Similar Questions

• POS 5.5 could not obtain data with analytical performance data warehouses

  Hi all

  I have two devices POS running version: 5.5.5.180.

  All of a sudden I can not connect to the Web Client for each device.

  POS status show all services in green on the two Pdvs.

  root@vdp:~/#: dpnctl status all
  Identity added: /home/dpn/.ssh/dpnid (/home/dpn/.ssh/dpnid)
  dpnctl: INFO: gsan status: up
  dpnctl: INFO: MCS status: up.
  dpnctl: INFO: Backup scheduler status: up.
  dpnctl: INFO: axionfs status: up.
  dpnctl: INFO: Maintenance windows scheduler status: enabled.
  dpnctl: INFO: Unattended startup status: enabled.
  
  

  By clicking on the Storage tab, displays the error message: "Unable to get data with analytical performance data warehouses" and no data warehouses are listed.

  • VCenter restarts, Pdvs, doesn't change anything.
  • I can connect to Pdvs very well.
  • CP are created.

  I found similar topics but no response... (POS 5.5 ERROR)

  Open a support case and turned out that the POS password user (a user defined in the domain of the @vsphere.local) that was used to access the vCenter has expired. Apparently, there's a bug in vCenter for some versions that makes them expire in 65 days.

• ESXi 5.1 and VMFS-3 data warehouses

  We have an existing environment to ESX 3.5 Update 5 7 host and an EMC CX3-10 x iSCSI SAN. We go to decomission 2 ESX hosts and replace them with hardware ESXi 5.1 and recent guests. We realize that we no longer able to manage these hosts ESXi from our Virtual Center 2.5 console, but these two hosts will run a minimum number of virtual machines (Exchange 2010 multirole) that don't use VMotion, DRS and HA.

  Our understanding is that ESX5.1 can see and use VMFS-3 data warehouses. Is it true that, once we plugged the new 5.1 ESXi hosts to our SAN and you can see all the existing LUN that we should be able to stop the virtual machines on two ESX 3.5 hosts and start the virtual machines on the host ESX 5.1 computers?

  Everyone has problems running ESXi 5.1 with VMFS-3 data warehouses?

  Some data warehouses VMFS-3 existing could be improved to VMFS-5 because they are only used by the virtual machines that work on 5.1 ESXi hosts. But some of the data warehouses VMFS-3 existing is not extensible because they are used by the virtual machines running on ESX 3.5 other hosts. In other words, a single virtual machine can have virtual drives running on the VMFS-3 and VMFS-5 warehouses of data at the same time?

  Thank you

  Jay

  VMFS version isn't a problem. What I am more concerned by the fact that your storage system is not supported by ESXi 5.1.

  André

• SRM and vSphere dedicated HA of data warehouses

  Hello

  When you use VMware HA and SRM, may that MRS will failover data warehouses to the recovery site, the host HA heartbeat? Locking issues was born when HA uses the data store and SRM wants to failover the data store?

  Gabrié

  Yes they can-

• List VMFS version and block size of all data warehouses

  I'm looking for a PowerShell script (or preferably one-liner) list all with version number data warehouses there VMFS and their blocksizes.

  I am a novice PowerShell and ViToolkit, but I know how to do the following:

  I can list all data stores that begin with a specific name and sort by alphabetical order:

  Get-Datastore-name eva * | Sorting

  Name FreeSpaceMB CapacityMB

  EVA01VMFS01 511744 81552

  511178 511744 EVA01VMFS02

  511744 155143 EVA01VMFS03

  EVA01VMFS04 511744 76301

  301781 511744 EVA01VMFS05

  etc...

  I can get the Info for a specific data store with the following commands:

  $objDataStore = get-Datastore-name 'EVA01VMFS01 '.

  $objDataStore | Format-List

  DatacenterId: Data center-data center-21

  ParentFolderId: File-group-s24

  DatastoreBrowserPath: vmstores:\vCenter-test.local@443\DataCenter\EVA01VMFS01

  FreeSpaceMB: 81552

  CapacityMB: 511744

  Accessible: true

  Type: VMFS

  ID: Datastore-datastore-330

  Name: EVA01VMFS01

  But that's all as far as my knowledge goes.

