WMP 11 will not burn

Similar Questions

• my screen is blue and the playlist will not burn to a cd

  try to burn a playlist to a cd.  Playlist will not burn.

  You use a PC or a Mac - I can then ask for your message to be moved to the iTunes for Windows or iTunes for Mac forum

• We will not burn SN-S082H CD player using iTunes - error 2131

  Hello

  I just bought a laptop PC Nextday with the SN-S082H command that will not burn CD using Itunes - error 2131 (I think from memory).

  Could someone let me know the solution to this?

  Thank you, Rob.

  I think that this error due to consistent problems.
  I read in some articles of the computer that the iTunes software is not fully compatible with different CD/DVD drives firmware.

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• Optical drive will not burn

  I saw that there are many other positions on this, and although I found others who had descriptions which were similar to mine, the patch did not work.

  My specs:

  Windows 7 64-bit SP1

  H8 HP desktop PC - 1360t

  My optical drive: DH16ACSHR

  My driver for the optical drive is the cdrom.sys, the version of the file: 6.1.7601.17514, date 21/06/2006 driver

  When I bought my computer, I did a clean install of Windows 7 64-bit. A ran all updates at once and drive perfectly serious. A few weeks later, it will not burn. I use Windows to burn simply .pdf files, and it gets to the point where it says 'burn', but after I click on burn the dialog box disappears. The drive makes noise and rotates the disk and writes data to it, but the dialog box never pops up or check the disk. It shows no more burn % completeness. If I try to remove the disc, the drive does not open. If I open with a paper clip, because the disk rotates, it sure is beating sounds and jams. When I open the drive and the drive, the drive clearly has written data to, but it cannot be read by other readers. It just says: the disc is no longer a Virgin, but I cannot see what is on it.

  I HAVE ALREADY TRIED:

  Remove/uninstall the driver

  Checking the registry entry for the upper and lower entrances, THERE ARE NONE

  Being run/scannow - Windows comes up saying that it could not find any problems, all right.

  Update driver - he says I have the latest driver

  Roll back the driver - he says that there is no driver installed previously

  I had a HP Office before a different model and exactly the same thing happened then. When I first came to this other, it burns very well, so I thought that maybe it was a problem with the previous machine... but then after a few weeks it started doing the same thing.

  I'm confused because when I look at the release date for the driver, it's super old, and he says it's the latest version... but Microsoft lists 50 updates to it at least between then and now, some of them as recently as June. I can't seem to find a way to download this driver common windows by itself and install it this way or the other.

  I refuse to do a complete reinstall because I do not think that it will solve the problem more than temporarily. Within the company, it is the fourth total office with what has happened, and whenever we do a clean install, it works at first but then goes back to the same problem again.

  Hoping someone has an idea where I can get a newer than 2006 for this device driver.

  Hello

  Hope the following patch helps:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Good luck.

• WMP 11 will not play my dvd downloads digital message error c00d2906 not support level of mandatory protection to decompress the digital file

  Original title: wmp 11 will not play my dvd digital downloads

  iGet an error message c00d2906 is not supported level of protection required to decompress digital file is there a fix for this problem

  Hi alfredDAVILA,

  ·         What is the format of the file?

  Follow the steps in the article.

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

  http://support.Microsoft.com/kb/926373

  For reference:

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions (Applicable to windows XP)

  Windows Media Player 11 cannot read content protected by DRM on Windows Vista

  http://support.Microsoft.com/kb/935336 (Applicable to windows XP)

  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5268&ID=C00D11B1&ContextId=66&OriginalID=C00D2906

• Windows 7 starter edition will not burn DVD and will not format

  • My recorder DVD format player, will play and burn DVDs when I move my dvd drive to another computer running windows vista
  • It will not burn a dvd or format a dvd rw disc when it is attached to my netbook toshiba running windows starter 7

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  Engraving for Windows 7 Info

  If your computer has a CD or DVD burner, you can copy files to a recordable disc. This process is called burning a disc. Windows Burns discs in the active file system format or in ISO image format, depending on which disc format you choose.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• My Windows Media Player will not burn a CD, it is 99%, then will not be finished.

  My Windows Media Player will not burn a CD, it is 99%, then will not be finished. Used to work fine, no problems then just started does not. I tried Microsoft FixIT & or troubleshooting solved my problem. What can I do to fix this?

  Hello

  1. what error message you get when it ceases to burn a CD?

  2 What problem confined to a particular CD?

  3 did you change on your computer before the show?

  4. have you tried Open-the-playing-and-burning-cds-dvds-and-bluray-discs-troubleshooter?

  Method 1: Try a different CD and check if it helps:

   

  Method 2: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

   

   

  Method 3: Try to perform the clean boot and check if it helps, here is the link:

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• TSST TS-L632 will not burn a DVD

  TSST TS-L632 will load a DVD and DVD to show, but even after trying the new firmware it will not burn. Also I tried new DVDs and I tried Opti Drive Control and it does not create a test disc. ConvertXtoDVD goes through the process to the end, but does not burn the DVD. No error message appears.

  Hi DeputydD,

  If Dell diagnostics failed, then you need to replace the DVD drive. They are fairly easy to find for your model laptop and pretty inexpensive ($25-40).

