With direct supply through Griffin PowerBlock load LifeDrive. Can it be done?

Similar Questions

• status/location indicator (says wait, communicate with, etc.) through the bottom went, how can I get it back?

  I can't find out where it made the line that indicates what Firefox is doing for. It is usually said things like, ' waiting for the response of ', 'load', 'done '. I rely on the status bar much and I don't know what it's called, or where he went. Can anyone help?

  See view > status bar [X]

• Pavilion g series 1016-tx: with a burned (more likely) display card, I can't get done recovery without getting a blue screen

  Hello all, I have this old laptop that has one of these double called graphics cards. Unfortunately the ATI you won't work after a few years, I get blue screen when you try to start. I disabled the ATI display driver, and he worked well with the integrated INTEL card.

  And then I tried to restore the thing to factory default settings by using the Recovery Manager. Once more I am getting blue screen when you try to start, which means I can't get the recovery made. And this time I won't be able to boot in safe mode to disable the display driver.

  Any help?

  Hi @JonJon ,

  Welcome to the HP Forum! Is a great place to find answers and advice! You have the best experience on the HP forum, I would like to draw your attention to the Guide of the HP Forums. First time here? Learn how to publish and more.

  I understand that you have a failed graphics card that overcame you by turning off that one and using the integrated card, when you tried to perform a recovery, that he had failed as a result of the card, recovery won't work due to the fact that it tests the equipment prior to installation and of course it will detect the problem.  I don't know, but after talking with a colleague, you should be able to install from a disk of Windows, but I am not sure. You may be able to download Windows from the web, if this is not possible, it would be probably more cost-effective to replace Notepad.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek. "In addition, by clicking on the" ""Twww.Mountainview.rsb.qc.ca Up ' below is a great way to say thank you!

• Horizon 6.0 HTML Blast connection through an A10 load balancer?

  Hey all.

  After a recent update to 6.0.0 of 5.1, we seek to get HTML Blast connections operation.  We are routing our PCoIP connections through an A10 load balancer.  Now, I'm not the person of networking which set up but from my understanding, we have a VIP configuration for port 443 for our two servers for connection.  With the help of the A10, we set up a second VIP with two connection for port 8443 servers.  Load balanced connections to https://myfriendlyname.domain.com half of the working time.  The time, they do not work you can access the destination page, connection, choose the pool, and then page cannot be displayed or couldn't resolve proxy in Chrome.  If you go to the #2 server directly by going to https://server_name , it works fine.  If you go to the #1 server by going to https://server_name/ it does not work.  Both in the Horizon view Admin > servers > server connection > edit > Blast external URLS are https://myfriendlyname.domain.com/: 8443.  If you change this to the individual server, server #1 will always work.  Just like the #2 server.  So I tell myself, is not a thing of VMware, but something of the A10.  I know that a connection initiated on port 443 must be the same server, generating the connection on port 8443, otherwise it will go down.  I checked with our team of networking and check that the permanent sessions are enabled.  We went over a few rounds with A10 and they encountered no HTLM Blast before.  I saw a few workarounds for F5, but nothing for the A10.

  Does anyone have experience with getting this work with A10?

  Thank you.

  Another updated.  We have allowed the persistence of server on the VIP and that solved the problem.

• I have just Setup iPhone 3GS from my wife. Through iTunes, I loaded music, Photos, Contacts, and calendar. There is no Photos icon on the screen. They are responsible because appear it as choices in the selection of paper painted. help please. Thank you.

  I have just Setup iPhone 3GS from my wife. I.O.S. 6.1.6. Through iTunes, I loaded music, Photos, Contacts, and calendar. There is no 'Photos' icon on the screen. The photos are loaded because appear it as choices in the selection of wallpaper. I would be grateful for any help with this. Thank you.

  Jimbo1307 wrote:

  I have just Setup iPhone 3GS from my wife. I.O.S. 6.1.6. Through iTunes, I loaded music, Photos, Contacts, and calendar. There is no 'Photos' icon on the screen. The photos are loaded because appear it as choices in the selection of wallpaper. I would be grateful for any help with this. Thank you.

  Double check the app folder or home screen.

  Cannot delete the built-in app, so go to settings - general - reset - Reset available to the home screen.

• HP LaserJet M425dn MFP 400: This product number is not associated with the supplied serial number.

  I'm checking the the warranty status of my M425dn.

  The warranty registration page, I enter my serial number and click on submit. Website "this product can be identified by the serial number only. Please enter a product number below or change the serial number above. »

  I then enter the number of related product as shown on the back label of the device: CF286A. I click send again. Now the page returns "this product number is not associated with the supplied serial number. Please check your records and make any necessary changes. »

  I have triple checked my serial number and product number. I so need to know the status of the guarantee of this device. What should I do?

  Yes, I am aware of the presentation of the printer and where are product information stickers. In fact, I have pictures of the thumbnails so that I can refer to them without having to look at the back of the unit whenever I need something.

  (In most circumstances, I could use web interface of the device to get information. "(But for some reason, the number of product is not included in the page of information of the device web interface... or any other page)."

  My unit sticker clearly shows CF286A without extra character.

