WLSE and WCS

Similar Questions

• Differences between a WLC, WLSE and WCS

  Small question:

  I'm working on a proposal for a new WLAN infrastructure for a certain local government entities.  We use a Cisco WLC 5508.  I wonder what would be appropriate for additional management functions... Basically, I wonder if it would be wise to use a WLSE device... or is a WLSE basically a watered down Wireless LAN Controller?  I also read that the use of WCS is really large deployments... that I proposed would be 1142 32 laps with a WLC...  The client wants to know if there are tools or equipment and the benefits/disadvanteges both management software.  They want all these features... reports which told me in another post that WCS is what would be necessary for these functions.

  Thanks in advance!

  Cole

  WLC = wireless LAN controller.  It is a device of Layer2 AP will join and get their configuration and code.

  WCS = wireless control system.  It is a server on the LAN that uses SNMP for monitoring and the creation of models of the WLC.

  WLSE wireless LAN Solutions engine =.  This is used to monitor and model for autonomous AP.

  So, for what your customer is looking for, WLC 5508 need a WCS.  WCS is were all reporting will come from.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• 802.11 n WISN and WCS support

  That is the new wless 802.11n standard is current cargo support Cisco WLC 44XX and WISN (6500 wireless controller card)?

  Also, I need to know if is is supported in the WCS 4.1?

  Hi Pierre,.

  Yes, 802.11n is supported on the WISN and WCS with the following versions of the 4.2 train;

  Release notes for the controllers wireless LAN Cisco and Points of light access for version 4.2.61.0

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn4200.html#wp302677

  The following new features are available in the 4.2.62.0 WCS

  802.11n support - the introduction of the series access Cisco Aironet 1250 point, access of the class point business based on the IEEE 802.11n standard some 2.0 standard. The access point provides combined data rates of up to 600 Mbit/s to meet the bandwidth needs. Cisco WCS displays include a list for configuration, management and monitoring 802.11n access points and their associated wireless LAN controllers.

  The new trains WLC and WCS 5.0 are now released as well :)

  I hope this helps!

  Rob

• WLC, WCS and WCS Navigator

  I would like to know what is the difference between wireless Lan controller and controller wireless system.

  I need WLC if I want to deploy WCS.

  Can I use WCS without wireless LAN controllers?

  What is the diference between WCS and WCS Navigator?

  And just to add WCS navigator is used to group multiple instances of WCS. This would serve in a very large deployment (in thousands of controllers).

  -Mike

  http://CS-Mars.blogspot.com

• WLSEE and authentication PEAP + integration of ads by Win

  Can WLSE Express box users can be authenticated on the victory of the PEAP authentication (with digital certicficate) and integrated with Microsoft IIS and WIN AD server to authenticate users (without using the built-in AAA server)?

  Thank you

  WLSEE is not a 'controller' in the sense that it has a real-time control over what happens to your wireless users; It does just to push out to the APs models. If you say your APs AAA services are on your box of IAS (not IIS) instead of your WLSEE, that's where they look.

• 4402 WLC and WCS

  Hi all

  We have 3 WLC 4402 all with identical config and we use Lobby Admin to create guest accounts.

  Problem with this is that the guest account must be created on 3 WLC.

  I installation WCS and want to know how to extract the 3 existing wlc and their config in the WCS.

  Can the admin of lobbay can create accounts on the WCS and grow them into all wlc

  Hi RR,.

  >I install WCS and want to know how to extract the 3 existing wlc and their config in the WCS.

  It's pretty easy. You must add a new controller via the configuration-> page controllers. The option 'Add the new controller' is in the drop-down list at the top right of the screen. You can use a list separated by commas of IP addresses to add all three at the same time. WCS audit of the controller software and get to the bottom of the config.

  >Also can the admin Hall can create accounts on the WCS and grow them into all wlc

  I have not used the account Admin Hall (it is not really appropriate in the office where I work), but I know that you can create a guest account in the controller model launch pad. It is under Security in the sidebar. This model can then be applied to all three WLCs at the same time, that will simplify things. I guess you would need to make sure that your Hall administrator can access this particular part of the WCS.