  Someone out there who could help me with this one?

  This information is not available in the default properties of the DatastoreImpl object.

  But this information is available in the SDK object called a data store.

  You can view these values like this.

  Get-Datastore | Get-View | Select-Object Name,
                                      @{N="VMFS version";E={$_.Info.Vmfs.Version}},
                                      @{N="BlocksizeMB";E={$_.Info.Vmfs.BlockSizeMB}}
  

  If you are using PowerCLI 4.1, you can check with

  Get-PowerCLIVersion
  

  Then, you can use the New-VIProperty cmdlet.

  Something like that

  New-VIProperty -Name VMFSVersion -ObjectType Datastore `
       -Value {
            param($ds)
  
            $ds.ExtensionData.Info.Vmfs.Version
       } `
       -BasedONextensionProperty 'Info' `
       -Force
  
  New-VIProperty -Name VMFSBlockSizeMB -ObjectType Datastore `
       -Value {
            param($ds)
  
            $ds.ExtensionData.Info.Vmfs.BlockSizeMB
       } `
       -BasedONextensionProperty 'Info' `
       -Force
  
  Get-Datastore | Select Name,VMFSVersion,VMFSBlockSizeMB
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Formatted VMFS3 ISCSI data warehouses are compatible with ESX5.5?

  Hi all

  I'm currently building an ESX 5.5 environment to run in parallel with my environment 4.1 existing and need the new 5.5 ESX servers to connect via iSCSI to a couple of VMFS3 formatted lun.

  I can't see them via the iSCSI storage adapter, but when I try to mount it asks me to format first. I wanted to confirm if anyone else had this problem or has confirmed that VMFS3 is fully compatible with ESX 5.5 connected via iSCSI.

  Thanks in advance.

  Looks like that the MTU on my NICs is set too high. Once I lowered around 1500, they began to present correct data warehouses.

  Thanks for the help, I think I have a handle on it.

  Thank you, MP.

• If I put in place an openfiler VM as a data store iSCSI & vmfs on two ESXi hosts, both ESXi hosts can access two data warehouses?

  If I put in place an openfiler VM as a data store iSCSI & vmfs on two ESXi hosts, both ESXi hosts can access two data warehouses?

  The reason why I ask, is that I have two hosts ESXi ESXi 4 running.  I do my backups with ghettoVCB, which I modified to create thin backups on one of the drives the.  I then wput them to the server, which causes them to become thick.  Directly targets the backup in a vmfs iSCSI on the server in the face shop.  It would save a step and the vmdk backup should remain thin.

  Thank you!

  The short answer is Yes. If you allow the ESX servers to see the LUN. This setting is configured to the Openfiler.

• Create schemas for data warehouse for Reporting with Oracle XE

  It is possible to import home charger with the Oracle XE database and dw?

  I get this error ORA-00439: feature not enabled not: progress of replication in the log of the CIM.

  I saw that the database, we do not have have the feature "advanced replication."

  SQL> select * from v $ option where parameter = 'Advanced replication';
  
  
  PARAMETER
  -------------------------------------------------- --------------
  VALUE
  -------------------------------------------------- --------------
  advanced replication
  FALSE
  
  
  

  Journal of the CIM:

  Mon Feb 23 14:16 BRT 2015 1424711760686 atg.cim.database.dbsetup.CimDBJobManager module of high level of information for Reporting data warehouse Datasource list page: domain controllers. DW, ARF. DW.base, ARF. DW. InternalUsers, Store.Storefront

  Info my Feb 23 14:16:05 BRT 2015 1424711765012 atg.cim.database.dbsetup.CimDBJobManager 0 0 imports has not been executed.

