WMS idle error

Similar Questions

• WMS idle won't let not computer off

  I am running XP pro SP3. When I try to stop I get the WMS idle message is still running and I have to click end now for computer to finally stop. That is what it is?

  OK - Yes, you can either update of Nero (the Scout module), uninstall or disable the functionality of Scout.  See if that helps...

• try to stop computer get a messagw 'end of programme... ". WMS idle "have to wait loads can I knew windows down»

  When I try to shut down the computer a box lights up in the middle of the screen that reads end program... WMS idle, I have to wait for it to load and then I can click on end of computer time stops

  http://www.troublefixers.com/end-program-WMS-idle-message-on-Windows-shutdown/

  Try the above link and see if it helps.

  Look under bing ending the program wms.idle and you will find also many cases that could adapt to your situation.

• I get a message WMS IDLE at stop down

  Blocking PC, I get a WMS IDLE message, why I do this and what is it referring to I am running Windows XP Home Version, I have been using this version for 4 years. I recently updated my card mother and memory

  Office communicator 2005 is installed? Or Nero? If you have Nero installed, disable Nero scout

• After that computer has been idle, error installation about DriverCure

  Get the message box on my screen after that computer remained inactive during the night of DriverCure saying Setup error. I was not able to locate to uninstall / reinstall. I don't remember always to help or even try to load this product. How can I get rid of this?

  If you go to start and type msconfig. Then go to the tab startup look to see if you see a program called DriverCure here. If so, then uncheck the box and restart your computer to see if you get the Setup error.

  Before going any further, do a manual system restore point.
  Right-click on the computer icon in the desktop, then choose Properties
  In the left pane, click System Protection
  Alternatively, to directly access the System Protection tab, click Start and type SystemPropertiesProtection.exe.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  In the System Protection dialog box, type a description, and then click on create.

  If you find DriverCure, then look at the location and copy the path. It would be something like: HKeyLocalMachine\Software\Microsoft\CurrentVersion\Run
  Then go to start, type regedit. Then highlight the path you have copied, if drivercure present in the key, and then delete it.

  Then reboot and see if you still see the same error install DriverCure.

  Please answer back with an update.

  Sincerely,.

  Marilyn

• While Tecra A2 shut downs message appears - TMEEJM_Wnd cannot be closed

  Have a Tecra A2 purchased in March 2005. I reinstalled the system successfully. When I try to shut down the system of windows open one after another with the message: "TMEEJM_Wnd cannot be closed." I have the ability to immediately close or cancel.

  What I do, the message disappears. Then the other window opens with the message: "cannot close WMS Idle". The same orders came. The system shuts down after clicking on 'Close' or 'Cancel '. With the "Systemrecovery" I put the system back. The problem is still there.

  Does anyone have any idea?

  Hello

  I discovered that this service of TMEEJM_Wnd belongs to the Toshiba Mobile Extensions utility.
  A similar problem appears sometimes on my laptop. It s not a portable Extensions Utility but Adobe acrobat reader cannot be closed and the laptop can not stop down.

  I reinstalled adobe und cleaned the registry with CCleaner and since that time, pop does not appear
  I think that if you don't need t Extensions Mobile utility you must either remove the BONE or you can try to reinstall again.

  With regard to the other message: WMS Idle
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/921113/en-us/

• Various recurring error messages blue box when the laptop is idle

  I have a new (10 months) HP Pavilion dv7 - 3165dx running windows 7 home premium 64-bit.  After that laptop sitting idle for a while, the screen goes black with a blue box error message.

  01/02/11-02/14/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Disable or uninstall any antivirus, commercial defragmentation or disk backup.  Check the configuration of the disk hard yoru and check the updated drivers.  Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Call Technical Support HP - a talked to Josh: I was sent to HP.com support site to download software downloads and the pilot.  Said it is known the problem and had me run the CHKDSK command to automatically solve problems.

  02/16/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Make sure you have enough disk space.  If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates.  Try changing video cards.

  Check with your hardware vendor for updates to the BIOS.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000007E (OXFFFFFF800032D3905, OXFFFFF88002B97288, OXFFFFFFFFC0000005, OXFFFFF88002B96AFO)

  Data collection for the crashdump...

