and I managed to display the spectral waveform, that I expect to get. However, as this is a fairly simple design I get a lot of noise and I would on average it for a graphic display more smooth.

  I looked into a lot of messages from the forum, but I couldn't really find what I was looking for.

  I also had a problem when you try to save the data and Spectra: I can't find anything in the directory of my VI.

  In the attachment you will find the current VI I'm trying.

  Thanks in advance for your answers!

  Jeremy

  I wrote an example for you below. This is an excerpt from VI, so you can drag the .png in your diagram and it becomes code. Pretend that everything in the green box is your Subvi spectrum acquisition.

  -Place the Subvi in a loop to run as many times as you like on average there

  -Out of the loop For is a table 2D with individual spectra on the lines

  -Transpose output, so individual spectra on the columns

  -Enter the table another loop to take the average rank by rank (with an average of different Spectra togeter).

  -Output is 1 d spectra average table

  

• with an average of 5 minutes of data - is no way

  I need average 5 minutes worth of data, save this average and then again on the next 5 minutes of data, with an average of this data block.  I tried to use the average function pt-pt in LabVIEW, but who seems to take an average continuous market, I do not want.  I probably read data once every 0.1 seconds, so I can not used stacked registers at offset, because it would be not very economical. I thought to build a table, but I don't know how to remove all the data at a time on average to it in an efficient manner, and more I'm stuck on the concept of re - create the table/clear the Board after five minutes of data has been collected, averaged and recorded.

  Does anyone have a suggestion?  I would really appreciate any advice or suggestions on how to go about it.

  Keep a running total in a shift register.  When your 5 minutes have expired, divide the sum by the number of samples taken, the sum to zero and start over.

• Not able to manage the value 'Table Type' in my procedure, humble need help here

  Hi all

  I am facing a problem with below pl/sql block. The time I run it it works fine, but when I run the procedure only from the exact values (hardcoded), it throws error as below.

  [Error] Execution (38: 1): ORA-06550: line 2, column 1:

  PLS-00306: wrong number or types of arguments in the call to 'CREATE_ABNORMAL_BY_TRADER '.

  ORA-06550: line 2, column 1:

  PL/SQL: Statement ignored

  What I understand problem is, I use a Type of table herewhich works very well with my Pl/Sql block, but do not work when I run the same procedure of the value hard-coded.

  Please guide me how to handle this situation.

  Pl/Sql block [works absolutely well]:

  Declare
  
  lv_eff_from_dt DATE;
  lv_eff_to_date DATE;
  v_severity_codes_wl param_tbl: = param_tbl();
  lv_algo_id_wl sagedbo.alerts.algo_id%TYPE;
  
  Begin
  
  lv_eff_from_dt: = sage_utility.get_transaction_date('EFF_FROM_DATE');  -' 05-Aug-2013. '
  lv_eff_to_date: = sage_utility.get_transaction_date('EFF_TO_DATE');       -' 04-sep-2013. '
  
  lv_algo_id_wl: = sage_utility.get_code_values('ALERT_MODELS','GRAY_LIST');  -GLABNORMAL

  v_severity_codes_wl: = sage_utility.get_multi_parameter_value(1,'SEVERITY_CODE_WL'); -4.5
  
  SONARDBO.sage_generate_alert.create_abnormal_by_trader (lv_algo_id_wl, v_severity_codes_wl, lv_eff_from_dt, lv_eff_to_date, 'US');

  End;

  Pl/Sql block [does not] (by the way the same values but hard)

  Begin

  SONARDBO.sage_generate_alert.create_abnormal_by_trader ('GLABNORMAL', '4', 5, 5 August 2013 ', ' 04-Sep-2013', 'US');

  End;

  Error PLS-00306: wrong number or types of arguments in the call to 'CREATE_ABNORMAL_BY_TRADER '.

  I'm sorry that my question is not so generic, you cannot run on your computer. How should just guide me with the concept, I treat the values in table hardcodedly? (For testing of use)

  Thank you very much

  If your passage of type table, then you will need to run as below

  Begin

  SONARDBO.sage_generate_alert.create_abnormal_by_trader ("GLABNORMAL", param_tbl (' 4 ', ' 5'), August 5, 2013 ', ' 04-Sep-2013', 'US');

  End

  Means that you must call with the table type ("' hard coded values"). Here is the simple test. Take a look at this

  SQL > CREATE or REPLACE the TYPE nt_tab IS TABLE OF VARCHAR2 (50);

  2.