  Info my Feb 23 14:16:05 BRT 2015 1424711765192 atg.cim.database.dbsetup.CimDBJobManager list of module level for Datasource Reporting charger: DafEar.Admin, DCS. DW, DCS. PublishingAgent, ARF.base, Store.EStore, Store.EStore.International

  Info my Feb 23 14:16:05 BRT 2015 1424711765733 atg.cim.database.dbsetup.CimDBJobManager 1 1 imports has not been executed.

  Info my Feb 23 14:16:05 BRT 2015 1424711765953 atg.cim.database.dbsetup.CimDBJobManager list of top level for Datasource Publishing module: DCS - UI. Versioned, BIZUI, PubPortlet, DafEar.admin, DCS - UI. SiteAdmin.Versioned, SiteAdmin.Versioned, DCS. Versioned, DCS - UI, Store.EStore.Versioned, Store.Storefront, DAF. Endeca.Index.Versioned, DCS. Endeca.Index.Versioned, ARF.base, DCS. Endeca.Index.SKUIndexing, Store.EStore.International.Versioned, Store.Mobile, Store.Mobile.Versioned, Store.Endeca.International, Store.KnowledgeBase.International, Portal.paf, Store.Storefront

  Info my Feb 23 14:16:11 BRT 2015 1424711771561 atg.cim.database.dbsetup.CimDBJobManager 65 65 imports has not been executed.

  Info my Feb 23 14:16:11 BRT 2015 1424711771722 atg.cim.database.dbsetup.CimDBJobManager list of top level for Datasource Production Core module: Store.EStore.International, DafEar.Admin, DPS, DSS, DCS. PublishingAgent, DCS. AbandonedOrderServices, DAF. Endeca.Index, DCS. Endeca.Index, Store.Endeca.Index, DAF. Endeca.Assembler, ARF.base, PublishingAgent, DCS. Endeca.Index.SKUIndexing,Store.Storefront,Store.EStore.International,Store.Recommendations,Store.Mobile,Store.Endeca.International,Store.Fluoroscope,Store.KnowledgeBase.International,Store.Mobile.Recommendations,Store.Mobile.International,Store.EStore,Store.Recommendations.International

  Info my Feb 23 14:16:12 1424711772473 2015 BRT atg.cim.database.dbsetup.CimDBJobManager 30 30 imports has not been executed.

  Info my Feb 23 14:16:19 BRT 2015 1424711779573 atg.cim.database.dbsetup.CimDBJobManager creating schema to the Reporting data warehouse data source

  Info my Feb 23 14:16:19 BRT 2015 1424711779653 atg.cim.database.dbsetup.CimDBJobManager list of top level for Datasource Reporting data warehouse module: domain controllers. DW, ARF. DW.base, ARF. DW. InternalUsers, Store.Storefront

  Info my Feb 23 14:16:19 BRT 2015 1424711779993 atg.cim.database.dbsetup.CimDBJobManager DatabaseTask Create for Module ARF. DW.base, sql/db_components/oracle/arf_ddl.sql

  Info my Feb 23 14:16:19 BRT 2015 1424711779993 atg.cim.database.dbsetup.CimDBJobManager DatabaseTask Create for Module ARF. DW.base, sql/db_components/oracle/arf_view_ddl.sql

  Info my Feb 23 14:16:19 BRT 2015 1424711779993 atg.cim.database.dbsetup.CimDBJobManager DatabaseTask Create for Module ARF. DW.base, sql/db_components/oracle/arf_init.sql

  Info my Feb 23 14:16:19 BRT 2015 1424711779993 atg.cim.database.dbsetup.CimDBJobManager Create DatabaseTask Module domain controller. DW, sql/db_components/oracle/arf_dcs_ddl.sql

  Info my Feb 23 14:16:19 BRT 2015 1424711779993 atg.cim.database.dbsetup.CimDBJobManager Create DatabaseTask Module domain controller. DW, sql/db_components/oracle/arf_dcs_view_ddl.sql * info my Feb 23 14:16:19 BRT 2015 1424711779993 atg.cim.database.dbsetup.CimDBJobManager Create DatabaseTask Module domain controller. DW, sql/db_components/oracle/arf_dcs_init.sql