  Call the HP Technical Support - talking to Matt: check space drive, and said that it was very good.  Updated graphics driver.  Disabled the hard drive protection.  Power options reset of Hibernate to standby mode.  Update BIOS of F.10 F.15.  Ran test drive: Smart check, DST short and long DST all spent.

  02/17/11

  Error message: A problem has been detected and windows has shut down to prevent damage to your computer.

  System_Service_Exception

  If this is the first time you've seen this stop error screen, restart your computer.  If this screen appears again follow these steps:

  Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware or software.  Disable the BIOS memory options such as implementing caching or shading.  If you need to use safe mode or remove or disable components, restart your computer, press F to select the advance boot option, and then select Safe mode.

  Technical information:

  Stop: OX0000003B (...)

  Data collection for the crashdump...

  I don't ' know what to do at this point.  HP phone support seems unable to solve my problem.  Can someone help me?

  Hi DP - K,.

  Thank you for all the helpful tips.  This weekend when I saw my McAFee scan/security reports, even if the McAfee Security Center shows that viruses and spyware works, he did not run a weekly full scan on my laptop since the end of January.  I don't know if he tried to scan and then breaks down, or it will not start.  When I tried to run a manual scan, windows shut down and I got a blue screen error message after about 5 hours of scanning - 63% digital.  When I ran the HP System Diagnostics report, it showed that my Security Center has not recorded an antivirus product.  "The Security Center cannot identify a current antivirus application.  There is no product protection antivirus installed or it is not recognized. "When I ran the HP reliability and history of problem report, it showed that my error messages started on 01/02/11, which is what I remembered.  I was able to restore my laptop to 23/01/11 when I had no problems and then, I uninstalled McAfee security and re-installed software.  I manually ran a full scan and it took 5 hours to complete, it has completed and reported no problems.  I look today and so far, no problem.  If the problem happens again, I will try the suggestion of Avast below.   Thanks again for all your great suggestions.

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• After that the computer is idle for a few minutes, you receive an error message. "Vtdispl display driver does not work properly, please restart the computer to solve the problem."

  I rebooted and turned power off the computer several times and always get the same message. The size of the text on the screen and the icons are larger than the way in which they should appear. How can I solve this problem?

  Consult the manufacturer of your so great PC OEM, for example Dell / HP or laptop and install the latest drivers.
  If a visit generic PC your graphics card maker or manufacturer of the motherboard and install drivers lates
  Do NOT get the drivers of MSUpdate

• I am getting error 0x800CCC90 answer ERR idle time-out. I get multiple copies of emails in my Inbox, and when deleting, they reappear when I connect then.

  My server is mail.btinternet.com

  Whenever I connect to receive e-mails my Inbox receives multiple copies of my new posts and also emails as soon as I read and often deleted.

  If you use Windows Mail in Vista, then try to compact and repair the database (see www.oehelp.com/WMUtil/) and also be aware of the risk of interference antivirus (see www.oehelp.com/OETips.aspx#3).  If this does not help, see if you can login via webmail and see if you have the same problems here.  It could be that there is a message that hangs the server and you can delete this message to get rid of it via webmail.  You can also contact btinternet.

  If you do not use Windows Mail in Vista, then you must specify what software you use to access your e-mail.

  Steve

• Message error "arrested -"filter"has failed."

  After upgrading to Mac OS Sierra, when you attempt to send a test print my Epson Stylus Photo 2200, I get the message error "stop -"filter"failure" in my print queue.

  

  I have left clicked on the printer-> error log menu item, and I have the following in the error log.

  E [27/Sep / 2016:10:04:40-0500] [Job 3] Job is stopped due to errors in filter; For more details, see the error_log file.

  D [27/Sep / 2016:10:04:40-0500] [Job [3] the following messages have been saved since 10:04:38 to 10:04:40

  D [27/Sep / 2016:10:04:40-0500] banner of start-up [Job 3] adding page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] queued on the "EPSON_Stylus_Photo_2200" by "derekberube".

