With the help of HP Mini, United States

Similar Questions

• With the help of Mac Mini like laptop?

  Hi guys,.

  Can I use a Mac Mini as a laptop? I mean go to work every day and carry it in my bag, and then connect to a screen. What I mean if a Mac Mini is of solid construction, built to withstand move it every day. The life of a portable device, haha.

  I just got a Mac Mini 2014, 1.4, 1 Tb Fusion Drive. Moreover, it's my first time with the merger in car. I don't know if they are not intended to transport around or as solid as any player.

  Any ideas?

  See you soon,.

  Carry a Mac Mini is really not unlike a laptop computer with regards to damage. Don't resist not to serious abuse, a rotating hard disk is probably the weakest regarding damage due to jostling normal.

• With the help of the stationary state how can w/XP, I enable Spanish keyboard for the user?

  My daughter has a Spanish class this is why we have installed a panel of Spanish key for that topic.  I loaded Microsoft steady state to control what she uses, changes, etc... make his story on the computer.  With the help of most all the restrictions that she does not see its Spanish keyboard.  How to activate the Spanish keyboard while steady state is to limit what she can get.  We want only that she go to his school work, loaded on the hard disk and not much more.  The Spanish keyboard is essential for this class.

  Microsoft SteadyState has been abandoned and is no longer supported.

• dml execution 2 statements at a time with the help of execute immediate

  I would like to run 2 DML statements at a time with the help of execute immediate usefulness,.
  
  ex:
  
  update employee set ename = 'Chantal' where eno = 123;
  Update dept set dname = 'IT' where dno = 345;
  
  I want the two statement to execute at a time, but I don't want to use any loop as well.
  
  Thanks in advance

  You can use:

  execute immediate 'begin update employee set ename='jagadeesh' where eno=123; update dept set dname='IT' where dno=345; end;';
  

  Although updates will always run one after the other.

  If you want the simultaneous treatment, then you need to use DBMS_JOB and DBMS_SCHEDULER to plan both work to run to run each of the statements independently.

• With the help of Club running on the Nike watch +.

  Hello

  This is something I have tried to work for a while and have not yet been able to find an answer. At the moment I use Nike + management club on my iPhone to follow the tracks that I find that gps is better than just using the application of the workout on my watch. However, something that really bothers me is that I start the race on my phone, but I can't then view my stats while running without having to press on and tap the watch and wait for the application to load, very irritating to race. I want to be able to lift my wrist and live stats are there to watch me, not listening and not get my phone out of my pocket. Surely this is something that can make the original watch?

  As a separate issue with the new app, Nike +, it does not recognize the songs I downloaded on my phone of Apple music in my playlists, then I have to play the separatelay of music through the application of music as opposed to go with Nike +? The ides on how to fix or is this a known problem with the latest Nike + app?

  Hello

  You may find it useful to consult the support resources of Nike and/or contact Nike for assistance with the help of their application:

  • Contact Nike (support is available by phone and via social media):
    • https://support-en-us.nikeplus.com/app/contact/l/4/t/4462/
  • Nike + running Club to support:
    • http://nikeplus.com/support/

  More information:

  https://iTunes.Apple.com/us/app/Nike+-run-Club/id387771637?Mt=8

• With the help of Siri on videos

  I think about buying Apple TV 4. I have a lot of photos and videos that I did, downloaded in iTunes and shared on my current Apple TV (2nd generation) using home sharing. Can I use Siri to browse these contents? Do I have to set some specific metadata for these files in iTunes/iPhoto for the research results of Siri to work?

  Siri currently has no visibility to personal multimedia files

  Research on your Apple TV (4th generation) - Apple Support

  Search for movies and television shows in several applications at the same time

  Use of Siri (in some countries) or the search application to search for movies and shows in apps * on your Apple TV (4th generation). You can search by title, genre, actor and more. With Siri, you can also narrow your search, you go.