  Type of creation.

  SQL > CREATE OR REPLACE PROCEDURE test_proc (p_nttab nt_tab)

  2 AS

  3 v_nttab nt_tab: = p_nttab;

  4 BEGIN

  5 FOR me in 1.v_nttab. COUNTY

  6 LOOP

  7 DBMS_OUTPUT. Put_line (v_nttab (i));

  8 END OF LOOP;

  9 END;

  10.

  Created procedure.

  -Perform the procedure with only one value of type table

  SQL > EXEC test_proc (nt_tab ('KING'));

  KING

  PL/SQL procedure successfully completed.

  -Run procedure with the multi-value table type

  SQL > EXEC test_proc (nt_tab ('KING', 'AAAA', 'BBBB'));

  KING

  ABDELKADER

  BENAMER

  PL/SQL procedure successfully completed.

  Post edited by: 000000

  Post edited by: 000000

• Please let me know how I can add a new column with a constraint not null, table already has data, without falling off the table... Please help me on this issue...

  Hello

  I have an emp_job_det with a, b, c columns table. Note that this TABLE ALREADY has DATA OF THESE COLUMNS

  IAM now add a new column "D" with forced not null

  Fistly I alter the table by adding the single column "D", if I do, the entire column would be created with alll of nulls for the column DEFAULT D

  ALTER table emp_job_det Add number D; -do note not null CONSTRAINT is not added

  Second... If I try to add the constraint not null, get an eoor as already conatained null values...

  (GOLD)

  In other words, if I put the query

  ALTER table emp_job_det Add number D NOT NULL; -THROWS ERROR AS TABLE ALREADY CONTAINS DATA

  So my question is how how can I add a new column with a constraint not null, table already has the data, without falling off the table

  Please help me on this issue...

  Add the column without constraint, then fill the column. Once all the rows in the table are given in the new column, and then add the constraint not null.

• Update the value Table B if table A the value of different

  Hi all
  I'm using Toad for Oracle and need assistance with a trigger. I have two tables tables A and B Table with some of the same fields. I want to only update the values in the array B, if the values in table A are not equal values in table B table A update. Don't update the record where the primary key of the Table equal to the foreign key in the Table B. I have a sample script below, I hope someone can give me an example, I can develop and test. Thanks for reading also.

  CREATE OR REPLACE TRIGGER AU_Table_A
  AFTER UPDATE ON Table_A
  FOR EACH ROW
  BEGIN
  If Table A :old.value != Table A :new.value
     then 
     update 
  --Update Table B value with Table A updated value
     Table B :old.value = Table A :new.value 
  where Table A primary key = Table B foreign key
  ............
  END IF;
  END;

  Published by: Nikki on December 6, 2011 07:50

  Hi Nikki,

  If I understand correctly, then maybe

  create or replace trigger au_table_a
    after update
    on table_a
    for each row
    when (old.value != new.value)
  begin
    update table_b
    set    table_b.value = :new.value
    where  table_b.foreign_key = :new.primary_key
        and table_b.value != :new.value;
  end au_table_a;
  /
  

  Note that the solution is not trying to handle NULL values. If you have NULL in to either A or B, we have to manage those specifically

  Concerning
  Peter

• Formation of a U8 command with input of data values

  Hi all

  I want to generate a U8 command with the given input values-

  Order is generated using parameters follwing the user would enter.

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Q2	PAGE			Constant			1ST QUARTER
  	P2	P1	P0
  0/1	These 3 bits form a page			0	0	0	0/1

  Where,

  1st quarter & Q2 are qualifiers whose value can be 0 or 1 binary.

  The PAGE of form P2, P1, P0 bits.

  Now, I want to develop a VI where user will enter Q1, Q2, and PAGE value of 0 x 0 to 0 x 7 and a U8 command should come from these three entries.

  For example. If Q2 = 0, T1 = 1 and PAGE = 0 x 5, then exit the VI should be a U8 command 0 x 51.

  I tried this using a function to reach the numbers, but it generates a U16 that is undesirable.

  So, I guess that this must be done using some of the techniques of handling bit as ANDing.