  D [27/Sep / 2016:10:04:40-0500] file [Job 3] seized automatic...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] request file type is application / vnd.cups - banner.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] file of type application / vnd.cups - banner in queue 'derekberube '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end banner add page 'none '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] time to processing = 1474988678

  D [27/Sep / 2016:10:04:40-0500] [Job 3] 3 filters for task:

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgbannertopdf (application / vnd.cups - banner to application/pdf, cost 33)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster (application/pdf in the application / vnd.cups - raster, cost 100)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (application / vnd.cups - raster to printer/EPSON_Stylus_Photo_2200, 0 cost)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] job-sheets = none, none

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [0] = "EPSON_Stylus_Photo_2200".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [1] = '3 '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [2] = "derekberube".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [3] = "testprint.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [4] = "1".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [5] = "AP_ColorMatchingMode = AP_VendorColorMatching AP_D_InputSlot = nocollate com.apple.print.DocumentTicket.PMSpoolFormat=application/pdf com.apple.print.JobInfo.PMJobName = testprint com.apple.print.PrinterInfo.PMColorDeviceID... n. = 23775 com.apple.print.PrintSettings.PMCopies... n = 1 com.apple.print.PrintSettings.PMCopyCollate... b. com.apple.print.PrintSettings.PMFirstPage... n = 1 com.apple.print.PrintSettings.PMLastPage... n = 2147483647 com.apple.print.PrintSettings.PMPageRange... a.0... n = 1 com.apple.print.PrintSettings.PMPageRange... a.1... n. = 2147483647 fit-to-page media = letter requested by pserrorhandler = standard job-uuid=urn:uuid:8781dff0-21e9-31ef-5b09-534d193452be job-originating-name of host = localhost to-date-time-create = date-time-to-processing = time-to-creation" time processing 1474988678 = 1474988678 = document-name-supplied testprint PageSize = letter»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] argv [6] = "/ private/var/spool/cups/d00003-001.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [0] = "< CFProcessPath >".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [1] = "CUPS_CACHEDIR = / private/var/spool/cups/cache '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [2] = "CUPS_DATADIR = / usr/share/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [3] = "CUPS_DOCROOT = / usr/share/doc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [4] = "CUPS_FONTPATH = / usr/share/cups/fonts.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [5] = "CUPS_REQUESTROOT = / private/var/spool/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [6] = "CUPS_SERVERBIN = / usr/libexec/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [7] = "CUPS_SERVERROOT = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [8] = "CUPS_STATEDIR = / private/etc/cups.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [9] = "HOST = / private/var/spool/cups/tmp".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [10] = "" PATH = / usr/libexec/cups/filter: / usr/bin: / usr/sbin: / bin: / usr/bin ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [11] = "[email protected]".

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[12]="SOFTWARE=CUPS/2.2.0 ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [13] = ' TMPDIR = / private/var/spool/cups/tmp ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [14] = "USER = root"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [15] = "CUPS_MAX_MESSAGE = 2047"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [16] = ' CUPS_SERVER = / private/var/run/cupsd.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [17] = "CUPS_ENCRYPTION = IfRequested"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [18] = 'IPP_PORT = 631'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [19] = "CHARSET = utf-8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [20] = "LANG = fr_FR. UTF - 8"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [21] = "APPLE_LANGUAGE = en - en"

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] envp[22]="PPD=/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd ".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [23] = "RIP_MAX_CACHE = 128 m"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [24] = "' CONTENT_TYPE = application / vnd.cups - banner" "

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [25] = "DEVICE_URI = 0 usb://EPSON/Stylus%20Photo%202200?serial=L5602021107061925"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [26] = "PRINTER_INFO = EPSON Stylus Photo 2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [27] = "PRINTER_LOCATION = MacBook Pro Derek Berube\"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [28] = "PRINTER is EPSON_Stylus_Photo_2200"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [29] = "PRINTER_STATE_REASONS = none"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [30] = "CUPS_FILETYPE = document"

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [31] = "" FINAL_CONTENT_TYPE = vnd.cups - raster/application ""

  D [27/Sep / 2016:10:04:40-0500] [Job 3] envp [32] = "AUTH_I."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgbannertopdf (PID 2075)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdft opdf2 (PID 2076)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter/usr/libexec/cups/filter/cgpdftoraster (PID 2077)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started filter /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII (PID 2078)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Started backend/usr/libexec/cups/backend/usb (PID 2079)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] Message catalog filename is \"/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Framework s/PrintCore.framework/Versions/A/Resources/English.lproj/cups_apple.strings\.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_banner(filename=\"/private/var/spool/cups/d00003-001\")

  D [27/Sep / 2016:10:04:40-0500] [Job 3] usb: AppleLanguages =-"en - US\".