  Info my Feb 23 14:16:21 atg.cim.database.dbsetup.CimDBJobManager BRT 2015 1424711781085 found 2 of the 6 unrun previously of tasks for Datasource Reporting data warehouse

  Info my Feb 23 14:16:21 BRT 2015 1424711781085 atg.cim.database.dbsetup.CimDBJobManager 1 ARF. DW.base: sql/db_components/oracle/arf_view_ddl.sql

  Info my Feb 23 14:16:21 atg.cim.database.dbsetup.CimDBJobManager 1424711781085 2015 BRT 2 domain controllers. DW: sql/db_components/oracle/arf_dcs_view_ddl.sql

  Info my Feb 23 14:16:21 BRT 2015 1424711781085/atg/dynamo/dbsetup/job/DatabaseJobManager starting work of setting up data 1424711781085.

  Error my Feb 23 14:16:21 BRT 2015 1424711781516 /atg/dynamo/dbsetup/database/DatabaseOperationManager---java.sql.SQLException: ORA-00439: feature not enabled not: Advanced replication

  is there a solution?

  Hello

  We have not tested and certified with Oracle XE internally

  You must use an Oracle Enterprise Edition for Advanced Replication

  What version of Oracle trade you install, I can't say extract of newspaper, you've posted

  ++++

  Thank you

  Gareth

  Please indicate any update as "Good response" or "Useful answer" If this update help and answers your question, so that others can identify the correct/good update between the many updates.

• Can you pass offline virtual machines between data warehouses using the 'Migration' with the basic Kit Essentials feature?

  I speak not of Essentials Plus vMotion between hosts or migration of VMS between hosts and data warehouses online. Just curious to know if its possible to off a virtual machine and click the button to migrate to another store of data with the basic Essentials bundle.

  Welcome to the community - Yes you can - it's what we call a cold migration.

• The E-mail Message body dynamics PowerShell/PowerCLI with data warehouses

  Hello what follows is related to this e-mail, but I'm stuck at the rounding of numbers

  The E-mail Message body dynamics PowerShell/PowerCLI

  I get an email with the following information:

  Datastore HealthCheck vCenter
  
  Available data store space
  UsedGB data store                                 Free GB                                 Perc Free
  Name1 273.30078125                         274.25                                    99%
  name2 273.30078125                         274.25                                    99%
  Name3 268.466796875                         274.25                                    99%
  name4 273.30078125                         274.25                                    99%

  Three things I'm stuck: the value UsedGB, woud have first with only two decimal points instead of having 273.30078125, nice to have 273.30. Secondly I do not receive the right percentage. Third: How can I sort the free Perf in the percentage values lowest for the greater? Thanks for your help

  Code:

  $msg. Object = "vCenter Datastore health CompanyvCenter.

  $array0 = @)

  $array1 = @)

  $array2 = @)

  Start-sleep 1

  to connect-VIServer $vcserver

  $array0 += get-Datastore. Select-Object - ExpandProperty name

  $array1 += get-Datastore. Select-Object - ExpandProperty FreeSpaceGB

  $array2 = get-Datastore. Select-Object - ExpandProperty CapacityGB

  $UsedSpace = [math]: tour (($array2 [$i]-$array1[$i]), 2)

  $PercFree = [math]: Round ((100 * $array1 [$i] / $array2[$i]), 0)

  $String0 = ' $PercFree$ %.

  $i = 0

  $j = 0

  # Header

  $msg. Body += "< FONT COLOR = black > Datastore HealthCheck CompanyvCenter < / POLICE > < BR > < BR >".

  # Datastore header

  $msg. Body += "< B > < FONT COLOR = black > Datastore space available < / POLICE > < / b > < BR >".

  $msg. Body += "< B > < COLOR of FONT = black > Datastore < / POLICE > < / b > < B > < FONT COLOR = black > UsedGB < / POLICE > < / b > '."

  < B > < FONT COLOR = black > free GB < / FONT > < / b > '

  "< B > < FONT COLOR = black > free Perc < / POLICE > < /B >.