• Win7 dvd & cd maker will not burn for all formats

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  Windows 7 Ultimate (used to have xp, & it worked) will not burn cds & DVD for playback in standalone players. Will only play on the pc.

  The version of the audio driver is now 6.1.7601.17514

  The modem is Conexnt

  VGA driver nVidiaMotherboard is: NVIDIA

  ===========================================
  Windows 7 what app do you use to burn video DVDs
  and video CD?

  Have you tried to use DVD creation in Windows 7 to burn your DVD?

  Read the following article.

  Windows 7 - burn a video DVD with Windows DVD Maker disc
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker
  (Windows 7 Home Premium / Professional / Ultimate / Enterprise)

• LOOKING FOR DVD DRIVE FIRMWARE W. 7. PRO DRIVE WILL NOT BURN

  MY OPTICAL DRIVE WILL NOT BURN OR FORMAT, IT WILL READ.  IT ALSO DESTROYED RECORDS. The M/S FIXIT TOOL DOES NOT HELP. TRY TO FIND THE FIRMWARE for a (STANDARD) OPTIARC ad - 7540a PLAYER PERSPECTIVE.  I LOWERED THE WRITE SPEED, OFF THE DRIVE AND REACTIVATED, WITHOUT SUCCESS.

  AN A6020 FUJITSU NOTEBOOK, ORIG. WITH VISTA AND UPGRADED TO WINDOWS 7 PRO.

  will follow your advice and get a USB key.       Ernie g

  Definitely recommended, and they are bootable too. :)

• Windows Media Player will not burn my files!

  Media Player from my window will not burn my files on my blank CD rom. I add what I want in the colum burn and then I click on button (start burning) and try to start burning but 10 seconds later, it ejects my blank CD songs and pop of the screen upward to say that... (Windows media player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.)   Please help me and understand what to do!    Thank you

  Hey Tashina_Jean,

  Here are a few things to try:

  1. make sure that the disc is clean.

  2. Select a recording speed (write) more slow for the CD burner (recorder).

  3. try a different brand of blank discs.

  4. stop all other programs that are running.

  5 disable any programs that could activate themselves, while burning is in progress, such as screensavers or anti-virus programs.

  6. defragment your hard drive.

  Links: what please refer:

  To reduce the burn speed:

  Change settings for burning a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

  For disk defragmentation.

  Improve performance by defragmenting your hard drive

  http://Windows.Microsoft.com/en-us/Windows7/improve-performance-by-defragmenting-your-hard-disk

  Also, see if the Update CD/DVD rom driver.

  For driver updates, see:

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD writer will not burn disks in XP Pro...

  I'm having a problem with a recently re-installed Windows XP Pro (in fact, Media Center Edition 2005, updated with SP3). I can not burn DVD at all; I've tried three different readers of verified and made a 'repair installation' to the BONE, but no dice.

  In 'My computer', the drive (SATA, Samsung SH-S223C drive) presents itself as "DVD - RAM Drive (E :) ', but when I insert a blank DVD-R media, the name changes to 'CD Drive (e)' and pushes me, as usual, to open an accessible folder writable.). If I open the drive in the Solution Explorer, controls do not show that it can be "written". The same thing happens with two other known readers, who are all two PATA interfaces.

  In the "Properties" for the reader, "Enable CD writing for this drive" is checked. In Computer Services, "IMAPI CD burning... '. ' is running.

  I tried various checked drives and different brands of media (known to be good on the other PC), so the problem must be in the OS somewhere. I can't run the "Fixit" tool, because it invites me to .NET Framework 2.0 or later version, and I've got .NET Framework 4 already installed (what is yet another problem?).

  Any help would be appreciated.

  Windows XP does not work (not never, will likely not ever) natively write on DVDs.  CD, Yes, he has limited there.  DVD - need a third party application.  You are using.
  
  --
  Martin Stanley
  MS - MVP
  --
  How to ask Questions the Smart way
  http://www.CatB.org/~ESR/FAQs/smart-questions.html

• WMP to will not Sync & gives Error Message (8 GB internal/32 GB external)

  I have a 8 GB Sansa Fuze w/mic SDCH 32 GB card inserted (bought after reading, it could be used).

  The amount of the card and the size is displayed correctly in WMP, Explorer and elsewhere.

  The player shows that I have 1 G available on the internal memory and 13 GB on the 32 GB card.

  When I tried to sync the new music I get the following message...

  "WMP cannot access the file.  The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  It is not a WMP question - I tried to synchronize with another Rocket Player and WMP works very well.  I have also tried to sync the music on this rocket on another computer at home and get the same message.

  Any ideas why these programs show 14 GB of available, but the "rocket" will not allow synchronization or copying.

  I also, that the drive to Autodetect and have used this rocket for several years now.

  There are 5200 songs on this player.  I'm starting to wonder if this Sansa Fuze cannot really work with a 32 GB card.  At the same time, I format the card with Windows 7.

  Any ideas?

  Thank you...

  If you do not have the latest firmware, do the update. Might as well. You don't have to bother with the installation of the update, because there will be more updates. Just use the manual method.

  Sometimes, for some mysterious reason, formatting of the "rocket" help the external card work better. Don't ask me why - could be stray bits of information floating around several synchronizations.

  But as long as you have copies of the content, it is worth a try. Out the 32GB card before formatting.