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + connection-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] looking for \'EPSON Stylus Photo 2200\'

  D [27/Sep / 2016:10:04:40-0500] [Job 3] open connection

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2078 (/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacO S/rastertoescpII) was arrested with the 206 State (output Interface queue is full)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Tip: try to set the LogLevel "debug" to learn more.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] Page = 612 x 792; 9.40 at 603-783

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin ' permissions OK (040755/uid = 0/gid = 80).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] directory ' / System/Library/Printers/Libraries/USBGenericPrintingClass.plugin ' permissions OK (040755/uid = 0/gid = 0).

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/System/Library/Printers/Libraries/USBGenericPrintingClass.plu gin) (kr:0 x 00000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] load_classdriver(/Library/Printers/EPSON/CIOSupport/EPSONUSBPrintClass.plugin) (kr:0 x 00000000)

  "D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: copy to temp \"/private/var/spool/cups/tmp/0081d57f93b5a\ print file '.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE:-connecting-to-device

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sending data to the printer.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] sent 0 bytes...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] STATE: + cups-wait-for-work-over

  D [27/Sep / 2016:10:04:40-0500] [Job 3] align for banner 1.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2075 (/ usr/libexec/cups/filter/cgbannertopdf) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2076 (/Library/Printers/EPSON/InkjetPrinter2/Filter/pdftopdf2.app/Contents/MacOS/pdf topdf2) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: \"/private/var/spool/cups/tmp/0081d57f93b5a\"has 1 pages.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: open \"/private/etc/cups/ppd/EPSON_Stylus_Photo_2200.ppd\ file PPD «...»

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: PreferredRotation = - 90

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsPageSize = [612 792], cupsImagingBBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width = 612, length = 792, high = 9, low = 40, left = 9, right = 9

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970, cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: colorspace = 1, bitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: the seller matching mode is turned on and the requested transfer color space is sRGB.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: skipBytesPerRow = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bandwidth = 2970, bytesPerRow = 11888, band height = 3715, height = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: width of the frame = 2970, height = 3715 bitsPerComponent is 8, bitsPerPixel = 32 bytesPerRow = 11888, bitmapInfo = 5, resolution = (360.000000, 360.000000)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] HWResolution = [360 360]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] ImagingBoundingBox = [9 40 603 783]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] margins = [9-40]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PageSize = [612 792]

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsWidth = 2970

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsHeight = 3715

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerColor = 8

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBitsPerPixel = 24

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cupsBytesPerLine = 8910

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: rasterWriteHeader: unable to write the header streams raster: Broken pipe

  D [27/Sep / 2016:10:04:40-0500] [Job 3] cgpdftoraster: bytes written for the side 1 = 0, err = 5

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2077 (/ usr/libexec/cups/filter/cgpdftoraster) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] waiting for read thread exits...

  D [27/Sep / 2016:10:04:40-0500] [Job 3] PID 2079 (/ usr/libexec/cups/backend/usb) came out without error.

  D [27/Sep / 2016:10:04:40-0500] [Job 3] end of messages

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer - state = 3 (idle)

  D [27/Sep / 2016:10:04:40-0500] [Job 3] printer-State-message = "Sending data to printer."

  D [27/Sep / 2016:10:04:40-0500] [Job 3] - printer-motivation = none

  Line 66 # in the above seems to indicate the rastertoescpII utility failed with a status code of 256 and the error message "output Interface queue is full.