  # Datasores

  0. ($array0.) Count-1) | %{

  $msg. Body += "< BR > < DO COLOR = Black > ' + $array0 [$_]

  $msg. Body += "< / FONT > < FONT COLOR = Black >" + [math]: tour (($array2 [$_]-$array1[$_]), 2)

  #$msg. Body += ' < / POLICE > < DO COLOR = Black > ' + $array1 [$_]

  $msg. Body += ' < / POLICE > < COLOR of POLICE black = > ' + $array2 [$_] + ' < / POLICE >.

  #$msg. Body += "< / FONT > < FONT COLOR = black >" + [math]: tour (($array2 [$_]-$array1[$_]), 2) + "< station >"

  $msg. {"Body +=" "< ARE COLOR = Black >" + [math]: round ((100 * $array1 [$i] / $array2 [$i]), 0) + "$Percent" + "< / FONT > < BR >"}

  $msg. Attachments.Add ($att1)

  $msg. IsBodyHTML = $true

  $smtp. Send ($MSG)

  $att1. Dispose()

  Disconnect-VIServer $vcserver - confirm: $false

  #Here configure your paraneters

  $SMTPServer = "Exchange".

  $MailSubject = 'vCenter Datastore health CompanyvCenter.

  $Email = "[email protected]".

  function {Set-AlternatingCSSClasses

  (param

  [string] $HTMLFragment,

  [string] $CSSEvenClass,

  [string] $CssOddClass

  )

  [xml] $xml = $HTMLFragment

  $table = $xml. SelectSingleNode ('table')

  $classname = $CSSOddClass

  {foreach ($tr in $table.tr)}

  If ($classname - eq $CSSEvenClass) {$classname = $CssOddClass}

  else {$classname = $CSSEvenClass}

  $class = $xml. CreateAttribute ('class')

  $class.value = $classname

  $tr.attributes.append ($class) | Out-null

  }

  $xml.innerxml | out-string

  }

  Function report-Datastore {}

  $output = @)

  Get-Datastore. % {

  $props = [ordered]@{'Name'=$_. Name;

  "UsedSpace' = [math]: Round (($_.)) CapacityGB - $_. (FreeSpaceGB), 2);

  "PercFree" = [math]: Round ((100 * ($_.))) FreeSpaceGB / $_. {(CapacityGB)), 0)}

  $output += new-Object - TypeName PSCUstomObject-property $props

  }

  $output

  }

  "$style = @".

  "@

  #Connect to Vcenter

  SE connect-VIServer $vcserver

  # Trnasform the object in the HTML

  $html_DS = report-Datastore.

  Sort-Object PercFree |

  ConvertTo-HTML-Fragment |

  Out-string.

  Game-AlternatingCSSClasses - CSSEvenClass 'even' - CssOddClass 'odd '.

  $html_DS ="

  Data warehouses

  $html_DS ".

  $params = @{'head' ='$style ';

  ««PreContent =»

  HealthCheck CompanyvCenter data store

  ";

  "PostContent' = $html_DS}

  # Send email

  Send-MailMessage-to $Email - subject $MailSubject-BodyAsHtml (ConvertTo-HTML @params) body - SmtpServer $SMTPServer

  # Disconnect Vcenter

  Disconnect-VIServer $vcserver - confirm: $false

• [SRM 4.1] Dealing with local data warehouses?

  Hello

  I'm currently loaded with SRM 4.1 installation on our companys vsphere and while I did this before that I have never worked with VM on local data warehouses. There are three additional centers for both, I'll be tipping. These three data centers all run on Cisco UCS 210 M2 servers spread across two data stores. The virtual machine can be found on the second partition of the UCS VMFS.

  I don't know why it was created this way that I wasn't there when it was put into service (it seems strange, though, as they have a shedload of space on the Symmetrix). So I ask really (a person with a more experienced eye), what are the options for local data warehouses with MRS? I'm guessing limited to no support... so think I might watch svMotion

  Thanks for any advice.

