With the help of a touch of tab in an editable InContext causes problems.
I created a table with each cell in a row being modified successfully. I would like to be able to use the Tab key to move from cell to cell.
I found 2 problems with this:
- The Tab key does not move the cursor to the next cell.
- The Tab key creates a space in the cell that you cannot cancel in the InContext editing screen.
2 questions:
- Is there a way to make the tab key work?
- Otherwise, is there a way to disable the Tab key altogether?
Thank you very much!
Steve
Hi Steve,.
You are right and it is the behavior of the browser with the editable regions. However, you can cancel the margin that pressing the tab key created by pressing Ctrl / Cmd + Z or SHIFT + Tab on your keyboard or by clicking the Cancel, edit button in the InContext Editing toolbar.
Pressing the tab key will actually wrap the content in a div with a style from the left margin - as by clicking Remove in the toolbar button.
It can be possible to override this behavior or disable the key tab with a custom script.
Best regards
Corey
Tags: InContext Editing
Similar Questions
-
With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.
Hi, Raymond J,.
· Did you do changes on the computer before the show?
· You get the error message?
· What type of internet connection do you use?
· What security software do you use?
Follow these methods.
Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.
Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.
After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.
(a) click Start, run.
(b) type msconfigand click OK.
(c) the System Configuration Utility dialog box appears.
(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.
(e) when you are prompted, click restart to restart the computer.
Method 2: Follow the steps in the article.
How to troubleshoot possible causes of Internet connection problems in Windows XP
-
With the help of several types of video files into one film will prevent the publication?
I am using Movie Maker on Vista. I have mpeg, avi and wmv files. The Movie Maker plays very well in project mode, but will not be published. Multiple file extensions would be the source of trouble?
If so, is there a quick fix?
Hi d1bon,
1. what exactly happens when you try to publish a project?
2. do you get an error message?
With the help of several file extensions should not be a concern.Disable video filters and check the result.
1. click on tools and then click Options.
2. click on the Compatibility tab.
3. to turn off a filter, clear the check box next to the name of the video filter.You also uninstall the Codecs and check the result: Uninstall
Please provide us with more details on the issue, so that we can better help you.
Check publish a movie in Windows Movie Maker
Check, solving problems with publishing a movie to your computer
Kind regards
Syed
Answers from Microsoft supports the engineer. -
Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.
Hello
Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
is supposed to work.You will probably need to reload the drivers of the device and any camera control software.
Login as an administrator.
Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlThen let windows updates on however prevent loading of drivers who are often older than the
those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
With the help of large paintings for a random word generator
Hello
I am currently working on a random word generator quiz this kind of thing, you press a button (click/touch) and a random word appears, you must then click/touch again to choose that if you think it's a real word or a compound word, whenever you get a right you get a point. No problems so far, I have all this works with the help of a few global variables (eep) and a couple of berries that store the image names and the true/false values so that they are real or not.
Now that I'm starting to fill the building with the final content I am realizing that the table of the image is going to be huge, some 250 more entries and currently he is sitting on an action to click the button. Is it the right way to go about this or is there a better way to store the information about all? In a text or .js file maybe?
All boards that much appreciated, thanks for reading!
Hi spiders.
If you push 200 objects a picture, you probably want to use a loop "for".
Alternatively, if you load an image at random, and they are all named in the order, you can try something like this:
wordCount var = 200;
var imageIDToLoad = Math.floor (Math.random () * wordCount); / / Choose random num
Substring var = ' images/word'+imageIDToLoad+'.png';// added this var to work around quotes
var imageURL = "url (" + subString +")"; / / create the URL based on the random ID num and substring
var randomWord = sym.createChildSymbol (imageURL, "wordWrapper");
-
Hello
I currently have problems with the help of apex_item.select_list_from_query_xl in a select statement with a UNION in it. I have a region of type SQL report and my statement looks like:
SELECT apex_item.text (c004, 1, NULL, 10) val
Of apex_collections
WHERE collection_name = "TABS".
AND c002 = 'NUMBER '.
UNION
SELECT Apex_item.select_list_from_query_xl (1, c004, 'SELECT display_value' |)
'OF tab_select_list' |
"WHERE tab_column_sysid = ' |" C005) val
Of apex_collections
WHERE collection_name = "TABS".
AND c002 = 'SELECT LIST'
(Basically I'm trying to establish a relationship with a text element and a list of selection in there).
The problem is that some of my selection lists are more than 4000 characters long need to use the apex_item.select_list_from_query_xl. The error returned from the foregoing is ORA-01790: expression must have the same data type as the corresponding expression, which is fair enough as the apex_item.select_list_from_query_xl returns a clob and apex_item.text a varchar2. So I tried casting the apex_item.text on the type clob as follows:
SELECT to_clob (apex_item.text (c004, 1, NULL, 10)) val
Of apex_collections
WHERE collection_name = "TABS".
AND c002 = 'NUMBER '.
UNION
SELECT Apex_item.select_list_from_query_xl (1, c004, 'SELECT display_value' |)
'OF tab_select_list' |
"WHERE tab_column_sysid = ' |" C005) val
Of apex_collections
WHERE collection_name = "TABS".
AND c002 = 'SELECT LIST'
and now I get the error ORA-00932: inconsistent data types: expected - got CLOB, which is unexpected. Someone has ideas how to get around this?
Thanks in advance...Please we say your first name and add it to your forum profile to help us. Thank you.
Try UNION ALL instead of UNION.
Scott
-
My AirPort Extreme end not implemented with the help of AirPort Utility
Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.
When I try to set up as a Wireless extender...
Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?
.. .it will not accomplish the synchronization upward with AirPort Utility.
Which version of AirPort Utility? If it's on your Mac... and you don't know what version you have...
Open AirPort Utility
Click the AirPort Utility menu in the upper left corner of the screen
Click on about AirPort Utility
Report on the version number you see here
You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?
-
Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.
maryml wrote:
Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.
Press and hold on the text and wait for the copy/more pop up.
-
With the help of Club running on the Nike watch +.
Hello
This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?
As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?
Hello
You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:
- Contact Nike (support is available by phone and via social media):
- Nike + running Club to support:
More information:
https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8
-
With the help of old gear series noon on El Capitan
I have a Vox Tonelab SE effects audio Board (around 2004), there the old serial midi on the back ports. I hung with the help of a USB MIDI interface cable. While the USB Midi interface to the show in Audio / Midi set upward and also in the profile system for USB port it does not detect the Vox Tonelab so no communication lunch.
There is a POWERPC application called ToneLabSE SoundEditor which I downloaded and installed in the hope he would install a driver but I guess that this obviously doesn't work on INTEL in any case. Using Wine I can run the PC version, but still no communication via midi.
Someone at - it ideas, would like to get this Panel communicating effects via MIDI.
Thank you
Solved! Using the WINE app I've run the version of the PC of ToneLab SE editor application. So pretty unintuitively by changing the serial midi to USB, SERIAL interface cables that went to the and out on the Tonelab SE. Now of the Se ToneLab editor I can write banks of programs to hardware Tonelab, but unable to empty the banks since the material Tonelab to software. My main desire was to use Expression pedals on the Tonelab as Midi Ableton controllers and some of the switches to the control of the Looper stomp. Now I can do it all. Hooray!
-
With the help of Yosemite, I like Photos app in general; have big Aperture library, although I use rarely opening Tools. Advantages, disadvantages and pitfalls related to the migration of Photos?
Opening was a pro the Pro amateur-oriented or serious app, usually shooting Raw, probably on a digital SLR.
If that's you then pictures will miss a lot for you.
If this isn't the case, then opening was probably overkill for your needs.
If you like the pictures then this is the way to go.
-
With the help of Mac 10.9.4
If I open Thunderbird, I can connect to my e-mail address and download the messages. If I select "Get Mail" once again, Thunderbird crashes and fails to connect to my emails. If I then close Thunderbird and re-open it, I'm able to immediately connect to my mail.It seems to have sorted itself after a few days. (Fingers crossed). Until today it worked properly. Will keep an eye on things for the next week and the report does so again.
-
Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?
Would you like to share why you must do a clean install?
You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.
Computers that can be upgraded to use OS X Internet Recovery - Apple Support
PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.
-
How to change titles & dates of lots of pictures (like in iPhoto?) With the help of Mac 'Pages' on, 2008 aluminium MacBook running OSX El Capitan 10.11.4
With the help of Mac 'Pages '.
A typing mistake?
If it is and you mean Photos Date of Mac are modified by selecting the photos using the Image menu == > adjust the time and date of order and changes made to the metadata such as keywords, location, etc. are made by selecting the photos and find the info and registering metadata in the Info window
These are detailed in the help topics of pictures - a good place to look for help on the Photos
View and add information about the photos
You can view and add information about your photos. For example, you can see the date and time a photo was taken, the information about the camera that took the photo and badges that indicate the status of the photo. You can assign titles and captions to photos, add or change the location of the photos and change the date and time for them information. You can select multiple photos in an instant and add or change information about them all at once.
View and add information about the photos
To view or change information for the photos, you select one or more photos, and then open the information window.
- Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.
- Add or change information: Change the following.
- Title: Enter a name in the title field.
- Description: In the Description field, type a caption.
- Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
- Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
- Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
- Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.
Show titles, other metadata and badges
Change the date and time of photo
You can change the date and time associated with a picture. You can do this if you are traveling to a location in another time zone, and your camera affect your dates photos and periods that are correct for your House, but not the place you visited.
- Select the photos you want to edit.
- Choose Image > adjust Date and time.
- Enter the date and time you want in the modified field.
- Click a time zone on the map, if necessary.
- Click on adjust.
-
Question
get a dotted line around .swf files in my flash site now. This is new from Firefox 3. With the help of 4 on a MacBookPro. tried the fix "style no outline. does not work. any help?Ah, quite understand now that I added to my doc html
< style type = "text/css" >
{body
background-color: #FFF;
}
"'object {outline: none ;}"} '< / style >
Maybe you are looking for
-
Satellite C660/C660D - Webcam does not work
I recently got the Toshiba satellite c660/c660D laptop for my 21st birthday in July. It is said there is a built-in webcam, but I can't see it or find it. Also when I try to use videoconferencing on Skype, he said that it is not important which web c
-
the driver installation error file not found
I have a mp3 player that works very well on my wifes XP system but when I try and use it with Vista I get error installation driver... file not found. I tried all 3 usb ports... no luck. I uninstalled the device... nothing. Then I tried to plug in
-
Start the computer upgrade to Windows 10 without my permission
I am running Windows 7 and do NOT want to upgrade to Windows 10. I get these notices and must have clicked on something to upgrade. Now, the only options I get are to update now, or reschedule for another time. If the computer is off, it will sta
-
Start the computer with a black screen
Original title: my computer problems When I turn on my computer, it turns black and does nothing so I stopped it and when I restart it it happens I do the windows startup repair. When I do that my computer becomes black and does nothing more.
-
Search charm works do not or do not establish anything?
Search charm works do not or do not establish anything?