  When you are looking for content with Siri or the application of the research, the Apple TV checks these content providers, with more to come soon:

  • United States: Film and television present in iTunes, Disney Channel, Disney Jr, Disney XD, FOXNOW, FXNOW, HBO GO, HBO NOW, Hulu, Nat Geo TV, Netflix, PBS, PBS Kids, SHOWTIME, SHOWTIME anytime, Starz, watch ABC
  • Australia, Canada, France, Germany and United Kingdom: film and television present in iTunes, Netflix
  • Other countries and regions: movies in iTunes

  * To search for content in one application at a time, simply open the application and use the search function of the app.

  Research topic

  • You can use the search application to find applications in the App Store.
  • If you have a subscription to Apple's music, you can use the app or Siri Apple's music search.
  • The search app and Siri do not search home Shared libraries.

• With the help of MS PRO Duo into the slot of the Satellite A200 MDMC

  I have a problem when inserting a Memory Stick PRO Duo SanDisk (512 MB) card with the help of Memory Stick Duo adapter in the card of my Satellite A200 - 1 M 8 (PSAE6) on Windows Vista Edition Home Premium.
  The device includes the insertion of the card (Windows notifies with the sound and the icon in the notification area).
  But then the computer window starts flashing and I can't open the disk of the card. OS always says insert the card in the card slot opening.

  I found the following statement in the manual of the laptop (Chapter 8 - optional devices):
  Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. :(

  But before that, I found this thread in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=101843𘷓
  The guy said that he has been successful and his position has been marked as the answer!

  Anyone know how to use MS PRO Duo in the locations of memory A-200?
  Thanks in advance.

  I put t believe that!
  First the user manual it says:
  -Memory Stick * PRO Duo *.
  -Memory Stick * Duo *.

  cards or adapters are not compatible with the multiple digital media card slot.
  In this case you cannot use the possibilities mentioned above!
  See the list given by Juan28 in the other thread.

  What you can do is to use the * Memory Stick * or * cards Memory Stick Pro *.
  I don't know but maybe the cards Memory Stick or Memory Stick Pro m is available for the Memory Stick Duo or Memory Stick Duo PRO working but to be honest I don t think so.

• With the help of time interleaved sampling (TIS) to get the highest sampling rate of data acquisition card

  I tried enabling to TIS using nodes of property for the appropriate channel and by disabling the TIS for strings, I don't want to use. When I do that, I get the following error:

  niScope read Cluster.vi:1internal software error has occurred in the extended software. Please contact the support of National Instruments.

  Name of the component: nihsdru
  File name: p:\Measurements\highSpeedDigitizers\hsd\driver\trunk\1.10\source\redirection\tHardware.cpp
  Line number: 1038

  State code:-223425

  Any ideas what to do?

  Thank you, but I managed to fix it with the help of a few colleagues.

• With the help of semaphore with a Global Variable - correct use?

  Hi all

  I looked in the use of global variables and in my case, it seemed with the help of a semaphore is the appropriate solution.

  In my case, I use a global variable to store the State of the system. Asynchronous two with screw environment (same VI) will follow two COM ports to see if they get a ' login:' command prompt. If the COM port is associated with Alpha, Charlie, or Echo, it increments by 1, and if it is associated with the Bravo, Delta, or Foxtrot, is incremented by 2 GV. If the GV is 3, the rest of the code will run. In this case, it must be a port COM A, C or E; the other should be B, D or F.

  A VI parent is called inside a loop. He works for the first loop. He never adds up to 3 on the second loop, however. I can't understand why. Please let me know if my code is a poor use of semaphores, or if there is debugging I can try.

  I'm still relatively new to LV, so I'm sorry if my screws are difficult to read. I created this in LV2011.

  Thanks for any help!

  CelerityEDS wrote:

  The output of my time looping (wait GV = 3) goes to the structure of the case on the bottom right (clear SGS, PasswordEntry, etc.), so the GV get indeed consulted by the upper case structure right.

  ??

  Your right upper case structure does not run until your time ends in a loop.  The while loop does not stop until the total is equal to 3.  Where can increment you the world besides structures case you cannot yet?