  Kindly help me in this regard.

  Best regards

  Snehal

  Hi Alain,

  two possible solutions:
  

• Difficult to scroll with the background color of table cell

  When I changed the background color of cell, the table has become difficult to achieve.

  And I can't finish change the cell background color, it takes forever.

  Anyone encountered this problem before?

  LabVIEW 2011 on WinXP.

  Hello Zou,.

  The problem is not with "background color of the cell.

  But the problem is with the "size of the Table!

  When the size of your table is huge, the windows + chart LabVIEW take longer to scroll.

  Attached VI may help you to experience the same. Change the size of the table and the roll of experience.

  Solution: -.

  1 initialize the Table for that size, if the size of your table is small.

  2. use a table (UI) + Scroll Bar (Manual from Numeric range) + internal buffer (block diagram), for the size of the huge table

  Kind regards

  Yogesh Redemptor

• Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew has been

  Hi, my old G5 died and now I need to download the version CS3 average Easrtern - my new Macook has no space for a CD. I have all my serial numbers. I was with the cat for hours - they sent me a link - but when I open the program - all the Hebrew was reversed. I need to ME version. Where should I go?  MANY thanks, Naomi

  The latest product from Adobe's creative cloud that we create no more any version of Creative Suite.

  You can check the availability of creative cloud subscriptions in your country from here: https://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-matrix.pdf

  Purchase at: pricing and membership creative cloud plans | Adobe Creative Cloud

  Also see, modify the language setting for Adobe Creative Cloud applications

  Let us know if that helps.

• Can I introduce a few relationships in data with the views and the Table maker?

  Hello. I have db with lots of views and tables. Can I introduce a few relationships in maker data with Tables and views? I have to configure PK and FK for my tables and views if I want to see relationships? I just started with the Data Modeler. Thank you for your help.

  Hello

  If you import your database Tables (Import / Data Dictionary), foreign keys defined in your database will be also imported.

  He is also a foreign key discovery tool in maker of data that can help you identify possible FK relationships and add them to your model.

  To use it, right click on the entry for your relational model in the tree view of the browser and select the foreign keys to discover on the menu drop down.

  Note that data Modeler does not support PKs and FKs on views.

  David

• Is it possible to create a document merge pdf and mailing to several vendors (each with their own unique values) for them to individual e-sign?

  Is it possible to create a document merge pdf and mailing to several vendors (each with their own unique values) for them to individual e-sign?

  I have my letter and the data that is created in Excel and Word, so I want to create these data in a mail merge (by Word) and then saved in PDF format.

  I wish that each document merged PDF mail to have their signature / title / name of fields as fields of e-sign.  Is this possible? How can I configure my document as well what happends without me one in and edit every PDF document.

  Thank you ~.

  Hello Gallienterprises,

  It seems that you are looking to extract the values of your CSV file in the document of the multiple signatories. For this, you can use the MegaSign feature:

  https://helpx.Adobe.com/content/help/en/document-cloud/help/sending-megasign-using-CSV-fil.html

  Let me know if you need more information.

  Kind regards

  -Usman

• RICs when MergeTable using with the names of multiple tables

  Hello world!

  I just saw, as v11 OWM MergeTable media with the names of multiple tables. As I couldn't find anything in the documentation, here's a question:

  It also means, that RICs are automatically taken into account regarding the order of INSERTS/CHANGES/DELETES?

  That would actually really great and simplify the merge of our application mechanism a lot.

  Kind regards

  Andreas

  Hi Andreas,

  This feature works the same MergeWorkspace, but with a smaller set of tables.  Tables will always be merged into the order of the child table first, then the parent tables.  However, foreign key constraints are not validated until all tables have been merged.  This would prevent a mistake to be triggered when the child table merging before the parent merging table data in the parent workspace.

  Kind regards

  Ben

• How to create the table with the description of the table

  Hello

  I would like to create the array with the description of the table (such as the creation of package or procedure with comments).

  Is it possible to achieve thanks to the oracle, if possible please help me achieve this goal.

  Thank you and best regards,

  Ibrahim Sayyed.

  > create table test (col1 number);

  > comment table test is "about a comment ';

  > select comments from user_tab_comments where table_name = 'TEST ';

  COMMENTS
  ____________________________________________________________________
  This is a comment