  Hope that helps.

  -Jason

• GANYMEDE and WCS

  I'm looking for documents for the configuration of controllers of WCS to use authentication GANYMEDE +.  The current controllers use authentication GANYMEDE + but we have two new controllers that we want to install use GANYMEDE +.  Tried to add the GANYMEDE authentication + and permission, but it does not work.  Someone else put in place the current controllers.  Running 6.x WCS.

  Hello

  I understand that you mean WLC (Controller) and not the WCS (management software).

  Configuration Ganymede + on wlc: http://www.cisco.com/en/US/docs/wireless/controller/6.0/configuration/guide/c60sol.html#wp1697872

  I hope this helps.

  Nicolas

  ===

  Remember responses of the rate that you find useful

• ISE and WCS

  Dear,

  I have 2 questions below please respond

  • Installation of new servers of ISE, I m will configure comments sponsor portal the main task, in the existing configuration, there was a wireless controller comments webauth in what administrator-controlled wireless control system allows you to create a user id and password for the client (guest user duration is for 3 months) (6 months, 1 year) how I can import these 800 users in ISE, once the guest SSID is shifted to authenticate with ISE, all guest users will not have access to avoid this a major stop, how do I import all users of WCS in ISE?
  • Can we import the user id and the password to a CSV file and then e-mail to all customers about the change of common password, then when you first connect to the guest, he should get a password change request. and they can set their own password. is this possible?

  Thank you

  Hi Jack,

  Yes, you can use option for change of password for guest users.

  Under access invited > configure > portals comments

  Select the portal and find the settings of the Login page.

  > Allow customers to change the password after logging in.

  Concerning

  Gagan

  PS: rate if this can help!

• WISN 4.1.185.0 and WCS 802.1 x dynamic wep "to generate a new key.

  I tried to find the command that can check the wep keys are dynamic changed.

  All docs involved 802. 1 x not dyn wep but what command I can type on the WISN to see cli that the kay has changed?

  We get messages from AirMagnet (which might be bugs) indicating that the keys do not change.

  I watched show advanced eap and I also watched some debug commands.

  Can someone point me to the correct command to verify that a key is changing somehow?

  Thank you

  Bob Todd

  Please evaluate the useful messages.

• WLSE-> issue of upgrade license WCS

  Hello

  We must improve our WLSE to WCS, but our sellers bought the license wrong (WCS-Standard-K9) is possible to move the WLSE to WCS with this license and just get the CD conversion needed on your part?

  You must contact licensing at Cisco for the correct answer to this. The coordinates are on the WCS support page or you can call TAC.

• Features of WCS and order info

  Hello!

  as described in:

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd802570d0.html

  More Cisco WCS

  • Support of Cisco WCS deployment on a single server

  • Supports mobility services enablement, availability and the ability to track the location of a single device Wi - Fi or tag on request

  and

  Cisco WCS location

  • Support of Cisco WCS deployment on a single server

  • Includes location services to support the follow-up of a single Wi - Fi device on request or location extended functionality by adding a Cisco wireless location appliance.

  • Cisco WCS location must be installed to support the deployment of a Cisco wireless location appliance.

  This means, that permits tracking of clients by WCS interface without deployment of the location device?

  What are diffirences between MORE & LOC licenses? (There is no difference between WCS-STANDARD-K9 + WCS - APLOC - 50 (or AIR-WCS-WL - 1.0 - K9) and WCS-STANDARD-K9 + WCS - PLUS - 50, instead of HA on PLUSlic, isn't?)

  You can follow a single customer by drilling down to the client without the location device.

  Adding the location device allows you to track several client/tags/thieves on the cards that you configured.

  Basis was without location.

  More (change of name of place) is the basic + location.