  Troubleshooting steps

  To try to solve this problem, I followed the steps described in the article «problems of printer on your Mac»  I have reset the printing system and it does not work.  I have also unplugged the printer, deleted the contents of the folder/library/printers/and then plugged the printer into.

  You will need to check with Epson to see if there is a new driver for your device compatible with macOS Sierra. The old drivers are not compatible. Even with the new driver, some people state that the error is not fixed :-( YMMV.

• Disk error backup external hard Time machine

  Hello
  While that hurry to catch a flight, I accidentally disconnected my external hard drive (which I use for time machine backups) before ejecting.  Now the House, the time machine backup does not recognize my external hard drive.  I went into disk utility to try to repair the disk.  Here's what he said:

  
  

  Verification and repair card partition for "Time Machine external HDD ' Verification of prerequisitesChecking map of partition partition listAdjusting to adapt to any disk as a requiredChecking for a partitionChecking of the system EFI sizeChecking of the system partition EFI systemChecking of file system EFI the EFI folder of the system partition contentChecking partition data HFS charger spacesChecking boot partitionsReviewing support loadersChecking Core Volume physical storage partitionsUpdating Windows boot.ini boot files of score as card requiredThe partition seems to be OK

  Verify and repair volume 'Time Machine' Repair file system. File system check exit code is updated 8. support partition for the volume as requires it. Error: disk utility can't repair the disk. Back to the top as many files as possible, reformat the drive and restore your backed up files.

  
  

  I could really use some help as to how I should proceed.  Any advice?
  

  I think you need to clear this backup disk, and while you are this and do a full backup (which takes all afternoon to all night) you will be working without a net. If you do in idle time, and after checking your boot disk, the risk of catastrophic failure while the backup is low. Start now and in the future, you will have a backup.

  If you have a different backup disk, add it and Time Machine will create a new independent backup on it, and then Time Machine alternate disks automatically.

• Apple Hardware Test has detected an error:

  I've had my MacBook Pro (16 GB memory and 500 GB flash drive) for over 3 years now and I have never had any problems with it. In fact, I bought his preforming always as good as it did when first it.

  But recently, I was watching something on YouTube and saw how to preform the Apple Hardware Test (turn on everything now "d"). I did that and got the following error code:

  4HDD/11/40000000: SATA (0,0)

  After Google search of this code, I read that I have a problem with my memory and should at the Apple Store to make it fixed. (of course, I'm out of warranty). Since it doesn't seem to be anything wrong with the performance of computers, what are you thoughts on this situation? All tips are very much appreciated.

  loz114 wrote:

  I've had my MacBook Pro (16 GB memory and 500 GB flash drive) for over 3 years now and I have never had any problems with it. In fact, I bought his preforming always as good as it did when first it.

  But recently, I was watching something on YouTube and saw how to preform the Apple Hardware Test (turn on everything now "d"). I did that and got the following error code:

  4HDD/11/40000000: SATA (0,0)

  After Google search of this code, I read that I have a problem with my memory and should at the Apple Store to make it fixed. (of course, I'm out of warranty). Since it doesn't seem to be anything wrong with the performance of computers, what are you thoughts on this situation? All tips are very much appreciated.

  MacBook Pro with the retina, OS X (10.8.4) Mountain Lion

  It is a hard drive error. Perhaps the drive, the cable, or cable SATA himself.

  In your case rMBP, SSD, disc connection socket or spindle drive

  Why did you run the test if you had any problems? I see now from above - idle curiosity.

  In or out of warranty you can get for free a 'Apple Service Diagnostics' OTC test

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  Always good to have a current backup plan. How to create a clone of startup

• HP DeskJet Ink Advantage 4535: HP DeskJet Ink Advantage 4535 error Code

  Hello

  I tried to connect my printer to the new wifi and on the printer, the message of this code was displayed.

  You have no idea where is the problem? I rebooted the wifi router, but the result was the same.

  I thank very you much.

  Jan

  

  Hi @Maxan,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community! I understand that you need to connect your printer to the network wifi and you get an error message. I'll be happy to help you.

  A remarkable work has been done trying to connect your printer to the wifi network before posting your question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills, and we really appreciate your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  For greater clarity, I would need more information to isolate the problem to be hardware or software related.

