With regard to 'shift indicator + historical column refresh after update.

Similar Questions

• What is the use of refresh after Update/Insert in Wizard EO?

  Hello!

  What is the use of refresh after Update/Insert in Wizard EO? When I need it and when not?

  Thank you.

  -These checkboxes are for columns whose values change after that db triggers run.

  BR, 906099

• If connected via Bluetooth with car. Phone starts to compose himself after updating iOS 10

  After updating iOS 10: connection via Bluetooth for car, then phone (iphone more 6s) began to compose himself. My President iPhone which is not longer work well

  Hi Pharao-nael,

  I understand that after update your iPhone to iOS 10, he begins to call itself when it is connected to Bluetooth. I know it's important for your iPhone to work as expected, so I'm happy to help for this.

  Since this occurs only when it is connected to Bluetooth, the first thing you want to do is cancel the twinning of the car:
  Configure and use third-party Bluetooth - Apple Support Accessories
  

  Turn off pairing a Bluetooth accessory

  To disable the pairing a Bluetooth accessory, tap Settings > Bluetooth, find the device you want to disable the twinning, tap , and then we forget this device.

  When you forget this device on your iPhone, iPad or iPod touch, this accessory is removed from the list of available Bluetooth devices.

  Make sure that your iPhone does not seek to call itself after it is disconnected, and then you can pair the iPhone and the car again:
  

  Pair your device with a Bluetooth accessory

  1. On your iOS device, tap on settings > Bluetooth. Stay on the screen until you complete the steps to pair your accessory.
  2. Place your accessory in discovery mode and wait until it appears on your iOS device. If you don't see it, or don't know how to make it discoverable, check the instructions that came with your accessory or contact the manufacturer.
  3. Tap your accessory pair. You will have to perhaps enter the CONFIDENTIAL code or password. If you do not know what your PIN code or word password, see the documentation for your accessory.

  When pairing is completed, you can use the Bluetooth accessory with your device. You can pair several Bluetooth accessories with your iOS device. Just follow the steps above to pair additional accessories.

  Thank you for using communities of Apple Support, cheers!

• 'between' column empty after updating

  Hello

  I have conversations 2.7 extension installed and enabled

  I after updating to TB 3.10, entre column went blank - there is no detail of the people involved in the conversation for each topic.

  Everything worked before the upgrade.

  If I disable the extension of field work conversations.

  Turning off and renabling the extension, as well as remove and re - install the extension does not solve the problem.

  Anyone has any ideas how to solve this problem?

  j

  I use the updated version of the 2.8 Conversations.

  When I walk it: display > display Conversation
  I noticed the same question about "Between" column.
  I also experienced other problems such as the buttons does not.
  Expand collapse has been blocked in compact mode and superimposed text.
  The "show this conversation in a new tab" did not work.
  opening in a tab is stuck "Loading" and the header area seemed wrong.

  This never happened before regardless of the version of TB.

  I had just updated to Thunderbird 31.0, but had closed and restarted since. Then, I selected the Conversation view to see the errors. But if necessary, to close and reopen to make it work.

  I closed Thunderbird, waited for the process to finalize and then open Thunderbird. Now it works well.

  Suggest that you get the latest version of Conversations first. Perform a restart.

• CF Pages failing to refresh after updates db

  I have an application written in CF 6.1 running on IIS 6 Windows Server 2003 which fails to refresh properly after updates to the db. If I right click and refresh, the page is painted normally. This seems to happen randomly and in different areas of the application. Even clicking the button disconnect sometimes provides a blank screen. Any ideas? Although many tests of the different systems and new, I excluded - faster hardware, ssl enabled, ms patches, SAV, cache, IIS, firewalls. Thank you

  Adobe has helped us solve this problem. Apply the fix - ColdFusion MX/JRun 4.0: Hot fix available for JRun4 Updater 6, IIS 6.0 redirect response truncation. http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=5c9389c8

  Thank you!

• with regard to the non-null columns

  Hi all
  I use 10g db.
  I have a query as below

  SELECT SH_CODE,SH_NAME,SH_NUMBER
  FROM SHIPPING_DETAILS
  WHERE SH_COMP = :GLOBAL.COMPANY
  AND TRUNC(SH_DATE) BETWEEN '01-JAN-2009' AND '02-JAN-2009'
  AND SH_NUMBER = NVL(l_num,SH_NUMBER)

  for the date of the range I have 5 files among them 4 records has value for the SH_NUMBER column and a block is null.
  but I don't get any record for which SH_NUMBER is set to null.
  why there is not this number?