  These are old reference numbers and should not be used:

  AIR-WCS-WL - 1.0 - K9 (location of Windows)

• 5.2 WCS and ACS 4.2

  Is it possible to get the admin of WCS users authenticated on GBA? I was not able to make it work and I found a page of FAQ http://www.cisco.com/en/US/products/ps6305/products_qanda_item09186a00807a60f0.shtml#apr6

  say it is not supported. Is this correct? As I was not able to get the WCS to authenticate to the ACS. I don't get passed or failed attempts. The ACS is currently authenticate other users / devices and the GBA and WCS can both communicate with each other.

  You can integrate the WCS and ACS for local users of WCS.

  Add WCS to an ACS server:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1064286

  Configuration of the server credentials ACS View:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2mon.html#wpmkr1171779

  Configuration of RADIUS servers:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1054014

  GANYMEDE server configuration:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1053935

  Import tasks in ACS:

  http://www.Cisco.com/en/us/docs/wireless/WCS/5.2/configuration/guide/5_2admin.html#wpmkr1064285

• improve the WCS and WCC integration / sync activity

  Hi all

  We have WCS integrated with WCC as backend storage of content. We use the STANDARD connector for integration between these 2 products suites. On check in content to the WCC, she undergoes life-cycle activities normal document and then contentid is placed in the queue of the integration table. Queue information will be collected and WCS will be synchronized with the information in document OWCC.

  This whole process takes longer (approximately more than 1 min) and users are not able to find the documents that they created immediately.

  Let know what steps can help solve or improve this performance. We did the analysis and concluded that unless the State of the document is PUBLISHED in the OWCC, information will not be placed in the queue table and synchronization of content is getting delayed.

  Indications will be very useful.

  The OOTB 'connection' is a polling station synchronization process (heart draws OWCC). It is not realistic to expect, it is a process in real time.   It can be as fast as the slowest part of the process - if you want Sites to poll more frequently change the "timing" in the system events. The desire to increase the frequency of audit of heart - but this will solve is not the question of the time it takes to the WCC from "creation of loan".

  If you want it to be more 'real-time', you need to create your own 'connection '.

  The folks over at Function1 and BezzoTech (https://www.youtube.com/watch?v=qVTS--OS78o) has created an interesting link where 'Document' is actually created in the OWCS UI and then automatically pushed in WCC and Sites 'at the same time;

• Signal strength and/or coverage measurement tool

  Does anyone know a software or a device that I could use for this purpose?

  Is a pretty broad question, and the answers range from: free, but you must know what you do to the solutions goes from US$ 5000.00 - 10, 000.00 (and you should know what you're doing).

  In the simplest form, you may be able to get away with something like NetStumbler (free, www.netstumbler.com). NetStumbler give levels, the use of channel and an indication of the interference of signals.

  Another popular (free) system is Kismet, that runs on Linux. It will also give you an indication of the intensity of the signal, the use of channel and noise/interference. Kismet can also be extended and use as a form of Wireless Intrusion detection.

  It's great that you are looking to do a study on place, but ultimately you will need to refresh operation, technology and parametric requirements to be able to correctly interpret the information that provide the tools.

  There are no tools for an exit that will give you Explicit instructions on how to build your network wireless based on the collected data.

  There are some management systems, like the WLSE and tools provided with the Cisco LWAP, which will show you the cover you RF, rogues, performance, etc. .in real / near real time. The use of these you can set a permanent system, or there are even tools 'auto adjustment' in systems to balance out of your APs for the best coverage with the material available.

  It would be useful that you could provide some details, so we can guide you in a direction.

  FWIW

  Scott

• WCS 4.2 - customer account

  Hi all

  The deployment currently LWAPP project consists of 240 APs. I have 4 unit of 4400 wlc and managed through wcs 4.2.

  The problem is, I can't get the number of customer goes to the Toilet. Even when there is connected clients the Dungeon page and graph showing the number 0.

  I can see the good count via WLC customer individual web Mgmt. It is quite disappointing.

  Any who have addressed this problem before?

  Very grateful for the help!

  I've seen this when the code of the controller version was to 4.1.x and WCS was running version 4.2.

  Once we upgraded wireless controllers, the number of customer was right.

  Hope this helps,

  -John

  (Don't forget to rate helpful messages)