  Hello

  With MRS. 4.1, the only option is based on the Bay of replication, i.e. SRM is only able to protect virtual machines residing on storage arrays supported with replication configured between them. SRM itself does not perform the replication. SRM is able to display your replica equipment and perform a few operations on the Bay of storage through the SRA (storage replication adapter) - software written by the storage provider.

  Yes, unless you use a storage device which can present these local data warehouses such as those shared and replicate them on the (and is supported with SRM), you cannot use local data warehouses. I have a limited knowledge of such things, maybe the other guys will be able to help more.

  In SRM 5 extra option has been introduced - vSphere replication, which allows the replication of virtual machines between ESXi hosts. You will need vcenter / SRM and ESXi 5 for this to work.

  I do not understand your configuration. How many centres of data do you have? SRM only supports the scenarios one to one, and many-to-one.

  Michael.

• New analysis of data warehouses... at the level of the Cluster with PowerCLI 5?

  Hello

  Since vSphere has been provided (I think) the option to open a new analysis of the HBA on every host in the cluster ESXs is available in the GUI if you click with the right button on the cluster, select analyze again to data warehouses.

  I have read several threads from people requesting this option in Powercli but have not found a solution for this.

  When you do Get-Cluster-name | Get-vmhost | Get-vmhoststorage - RescanAllHBA to do this, the new analysis a host once in the cluster.

  Is there a solution for this now in PowerCLI 5.0?

  BR

  Henrik

  As far as I know, there is still no option to launch the new analysis across the cluster in paralel.

• Performance of BI with warehouse data or data warehouse.

  Hi gurus,
  
  Anyone here have a document or presentation to compare a BI performance which is implemented with the warehouse database or data warehouse?
  
  Appreciate your help :)

  You need to come to a conclusion of performance tests.

  The query can also have different points of view;

  1 compare the performance on obtaining data directly from the source systems against obtaining data accumulated in a single database.
  2. by comparing the performance on obtaining data from a standard model against data from a dimensional model.

  In most cases; getting data from data warehouses should give better performance since then.
  Data warehouses allocate more resources toward BI systems.
  Source systems serve much purpose other than BI systems; If resources are shared.
  In a data warehouse for data sets are already in the same place, reducing the latency of the network.
  Data warehouse stores summary information.
  Data warehouses are implemented with three-dimensional models which serves best for the BI queries.

• VM with disks of different data warehouses. Snapshots on the same data store?

  Hello

  We have several virtual machines with disks on different data stores for reasons RAID.

  Last night, we found that the snapshots of all disks are left on the data store main vmx and not on each datastore disk.

  How will we change this as our OS data warehouses are small and run out of space when running shadow copies?

  Thank you

  Frogbeef

  You can change the location of snapshots, but they will all go to this place - as far as I know, you cannot change the location of each disk.

  The KB http://kb.vmware.com/kb/1002929 explains how to do this.

  Kind regards

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• Can't see the iSCSI data warehouses after reboot

  I have 2 ESX 3.5.0 u3 hosts running on Dell PowerEdge 2950 servers and connect to a Dell PowerVault MD3000i. Recently, I upgraded the MD3000i gen.2 firmware, and after the upgrade, one of the MD3000i controllers began to experience extremely slow (3-4 MB/s) write to its LUNS assigned speed. Dell support reviewed my setup and said I have a configuration problem - all 4 of the MD3000i ports are on the same subnet, while according to them, they should be divided into two subnets. I have interruption scheduled for this Saturday, close all virtual machines, added an additional VMkernel port and a service console for the new subnet on each host, removed addresses for two of the ports of discovery dynamic and restarted the two hosts. When they restarted, I changed the IP address on a single port on each controller. The servers came, restored 4-port iSCSI sessions and can see two LUNS defined on the MD3000i, but cannot see data warehouses - it's like they went, and LUN are naked. Creating new data warehouse will wipe away their own, and while I have current backups, I would rather jump restore all this from scratch. Is there anything that can be done here?

  -Very well, could be a problem of will:

  http://KB.VMware.com/selfservice/viewContent.do?externalId=9453805&sliceId=1

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers