With Lightroom 5 Setup error

Similar Questions

• Validation with 5610 re-setup error

  Hello.  Take a deep breath and I'm leaving...

  I have a 5610 which worked perfectly with my computer and Windows XP until the computer crashed.  I had to replace almost all of the Interior and therefore had to go back to square one.  The man who fixed the computer reinstalled Windows XP but must have SP3 in the machine.  My old version must have been SP2.  I think so!

  Obviously, I had to reinstall a lot of software to get back up and working again.  No matter how hard I try now I can't get the software of HP Image Zone of re - install.  He tells me when I try there is a validation issue with hpz01.exe and c:\windows\hpoins07.dat Setup.  There is a six-digit number that follows it.   The system has tried several things including a self fix but it keeps telling me it does not work.

  The other interesting thing to note, it is that when I did my twice weekly scan with McAfee stalls hpz files in the drive and won't spend hours.  I have reflected on the disc and you can see no visible fault with it.  It has not been damaged in any way.

  I wonder if anyone would know what the message means and if it is a corrupted how disk download software from the HP support site.

  I'll be very grateful if someone can answer that I am waiting and waitng and waiting to get this bit to scan the computer fixed so that I can submit an article for publication.

  TF.

  P. S.

  The self-test and all document processing to hang in the print queue, and I can print a self-test using the keys on the printer page somehow.  Also I can copy any image that is located on the glass plate, but when I press the scan button it says that there is fault and go to documentation that gives me no will at all.  I don't know about the fax that it is rarely used and there is no way to test except to say that I don't get an error message when I choose this option.

  Phew.  That's all.  Thank you.

  Hi c0rnel

  Doing that, got the T shirt but not printer HP Image Zone!

  I even went as far as unplugging USB and disconnect the system from the wall outlet when the computer was turned off.

  Thanks for advise him.

  I spent all morning on the phone and then McAfee who say that it is not their problem but Windows XP - I think that it's either a Active X that will not allow McAfee or is that SP3 doesn't online.

  Sound like I know what I'm talking about, but not really.

  Thanks Tf.

  Message edited by Technofool on 08/01/2009 09:04

• CC Lightroom 5 Setup error

  I try to install Lightroom CC on my iMac 27 inches (Snow Leopard 10.6.8).  CC of Photoshop installed fine but Lightroom install fails with the following error

  -0 fatal Error (s), 2 error (s)

  -Payload: AdobeLightroom5CCMPkg-mul 5.2.0.0 {4b06fc24-6249-4c57-9830-6008a3ce9a80}.

  ERROR: DW006: Apple package cannot be installed successfully.

  ERROR: third charge useful Adobe Photoshop Lightroom 5 installer. pkg failed with exit code: 1

  Anyone able to suggest a fix?  Ive tried to restart, setting permissions, reloading of Installer etc.

  Hi error 7.

  Please see the Ko: http://helpx.adobe.com/lightroom/kb/exit-code-7-displays-installing.html .

  Kind regards

  Romit Sinha

• Outlook 2007 with Tungsten T3 - Setup error .jpg (no application on your handheld to open these files)

  Hi, guys can help me with this problem?  It makes clear that the question is that I need an application to open the file, but I don't know where I get the application. I use

  HotSync Manager 7.0.2 (come with Palm Desktop 6.2.2)

  The most recent conducted Outlook

  Vista Ultimate

  Tungsten T3

  Thank you!

  HotSync session completed with errors on 28/10/08 11:22:40

  • HotSync session started 10/28/08 11:22:26 and completed in 14.0 seconds
  • Impossible to install all the files of credit cards
    • Time: 0.7 seconds
    • Impossible to install 1 file (s)
      • Portrait.jpg
        • p
          • Protocol error: there is no such thing as the path leading to the file name. (2 TO 13)
            • vfsErrDirectoryNotFound
    • ERROR: The following files could not be installed on the SecureDigital (SD) card because there is no application on your handheld to open these files. If you have recently installed such an application, please run this application and then perform a HotSync operation.
      • Portrait.jpg
  • Calendar Outlook synchronized successfully
    • Duration: 0.0 seconds
    • Outlook calendar
    • -Do nothing
  • Outlook contacts synchronized with success
    • Duration: 4.8 seconds
    • Outlook contacts
    • -Desktop computer crush HH Sync
  • Synchronized successfully Outlook tasks
    • Time: 0.1 second
    • Outlook tasks
    • -Do nothing
  • Outlook sync successfully Notes
    • Time: 0.3 seconds
    • Outlook notes
    • -Desktop computer crush HH Sync
  • Backed up all files successfully to (has this out on purpose)
    • Duration: 6.5 seconds
    • Saved 27 file (s) successfully
      • NovarraURLHistory
      • NovarraSavedPages
      • NovarraPersistenceBuffer
      • NovarraPageCategories
      • NovarraMGProperties
      • NovarraHTTPCache
      • NovarraHistoryDB
      • NovarraFavorites
      • NovarraCookieCache
      • NovarraCache
      • NovarraBookmarks
      • NovarraBookmarkCategories
      • NovarraBitmapCache
      • Bluetooth Trusted Devices
      • Hide Bluetooth device
      • ConnectionMgr50DB
      • NetworkDB
      • PhoneRegistryDB
      • MultiMail Messages
      • PMNDB
      • Data from SMS Lib
      • SmsDB
      • psysLaunchDB
      • Graffiti shortcuts
      • Preferences saved
      • Queries
      • Speed1.0_dilP

  You are a genius...

  Thank you!

  Message relates to: Tungsten T3

• Lightroom 5 Setup error

  While trying to install LIghtroom 5 test and almost finished the following error message appears:

  1935 error an error has occurred during the Assembly of installation components 6435B7C0-E0C8-3AE2-91AE-7640034 EAFCE HRESULT 0x800736B3... What is the solution to this error?

  Hi Hazel111,

  Please visit the Doc KB: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html

• Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"

  I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed.  I couldn't find a reference to the error in line last night.  Can anyone help?

  Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.

  Only 6 more days until what the tax man will come :-)...

  Help!

  Put your search inside the quotes term allows when you search for the exact error messages:

  "Service Pack 3 installation cannot update an active (debug) system with a free (retail)"

  The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/

  CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".

  John

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• problem installing with lightroom.  error: change of modules, number of required folder?

  problem installing with lightroom.  error: change of modules, number of required folder?

  Hi daves.

  This problem normally occurs when the files of Adobe to launch Lightroom do not have read/write permissions.

  Please follow this article changing the error modules and grant permissions to required files

  Here's a double thread Lightroom: "an error occurred when attempting to change modules."

  Let us know if this helps

  ~ Assani

• I work with Lightroom CC can´t: error in module and internal error

  Hello. I have can´t work with Lightroom CC because it says error module and internal error. It can´t make or find the required folder. Help, please!

  H Hillary,

  I suggest you try the following steps:

  1. quit Lightroom

  2. open Finder: click on Go - Go to the folder and type ~/library

  3 open the Application Support - Adobe

  4 rename the folder Lightroom-Lightroom-old (by GetInfo - in respect of the name Extension of &)

  5. start Lightroom again after that.

  Let us know the results.

  Thank you.

• recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the proce

  recently purchased a samsung NX30 camera which came with lightroom 5, after several hours of searching on Google I got it setup properly with the right camera raw to be able to access my raw images. I found that my old laptop is very slow during the processing of hundreds of images that I usually take on a weekly basis.  I bought a new faster laptop, but when I looked for the cd with the software of series and I couldn't find in the mess of Christmas.  I downloaded a trial version of lightroom and got, it works on my new laptop. Is there a way to access the serial number of my version already installed and insert it in the version of track to make it work for me?

  Myron

  If you take the time to register to your original with Adobe installation (which most people do not), you can log in to your Adobe account and get the serial number. If you use a Windows computer and still have access to the old computer where Lightroom is installed, you can do the following:

  1. in the window folder options, make sure that you are able to see hidden folders.

  2. go to the C:\ProgramData\Adobe\Lightroom folder.

  3. use Notepad to open the file, Lightroom 5.0 Registration.lrreg

  You will be able to retrieve your serial number of this file.

• Try to install Lightroom 5 with CC but receive error code 5 on the initial start-up of Lightroom.

  Try to install Lightroom 5 with CC but receive error code 5 on the initial start-up of Lightroom. Uninstalled all adobe, including Creative Cloud CC products.

  Followed the instructions on the forum using the soft Cleaner CC for OSX. Have rebooted several times and even tried using disk utility to repair any permission probs. Still no luck.

  The problem started to arrive from the upgrade the previous version of Lightroom to version more up-to-date. Im hoping someone can help me with ideas. Thanks heaps.

  Ended up solving the problem, not finding answers. Delete the following file

  com.adobe.acc.AdobeCreativeCloud.plist

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix

• DAQmx Setup error

  I have a brand new with Windows7 - 64 bit.  I installed LV 2010 RT, FPGA and all drivers. No problem.  I then installed LV 2012 with RT, FPGA, a few tools and drivers.  I got an error when installing on DAQmx.  I told him to continue.  Then, I got an error at the end saying that something was not installed correctly.  The two messages are attached below.  I have uninstalled all NOR associated and repeated.  Same result.  I can open and run LabVIEW 2010 and 2012.  I can open MAX.  However, when I attach a USB-6008 to the computer, it is said that the driver is not loaded.  MAX can't see the 6008.  Which, of course, corresponds to the Setup error.  Any ideas how can I fix?

  Thank you

  DaveT

  Hi Dave,.

  This problem is often related to anti-virus software. You have any antivirus running on your new computer software? If you do, please try to uninstall DAQmx, disable the active virus scan utility and install the drivers as administrator.

  I hope this helps! Thank you

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• Microsoft Train Simulator error Setup error "Unable to verify the media" keeps coming back.

  Original title: Microsoft Train Simulator Setup error

  Try to install Microsoft Train Simulator on vista and when installing on the error 'Failed to check media' 2nd drive keeps coming back. Have also tried on another computer that has XP and the same results. Can anyone help?

  Hi Rick,

  Given that the CD does not work in Windows XP computer also, there seems to be a problem with the drive itself.

  Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver part of the disc with a soft and Lint cotton cloth.

  You can read the following article and check.

  Error message or the game stops responding on the "Loading" screen when you start a Microsoft game: "insert the right CD.

  If you are always faced with the question, so you may need to replace the drive.