  However, I now know why I have a problem. After stop HP 800-474-6836 support (moved to 800-334-5144) and passing through the quick second support 75 (don't fall for the trick of being told to go online - wait around 10 seconds of silence for the next part of the guest and eventually you will get to the point ask the bot to phone the model information), I was able to speak to a representative very nice who understood that my camera was a replacement warranty and the warranty replacement serial number has never been activated. She finds my serial number with the original purchase of a previous file number, activated the serial number of replacement and after a brief support is now send me another replacement aircraft, from one day to the next day, free of charge.

  It is regrettable that this model has been nothing else into trouble, but it's good to know that the warranty service is not too difficult.

• Red circle with a line through

  I look a my email, hit something on my keyboard and I had a red circle with a line through it on my email that I look one including all the others with the same subject / receiver. Now, emails are no longer there and I have not received all messages from this person either, at least not through Thunderbird. I don't know what I did. Any help is greatly appreciated.

  Thank you

  Mark

  See Menu (Alt + V) > discussions > ignored threads

  See https://support.mozilla.org/en-US/kb/ignore-threads

• I recently opened firefox and the lower half of the page is filled with directions to Custom Search Menu Wizard

  I recently opened firefox and the lower half of the page is filled with directions to Custom Search Menu Wizard tried everything and cannot figure out how to get it out. With the help of 3.6.26 version. The status bar is just above Directions, I tried closing all toolbars and nothing gets rid of it. Help, please

  It seems that a recent update of Fast Video Download (with SearchMenu) 4.1.5 broke the version of Firefox 3.6 on their module. You can upgrade to the latest version of Firefox to:
  
  http://www.Mozilla.org/Firefox

  https://support.Mozilla.org/en-us/questions/915364

  https://support.Mozilla.org/en-us/questions/915355

• Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug? Thank you

  Are you aware of a possible bug in the version 3.6.23? In the browser, for example, "two /" appears with the slash through the 'o'. Is this a known bug?

  When the same text is seen in another browser, it is displayed correctly as "two."

  The same question is displayed on another computer.

  Thank you.

  Sounds that you use a font that supports ligatures (Palatino?).

  • http://en.Wikipedia.org/wiki/Ligature_%28typography%29

• I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help?

  I can't create a shortcut to the site on my desktop, when I click on the url bar I can drag on the browser to open a new, but as I drag him on my desktop I get the circle with the line through it, one that looks like a no entry sign. Help

  Try to drag the image to id web site (favicon) on the left side of the address bar, instead of the URL.

• A black bar with directions appears - how can you eliminate?

  It's a narrow bar with half circles on the ends. Directions are also spoken. The bar can be shortened, but not deleted or trashed.
  It appeared a week after that I must have turned it on.

  This?

  You might pass on the VoiceOver Accessibility feature (System-> Speech Preferences; (fn) Cmd - F5)

  • http://guides.MacRumors.com/System_Preferences#speech

• Market with power supply is not possible on the Satellite M60-167

  Hello

  I'm sorry for my English saw. I have a problem with my Satellite M60-167. When I have connected the laptop with power supply and press the 'Power', then does'nt start Notepad.
  When I use only the battery and push a lot of times the "Power Button", that the laptop will be started.
  Question: It is a problem of material or not. This laptop that I bought it in January 2006.

  Can you help me?
  Thank you very much for your theory.

  AX.

  Hi Axel

  My theory is that there may be some problem with button / stop himself (white metal under the button), or perhaps with several Planar cable wire.

  Also, for me it is definitely hardware problem. If you want, you can contact the partner of service allowed in your country and see what they have to say about it.

• Icon has a circle with a line through it, so I can't move the icon to dock... why? Fix > |?

  Icon of Firefox which is shown to go in my applications folder
  a circle with a line through it, which does not allow me to drag the icon
  in my dock for us opening and closing of browser... why? And how
  can I get rid of this circle?

  I deleted an earlier version of FFox so I hae no icon to open with.
  I get message that says Ffox can not open - please help.

  thx. weidner
  

  http://www.Mozilla.com/en-us/Firefox/4.0/system-requirements/
  
  Mozilla Firefox 4.0 does not support Mac PPC or versions prior to 10.5.

  For older Macs that are not considered supported in Firefox 4.0, try TenFourFox for PowerPC in performance Mac 10.4.11 and 10.5.8.
  
  http://www.floodgap.com/software/tenfourfox/

• Direct mail has now combined my husbands contacts with mine and also its calendar. How can I get these deleted without having to individually?

  combination unwanted contacts

  I sent an email from my husbands computer after signing with my info.  Direct mail has now combined its contacts with mine and also its calendar.  How can I get these deleted without having to individually?

  The contacts and calendar are associated with the Live ID used to sign in with. When you view your Inbox, press Ctrl-Shift-O for Options. On the connection tab, click on stop signing in. Now, check the contacts and calendar.

  Noel

• I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials.

  I recently took a class of Microsoft and received the "Welcome" e-mail, but could not connect with the supplied credentials (example below):

  Your MC ID: xxxxxxx

  Your temporary access code: 18995EBE-BDAF-4883-8F95-64D18D261848

  I created a new account with the e-mail MC ID has been sent and it was not recognized.  I would like to merge (link) the news and be able to get a fresh copy of my cert.  Thank you.

  Hello

  I suggest you contact Microsoft Learning support team to improve assistance:

  http://www.Microsoft.com/learning/en/us/help/assisted-support.aspx