  Other devices connect without hassle to the same network?

  After restarting the printer without any communication with other devices, you get this error message, or it goes back to the home screen?

  Is it possible for you to try this printer on a different network?

  We will first do a hard reset: as follows:

  • Turn on the printer.
  • Wait until the printer is idle and silent before continuing.
  • Unplug the USB cable to the back of the printer. If your printer has a network or a wireless connection, leave it connected.
  • Remove the cartridges from the printer.
  • With the printer, unplug the power cord at the back of the printer and the wall outlet or power strip.
  • Wait at least 60 seconds.
  • Plug the power cord into the wall outlet.
  • NOTE:
  • HP recommends connecting the power cord printer directly to a wall outlet.
  • Reconnect the power cord to the back of the printer.
  • Turn on the printer, if it does not automatically turn on.
  • The printer may go through a warm-up period. The printer lights can blink, and transportation could move.
  • Wait until the warm-up period ends and that your printer is idle and silent before continuing.
  • Reinsert the ink cartridges, and then close the ink cartridge access door.
  • Then try to connect to the network and check if it works.

  Please refer to these links for troubleshooting more: link 1: http://support.hp.com/ph-en/product/HP-DeskJet-Ink-Advantage-4530-All-in-One-Printer-series/5447926/model/5447927/document/c00489814/

  Link2: This error could be a jam of transport also. Please visit this link: http://support.hp.com/us-en/product/HP-DeskJet-Ink-Advantage-4530-All-in-One-Printer-series/5447926/model/5447927/document/c04718263/

  Link 3: setting up the wireless printer: http://support.hp.com/us-en/product/HP-DeskJet-Ink-Advantage-4530-All-in-One-Printer-series/5447926/model/5447927/document/c04719556/

  I really hope that the problem is solved without hassle and the printer works great. I hope this helps. Please let me know how it works. Just to say thank youPlease click the ' Thumbs Up ' button to appreciate my efforts in giving me a congratulations. If it helps, Please mark this "accepted Solution".

  Thank you and have a great week ahead.

• iMac (retina 5K, 27 inches, end of 2015) randomly restarts without errors

  My iMac has been randomly restart itself (about once per day) when it is idle.  Everyone knows the same problem?  I found a YouTube video and that's exactly what happened to my iMac: https://www.youtube.com/watch?v=ka7lUIeiH5E

  I attended once - the computer was in (not sleeping) with the screen off, nothing CPU/GPU intensive market.  I suddenly heard a chime and saw that the computer restarted itself.  I logged.  There is no window pop up.  I launched the Console and did not see anything unusual before the reboot.

  More information:

  1. The computer is idle when restart occurs.  Nothing on the computer indicates overheating.  Display is off (for inactivity) and fan is quiet.
  2. There is no trace of the software stop, panic the kernel or crash.  System log shows the normal activities, and then a sudden entry BOOT_TIME, as if someone pulls the power cord.
  3. It is not a failure, because the computer must be turned off if this is really a power failure.  "Start automatically after a power failure" is not checked.
  4. It started happening after I came back from a trip and upgraded my iMac to the latest Mac OS X five days ago.  This computer was purchased in October and I had never seen anything like this until a few days ago.

  Comments on the YouTube video suggests a total prosthesis, but I hesitate to do so if it turns out to be a software/firmware problem that can be fixed. -The computer is heavy and the closest Apple Store is not very close, not to mention the efforts of backup/restore.

  Thank you

  Seems to be a problem with 10.11.4. No doubt you did not have this problem before installing 10.11.4

  Further discussion on this issue here: 5 k iMac restarts on its own after you install 10.11.4 unexpected restart

  I think it is highly unlikely that it is material, as all signs point to a software problem (no problems before the update to 10.11.4 and everyone does the same behavior (unexpected random reboots) and the error code ('previous stop cause - 128' - which nobody seems to know what that means exactly) after updating to 10.11.4.) In any event, hardware problems usually come right out go the box or after tinker you with the machine somehow like the installation of ram, add devices, etc. and later, you start to experience unexpected behavior. None of this seems to happen with this issue.