  AND SH_NUMBER = NVL(l_num,SH_NUMBER)

  How this code above will be the judge?
  
  Please suggest me.
  
  Thank you...

  Try this:

  AND NVL(SH_NUMBER, -999) = NVL(l_num, NVL(SH_NUMBER, -999))
  

  or:

  AND (l_num IS NULL
  OR  (l_num IS NOT NULL
  AND SH_NUMBER = l_num))
  

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• Right shift key does not work after update BIOS on the Satellite A200 - 28 p

  For some reason, after I updated my Bios, my right shift key doesn't work and no not my FOUR and SIX button, so why I write in words: (,

  I tried to reinstall windows, t hasn't made a difference.
  I tried to roll back the drivers for the keyboard, as well as the move towards the US version of the keyboard, nothing has helped.

  Thank you

  Hello

  What cell phone do you have exactly? And did you use the correct version of the BIOS?
  Have you tried to set the BIOS to default settings?

• I have a column with two values, separated by a space, in each line. How to create 2 new columns with the first value in a column, and the second value in another column?

  I have a column with two values, separated by a space, in each line. How do I create 2 new columns with the first value in one column and the second value in another column?

  Add two new columns after than the original with space separated values column.

  

  Select cell B1 and type (or copy and paste it here) the formula:

  = IF (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  shortcut for this is:

  B1 = if (Len (a1) > 0, LEFT (A1, FIND ("", A1) −1), ' ')

  C1 = if (Len (a1) > 0, Member SUBSTITUTE (A1, B1 & "", ""), "")

  or

  the formula of the C1 could also be:

  = IF (Len (a1) > 0, RIGHT (A1, LEN (A1) −FIND ("", A1)), "")

  Select cells B1 and C1, copy

  Select cells B1 at the end of the C column, paste

• Table with fixed header and the left column

  I created a table in my application with the fixed left column (left most column is fixed and remaining columns are scrolling from left to right). is it possible to create a table with fixed position and fixed left column?

  Suppose there are 50 rows and 10 columns in my paintings, and only 3 columns and 15 rows are visiable on the screen

  (1) when the user scroll left to right left only most of the columns must be fixed. Remaining cap of the table and column scroll left to right and vice versa. also

  (2) when user scroll high high bottems single topic most must be fixed and remaining all lines (with to the left most column) should be scrollable.

  I am able to put in place a point at the top, but not both. Please suggest

  "If I repopulate the value in the cell when user scrolling, shell, I get scrolling effect correctly as it only shows half cell when the user highlight half of the cell."

  Approach using TablelayoutManager display single cells and scrolling would be cell at a time.  And Yes, you will need to override navigationMovement and n of methods appropriate TouchEvent your TableLayoutManager so that he knows when to fill the cells.

  Another alternative is to have four managers, we don't the the upper left corner (the dead angle), one to make the top row (column headings), one to make the left column (row headings), and the other to do the rest (data).  Place all these in a delicate header and line manager.  Only allow the user to scroll the data part.  Have the difficult Manager to listen the scroll events.  Then have the wily Manager add and remove the dummy column and header line managers as appropriate.  Note that these topic fields would not good passes, they would be either there or they would not be displayed. That would give you your 1/2 a scroll of the cell.  And you wouldn't have to substitute anything to detect movement, you would have left the listener do scrolling for you.

• Windows media player, when I try to download a cd, it burns completely to 99% and then stops with an error message indicating that it may miss a codec.

  When I try to download a cd, it burns all the way to 99% and then stops with an error message indicating that it may miss a codec. How could I be missing this and how I get it back or find exactly what it is that I'm missing? Help!

  Hi jeanamae,

  the error message shows which codec is missing?

  Is there a 'additional information' icon or the link?

  Try to reduce the speed of the burn and see if you get the same question.

  B Eddie

• With regard to the application of Nook on the Surface RT. Is there a way to change the way that newspapers appear?

