WordPad print not as seen on computer

Similar Questions

• Install the device driver of printer not connected to the computer

  My printer is too old to connect to my new computer.  I want to "print to a file" and move the file to another computer on which the printer connected (this second computer is not connected to the internet). How can I install device driver on the new computer with no attached printer?

  Hello

  1. What is the brand and model of the printer?

  If you want to move the file to another computer, you can copy the file to the flash drive and move to the other computer, so that you can print the file.

  Check out the links.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/sag_setup_indirect_printer.mspx?mfr=true

  http://support.Microsoft.com/kb/308028

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/293118

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/move-files-and-settings-to-new-computer

• Printer not detected by the computer

  I have a HP Photosmart c4599 printer and an HP Pavilion a350n computer running Windows XP service pack 3.  I installed a new hard drive to boot, and inadvertently had my printer connected to the computer before installing the driver.  Now, I know that shouldn't be done.  My computer does not find the printer at all, I could find the cause of the problem but not the solution.  How can I get my computer to find the printer?

  Finally solved the problem - I bought an Epson.  No more HP for me.

• HP 6510 printer wireless not recognized by the computer

  Original title: HP 6510 wireless printer not recognized by the computer.  Works well before today.  Printer says ity online

  Our HP computer does not find the printer wireless above.  We made the updated IP address, which is correct, have restarted the router, the computer and the printer.  Convenience store is unable to detect a problem

  Hi Karen,.

  -What version of Windows is installed on the computer?

  -What antivirus/firewall software you have installed on the computer?

  The document from HP concerning "printer does not maintain the wireless connection.

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02817031#N80

  You have tried most the steps mentioned in the document, but please try once more.

  Additionally, make sure that you disable the antivirus and firewall programs just to make sure that these programs do not block the detected printer.

  Note: You must enable the /firewall antivirus as soon as you've done troubleshooting. If this is not the case, your computer will be vulnerable to viruses.

  Let us know if the steps of troubleshooting mentioned in the link will help.

• Example: officejet j4580: why my printer say my appears not connected to my computer

  Why my printer say my appears not connected to my computer

  Hello @momodeda!

  Thanks for posting on the HP Forums!

  I don't know why the computer does not show the printer offline, but I would be happy to provide help to try and get communicating them again!

  The first thing I would suggest is to power cycle all the devices.  Remove the power to the printer, shut down the computer and remove the power to the router.  Wait 20 seconds, then reconnect the router.  Wait for the lights on the router to return.

  Plug the printer in and turn on the computer.  Once all devices are back on, try printing again.

  If this does not work then I would recommend uninstalling the HP software.  Once the uninstall is complete, it would be wise to perform a cleanup of the computer disk. A disk cleanup will improve the performance of the computer and remove the temporary files that may cause problems during the installation of the software. Once disk cleanup you must restart the computer and reinstall the HP software.
  
  To uninstall the HP software, click here: uninstall the HP software
  
  To perform a disk cleanup, click here: perform a disk cleanup
  
  To download the HP software, click here: HP Officejet full feature and driver software

  If please, after back and let me know how it goes!

• Printer is not recognized by the computer

  I have a Dell V715W printer that is properly connected to the computer. When I start the computer, the printer is online. However, when I tried to print a document to an email, I received this message: "Communication not available. Printer cannot communicate with the computer. "I ran the program in case of problem, and there is no result. Also, I unplugged the power cord and the USB cable and rebooted with the same error message. What should do?

  I have a Dell V715W printer that is properly connected to the computer. When I start the computer, the printer is online. However, when I tried to print a document to an email, I received this message: "Communication not available. Printer cannot communicate with the computer. "I ran the program in case of problem, and there is no result. Also, I unplugged the power cord and the USB cable and rebooted with the same error message. What should do?

  A few questions to clarify the situation...

  • What operating system do you use?
    -Windows _ Edition
    -32 - bit or 64 - bit?
    -Level of the Service pack of the system in question?
  • You download and install the drivers from the manufacturer (Dell) for this device (Dell V715w All In One Wireless Inkjet Printer) already?
    - Dell V715w all-in-one wireless inkjet printer drivers )<-- link,="" click="" on="">
  • Is it a new issue?  By that I mean this work once day and does not not the other?

• Printer Dell A920 scan but not print on HP pavilion 1154 computer

  original title: printer Dell A920 & new HP computer pavilion 1154

  Printer Dell A920 scan but not print on HP pavilion 1154 computer

  16Kabong,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• Why my printer will not scan to my computer, the will says not connected

  My hp officejet 6310 all-in - one will not scan to my computer can someone please advise

  my printer is connected through USB, when I ran the check he told me to uninstall and re install which I did, but still does not work

• Cannot complete the home network implementation to include this computer as it can not be seen on the network.

  Original title: How can I remove a unidentified firewall running also apparently in Windows Firewall?

  Under Windows XP with the Windows Firewall and any other firewall unidentified. Cannot complete the home network implementation to include this computer as it can not be seen on the network. Able to ping outgoing to other computers in a network, but not able to ping inbound from other machines.

  Hello

  1. what makes you think that there are unidentified, firewalls running on the computer?
  2. what exactly happens when you try the home network configuration? You receive an error message?
  3. what exactly happens when you try to ping any computer on the network? Error message?
  4. what operating system is running on this computer? Also after return from the edition of these operating systems?