  Have you tried in your point culminating execution of the VI in order to see how they are actually running?

  Another problem that I see.  Assuming that your first while the loop is going to end.  In the structures of your case, you lock the semaphore.  But you can never unlock the semaphore unless you have the right combination of conditions that allow you to get to the case that unlocks the semaphore.  The conditions are based on data that are read before the start of the case of structure, which means that data will not be read and changed until it all ends.  You have the timeout of your lock semaphore connected on one of the cases, but your semaphore lock can never timeout because you do not have a value on his entry time-out.  I think you have a situation where you can lock a semaphore, then arrive at a situation where you can not unlock, then wind locking up of your cold code.

  I don't really think that you need a semaphore at all.  I think you can protect reading and writing functional your overall using a global variable, i.e. the motor action.  Overall, I think you need to rethink the architecture of your code.

• With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. .

  With the help of an operating system older Compaq is professional Windows. Internet Explorer connected very slowly. SO I've reworded in safe mode with network and IE has worked very well. I installed Mozilla Firefox and then restarted in normal mode. Then Internet explorer would not connect. How to diagnose in safe mode. What does safe mode or safe mode with network do to help diagnose? Can someone help me solve this problem? Any help would be appreciated thanks in advance.

  Hi, Raymond J,.

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What type of internet connection do you use?

  ·         What security software do you use?

  Follow these methods.

  Method 1: As the problem does not persist in SafeMode with network, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Follow the steps in the article.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  How to reset the Protocol Internet (TCP/IP)

• Upgrade to LR5.7 and PS Elements 13.  With the help of an SSD that is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?

  Upgrade to LR5.7 and PS Elements 13.  With the help of a Solid State Drive, which is more complete! Can I remove older versions of these programs without affecting the functionality of the new programs?

  Yes, there is no need to keep older versions of the software on the SSD (or your computer).

  In addition, you mentioned but if the photos are on the SSD, you must move them off the SSD for a typical hard drive, by following these instructions: Adobe Lightroom - find folders and files moved or missing

• with respect to an application to turn with the help of a global static variable

  Hello. I've read a few articles on JavaFX competition, and as a beginner, so I have to practice on this subject. Now, I'm trying to implement a turn-based application which can be played between 3 to 6 players. Furthermore, I use a scene from a .fxml file and I need to update it properly depends on certain calculations of each thread (in other word players). My main problem is, I don't want to use a while loop that checks the status of similar game;

  While (GameState! = State.GAME_OVER) {}

  currentPlayer = GameBoard.getNextPlayer ();

  perform certain actions, calculations, etc.

  }

  So, I want to use threads to work instead while loop. I guess only with the help of the Service used to iterate class and assign the next player will be adapted to instead of using the while loop and the tasks for the calculation of each player, or waiting for a few responses of human players on the UI account, however, I am faced with two problems.

  1. It has a global static variable (like the GameState which is an Enumarator) determines the State of the game, so it should be updated and must be verified by each round. Is it possible to do this?
  2. How can I get rid off this while loop?

  I would like for each answer. Thanks anyway.

  It shouldn't make too much difference. The basic idea is that you have a model class that represents your state of the game (the class of game in example jsmith). When a player makes a move, you update the game state. Because this will result in changes to the user interface, this update must be performed on the Thread of the FX Application.

  If the player makes the passage is a human player, the move would be done by a user action (mouse click or press button, etc.); This will be handled on the FX Application thread in any case.

  When the State of the game changes so it is in an "artificial" player's turn to move, have the object representing the artificial player calculate his next move and then update the game state. Since it is a response to the evolution of the game state (it is the artificial player's turn), it will also be on the Thread of the FX Application.