  With regard to the application of Nook on the Surface RT.  Is there a way to change the way that newspapers appear?  Like corners, they give a better way to navigate and get the overview for the different sections.

  Probably not "such what."  Next time you launch the application, make sure that the menu bar to it and see if there is a feedback icon.  You may be able to comment on what features you want and they can do just that.

• I want to get only year sysdate with my name of the defined column. but not able to get it.

  I want to get only year sysdate with my name of the defined column. but not able to get it.

  SQL > select to_char (sysdate, 'yyyy') as 'mahesh tyagi' from dual;

  Mahé

  ----

  2015

  SQL > select to_char (sysdate, 'yy') as 'Manu' from dual;

  my

  --

  15

  So I couldn't do 'Manu' or "mahesh tyagi" as the column name.

  The column name is "mahesh tyagi" is simply displayed it shortened to sqlplus due to the known values in the column length.

  create table year_test select to_char (sysdate, 'yyyy') "mahesh tyagi" double;

  year_test / / DESC

  You can change the way sqlplus displays the header of column with something like

  column "mahesh tyagi" format a15

• update of NULL in the column with the values of the adjacent column

  Examples of data

  with test_data as
  (select 1 as one, null as two, 2 as three,5 as four, 6 as five, null as six from dual
  union all
  select 1 as one, null as two, 2 as three,5 as four, 6 as five, null as six from dual)
  select * from test_data;
  

  This is one of those cases, the case may be where any value of a column can be null

  or two similar columns can be null. If the column is null then I want to update the adjacent column

  average value of the column, if the first column is null so I want to take the next non-null column and update, if the last column is null

  so I want to take prev not zero column and to update.

  In this case would be my expected output

  Un	Two	Three	Four	Five	Six
  1	1.5	2	5	6	6
  1	2	3	5	6	6

  Prospects for the future the suggesion or advice.

  Or, using Analytics:

  SQL> with test_data (id, one, two, three, four, five, six) as (
    2    select 1, 1   , null, 2   , 5, 6, null  from dual union all
    3    select 2, 1   , null, 3   , 5, 6, null  from dual union all
    4    select 3, 1   , null, null, 5, 6, null  from dual union all
    5    select 4, null, null, null, 5, 6, null  from dual
    6  )
    7  select *
    8  from (
    9    select id
   10         , cell
   11         , case when next_nn is not null and prev_nn is not null
   12             then (next_nn + prev_nn)/2
   13             else nvl(next_nn, prev_nn)
   14           end val
   15    from (
   16      select id
   17           , cell
   18           , val
   19           , last_value(val) ignore nulls over(partition by id order by cell) as prev_nn
   20           , first_value(val) ignore nulls over(partition by id order by cell range between current row and unbounded following) as next_nn
   21      from test_data
   22      unpivot include nulls (val for cell in (one as 1, two as 2, three as 3, four as 4, five as 5, six as 6) )
   23    )
   24  )
   25  pivot ( min(val) for cell in (1 as "ONE", 2 as "TWO", 3 as "THREE", 4 as "FOUR", 5 as "FIVE", 6 as "SIX") )
   26  ;
  
          ID        ONE        TWO      THREE       FOUR       FIVE        SIX
  ---------- ---------- ---------- ---------- ---------- ---------- ----------
           1          1        1,5          2          5          6          6
           2          1          2          3          5          6          6
           3          1          3          3          5          6          6
           4          5          5          5          5          6          6
  

• I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the same scale of assessment pr

  I had Photoshop CS for a while. I use it for one purpose, which is to standardize my bronze products photos, all photos are identical with regard to the composition, lighting, backgrownd, actually, I always place the pillar of satisfaction even scale and then only switch products bronze... a simple task of worm. For this reason I have is no need to upgrade my old version of Photoshop. My problem is that it doesn't work anymore since Windows 10 recently installed in my PC. IO have tried to install it several times but can't. Is anyone out there help me please!

  Activation for CS is closed. Adobe provides you with a free replacement of CS2.

  Uninstall CS

  Go here: Download Adobe Acrobat 7 and Adobe Creative Suite 2 products

  Click English, download Photoshop CS2 and also copy the serial number that comes with it.

  Install CS2 and use this serial number CS2. There no need activation.

  Take your copy of the CS, it is no longer usable.