  See the following articles that might help you.
  How to troubleshoot a network home in Windows XP
  http://support.Microsoft.com/kb/308007

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

• My mfc 3360C will not scan to my computer. my ink is almost empty, which would prevent the printer to scan?

  My mfc 3360C will not scan to my computer.  my ink is almost empty, which would prevent the printer to scan?

  Hi Jmaccoux,

  ·         What happens when you try to scan? You get no matter what error code or error message?

  Empty ink does not prevent the printer from the analysis of the files or documents.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to uninstall the currently installed drivers and install compatible drivers with the operating system from the link of the manufacturer provided below. Check if installation of the printer from the link below drivers pass solve you the problem.

  MFC - 3360C

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc3360c_all

  You can also see the following articles for more information on the analysis of the issues:

   

  The problems of scanning

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

   

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/scanning-frequently-asked-questions

  Method 2: If the steps above do not help, unplug the printer from the computer, uninstall the drivers for printer and re - install the same thing again.

  To uninstall the drivers,

  a. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

  b. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Check out the link for more details below:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  To install a program, see the link below:

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  Let us know if that helps.

• Printer is not communicating with the computer

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have problems with my Dell v305 printer I tried everything. Error message indicates that the printer is not communicating with the computer

  Hi vanessa James Sluys Veer,.

  Probably you should install/update your printer drivers for your operating system.

  Please see the link below for the Dell Web site:

  http://support.euro.Dell.com/support/topics/topic.aspx/EMEA/shared/support/DSN/en/document?c=UK&l=en&s=Gen&DN=1093016

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  Original title: "home network".

  0 x 80070035 "[name of the PC] is not configured to establish a connection on Port"File and Printer sharing (SMB)"on this computer".

  That's what I get on my ThinkPad when I try to do the networking. I placed all the parameters correctly: all 3 of my computers are set the same. 2 workstations work perfectly. They can even see the laptop but not to open all files. The laptop can, open same network t itself file. But he can see the whole of the network (including a printer, is told by the way). I, ve gone through all parameters twice. I've even set the C drives to share via the menus of context on each computer. I have visited many forums with none even come close to this problem (they all will tell you how to set the network parameters or they get very technical and over my head).

  I tried with & without a firewall.

  No password.

  I use a wired network.

  Laptop & 1 desktop computer running vista - 1 desktop computer running xp.

  They have all the latest service packs ms & udates.

  Any help will be appreciated.

  These files can be opened by norton or lenovo network setting apps. The settings do not work only in the application of network of vista. Nor can I work norton or lenovo from other computers.

  PS how can I ensure these settings effect may just lan and do not extend to the internet?

  Thank you bb

  I tried new drivers & returned through sharing & permissions, according to Jack, but he was not good. At the level of experience of my computer I can miss something obvious, but I doubt it because I've been very careful in following the instructions. I am experencing other problems with this laptop as well and I'll just get all. I am planing to get back anyway, that's why I needed network. I wanted to Exchange files over the network to avoid having to ' wait & swap "usb drives. Thanks anyway. Thank you BB bb

• printer wireless HP not connected to the computer

  My son tried hang our laptop wireless, with no result, since then the printer says not connected to the computer.

  Hi sharryn1940,

  In addition to Michael post, you can also find some good information at the following link:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My Photosmart HP 7510 is not recognized by the computer for printing.

  It was working fine, until what we replaced our router with a v3 TG797n I have reset the printer and reinstalled the software on the compters several times but it still won't print. During the new printer 'Add' processes on the computer will not find the printer, even using the intellectual property. The printers IP is coming as 10.0.0.34, all printing test through the printer directly arrived as work, connected to the corect network.

  When I look at the routers settings it says that he recognizes the device with IP 10.0.0.34, but I have computers (an XP desktop running at the time) and a HP Pavillion Dv6 with Win7 cannot always find and say it should be disabled.

  I downloaded and tried all the HP diagnostic tools, and they all tell me that my printer is not activated on/not connected and offer no alternative.

  I've had the printer for less than 6 months and already he had replaced with a new one because it was defective, and now it gives me a headache.

  In addition, we have updated the Office of Win8 and cannot install printer on that. I checked the lists on this site as to what printers are/are not taken in charge and I didn't know that the HP Photosmart 7510 nowhere mentioned at all.

  And as usual, after trying everything (it has been two weeks now to try different things) and then post online for support, trying one more time and it works like magic again.

  I downloaded the HP printer, troubleshooting thing once again (the third time) run the wizard and found the printer (the second time), downloaded the drivers rather than using the disc (for the second time, the first time that the installation has failed just a t at the end) and intsead to add the IP address of the printer in step "COnnect network printer", I looked at the user name for the device on my router (HPDDxxxx), and which came to the place.

  ********************************************
  EDIT: 02/11/13

  Tried to print something today - once more the computer cannot connect to the printer. Printer is always connected. No parameters had changed since I got it to work.

  Why is this happening! I need to print things! Very close to giving up. However, I doubt that I will get a refund of HarveyNorman, because when they test it out it will connect, and that's enough for them not to say 'no refund '. Ugh.