  The only (slight) complexity comes if the calculation of displacement for the artificial player takes a long time. You don't want to perform this calculation of long duration on the Thread of the FX Application. To handle this, the cleaner is to start a task that computes the desired pass and then updates the status of the game when travel is ready. So, something like this:

  GameState game = ... ;
  // UI is bound to the game state.
  ExecutorService executorService = ... ;
  // ...
  
  final Player currentPlayer = game.getCurrentPlayer() ;
  final Task calculateMoveTask = new Task() {
       @Override
       public Move call() {
            Move move = // compute next move...
            return move ;
       }
  };
  
  calculateMoveTask.setOnSucceeded(new EventHandler() {
       @Override
       public void handle(WorkerStateEvent event) {
            gameState.makeMove(currentPlayer, calculateMoveTask.getValue());
       }
  });
  
  executorService.submit(calculateMoveTask);
  

  If you make a thread more than that, you're probably do badly... Also, there should be no need anything it either, will be held in a "global" static variable (the idea above is the only structural change you the example posted by jsmith).

• With the help of the UNION with apex_item.select_list_from_query_xl

  Hello
  
  I currently have problems with the help of apex_item.select_list_from_query_xl in a select statement with a UNION in it. I have a region of type SQL report and my statement looks like:
  
  SELECT apex_item.text (c004, 1, NULL, 10) val
  Of apex_collections
  WHERE collection_name = "TABS".
  AND c002 = 'NUMBER '.
  UNION
  SELECT Apex_item.select_list_from_query_xl (1, c004, 'SELECT display_value' |)
  'OF tab_select_list' |
  "WHERE tab_column_sysid = ' |" C005) val
  Of apex_collections
  WHERE collection_name = "TABS".
  AND c002 = 'SELECT LIST'
  
  (Basically I'm trying to establish a relationship with a text element and a list of selection in there).
  
  The problem is that some of my selection lists are more than 4000 characters long need to use the apex_item.select_list_from_query_xl. The error returned from the foregoing is ORA-01790: expression must have the same data type as the corresponding expression, which is fair enough as the apex_item.select_list_from_query_xl returns a clob and apex_item.text a varchar2. So I tried casting the apex_item.text on the type clob as follows:
  
  SELECT to_clob (apex_item.text (c004, 1, NULL, 10)) val
  Of apex_collections
  WHERE collection_name = "TABS".
  AND c002 = 'NUMBER '.
  UNION
  SELECT Apex_item.select_list_from_query_xl (1, c004, 'SELECT display_value' |)
  'OF tab_select_list' |
  "WHERE tab_column_sysid = ' |" C005) val
  Of apex_collections
  WHERE collection_name = "TABS".
  AND c002 = 'SELECT LIST'
  
  and now I get the error ORA-00932: inconsistent data types: expected - got CLOB, which is unexpected. Someone has ideas how to get around this?
  
  Thanks in advance...

  Please we say your first name and add it to your forum profile to help us. Thank you.

  Try UNION ALL instead of UNION.

  Scott

• My AirPort Extreme end not implemented with the help of AirPort Utility

  Bought a used AirPort Extreme (Genesis 4) of a person who showed me that he worked at home. When I try to set up as a Wireless extender to my last existing AirPort Extreme, he will not carry out synchronization upward with AirPort Utility. It appears as a new extreme, but get a message 'unexpected error' before or after the name. Have you tried to reset the two while it is powered and turning the as explained in the help.

  When I try to set up as a Wireless extender...

  Gen 4 airport will connect to your existing AirPort Extreme wireless... or... it will connect using wired Ethernet wired, Permanent?

  .. .it will not accomplish the synchronization upward with AirPort Utility.

  Which version of AirPort Utility?  If it's on your Mac... and you don't know what version you have...

  Open AirPort Utility

  Click the AirPort Utility menu in the upper left corner of the screen

  Click on about AirPort Utility

  Report on the version number you see here

  You have an iPhone or a handy iPad that could be used to implement the 4th Gen airport if the problems continue with the help of your Mac?

• With the help of iPhone 6 s. try to copy the text message with a tap double and get a bubble with icons. How can I copy the message to paste in another?

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  maryml wrote:

  Try to copy a text to paste in another. When I double tap, as I always have, all I get is a bubble with icons on it. With the help of OS 10.0.2.

  Press and hold on the text and wait for the copy/more pop up.