Workstation Z400: EEC VS. Memory non EEC

Similar Questions

• HP z400 workstation: workstation z400 giving 5 beeps Red

  When I sw on my workstation z400 working it gets automatically after conecting to the smps power, it starts with the blue light in the two seconds, power button flashing power button red and gives 5 beep one after the other then pause of 2 seconds and again gives 5 beeps... Please tell me what is likely causes... Please answer soon... Thanks in advance...

  Thanks for the reply brooo... but I already change 4 sticks of memory... but not solved... wt abt autostart... .it starts automatically when pressed without power button, as now I connect p/s to the smps.

• Workstation Z400 HO: cpu

  My workstation Z400 has a XEON W3520 CPU do I have to stay in the series of 'W' XEONs tell a W3690 or can I use others?

  Hello

  It is a list of supported components, including CPU on the following document:

  http://www.HP.com/Canada/products/landing/workstations/files/13276_na.PDF

  Kind regards.

• Workstation Z400: upgrade my processor

  Hello world...
  I have a pc workstation Z400 and I want to upgrade my processor intel xeon w3520 to intel xeon w3570. Is this possible?.
  I have 16 GB of ram and I use a ti new 750 of graphics card it works perfectly. The reason that makes me want to change the processor is also my pc will slow down when start and make my pc to relax.
  
  Sorry for my bad English
  
  I hope to see you soon.

  Yasir1, welcome to the forum.

  Your English is very good.

  Here's the QuickSpecs for the computer.  In Page 3, you will find processors compatible with the motherboard.  It seems that the processor you want to buy is not on the list.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Z400 workstation: Z400 build date

  Hello!!

  Try to find the date of manufacture of a workstation Z400 - serial number [personal information]

  Be this June of 2012?

  I don't know the Protocol HP...

  Thank you!

  Hello:

  Yes, that's right, June of 2012.

  To find the date of construction of any HP PC by serial number, you:

  Look at the 4th 5th and 6th of the characters as read from left to right.

  They must always be numbers.

  Thus, in the specific serial number you posted...

  The first "2" corresponds to 2012 (of course, it could be 2002 or 1992, but you know that the Z400 was not even heard at the time, so 2012 is the only possibility).

  The second 2 and 5 corresponds to the calendar week in 2012 when the PC was built.

  Your PC was built in the 25th week of calendar 2012 (end of June).

  YWWZZZZ ZZZ

• Memory non - ECC for HP Z820

  Hello. Is it possible to use non - ECC RAM in the HP Z820. If so, which do you recommend?

  Hello

  Please check with the following reliable supplier:

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/HP+Z+series+workstations/HP+Z820+workstation-upgrades.html

  You can buy from them, or use the information to buy elsewhere (ECC, no non - ECC).

  Kind regards.

• Z400 workstation: Workstation Z400 has quick start?

  I read online about some BIOS offer everything including a quick start instead of test during the boot upward. The Z400 offers such a thing as which would speed up boot time a lot.

  Hello

  Some computers have a feature POST bypass, but I wouldn't recommend using it.  You can find it in the BIOS if it is available for your PC.

  After a death off voltage then launch Manager tasks and look under the start for the last time in BIOS tab. More sophisticated motherboard is more time in BIOS.  Technology memory channel triple and quadruple take longer to initialize.  Using RAID will also slow down the BIOS time.

• Impossible to find songs w/workstation on the internal memory of fuse

  I copied songs (mp3) in the internal memory, repertoire of music. Fuse said there are 59 songs loaded, but

  When I look at this directory through the usb nothing shows? The fuse them play well? Just can not see them

  on the computer. It's a Dell m6300 laptop w/XP pro I'm usually good with this stuff... not his time. BTW, they are not

  hidden or read only files.

  I have not found too much difference between the two with regard to the quality, ease, blah blah. Personally I keep my in MTP mode just because it is easier to download album art. In addition, my computer-> right click on Fuze--> properties shows the battery charge level. Which came handy when I got my hands on a rocket that has languished. Cracked LCD screens are no fun.

• 12, WinPE 10 workstation: storage cmdlets work for non-virtual IDE, SCSI virtual

  I use Workstation 12 Pro to develop a code 10 WinPE for OS deployment/upgrades in service.   2 years without any problems, I have built several iterations.

  
  

  Some new hardware platforms must be built as VMware images using SCSI, instead of IDE virtual disks, as it has always been used previously.

  The VM with SCSI disks images works very well on XP Pro and POSReady 2009; However, when I boot to WinPE storage PowerShell cmdlets do not see the virtual SCSI disk, partitions, volumes, etc.   I was initially using WinPE 5.x with PowerShell 4.  I've recently updated to 10 WinPE and PowerShell 5, but still no joy.   On the two WinPE 5.x and WinPE 10, the only storage Cmdlet that works is Get-physical disk.

  In WinPE, diskpart and dos commands work fine with SCSI disks.  In PowerShell, the "Get-WmiObject Win32_DiskDrive" and "Get-WmiObject Win32_LogicalDisk" commands also work, but not the Cmdlets Get-disk storage, Get-Partition, Get-Volume, which all return a null output report.

  Any ideas or suggestions for debugging?

  Thanks in advance,

  vHomer

  Hello

  Thank you very much for the detailed information!

  I just tried your procedure using a VHD disk image. (P.s. "My physical machine can start on this VHD file, is not a broken image.)

  V2V converter can convert a VMDK image. Then, I created a computer virtual personalized by selecting this image VMDK file. But when I tried to convert it into a new virtual de VMware vCenter Converter Standalone machine, I got this error: "FAILED: could not find the system volume, reconfiguration is not possible.

  Conversion to a system of physical hard disk to a virtual machine of closing is not officially supported by VMware vCenter Converter Standalone. P2V guide (physical disks or Partitions in Vmware vmdk (P2V) conversion ".ultrageek.") you provide has a few involved third-party tools. It is difficult to say what has caused the problem.

  So, to isolate the problem, could you please try to reproduce the problem with only VMware Workstation? For example:

  1. create a virtual machine with a VMDK of VMware Workstation file

  2. make custom configurations: you can do it by the workstation user interface, or you can also change the configuration files of virtual machine manually

  3. reproduce the problem

  I tried the following scenario:

  1 create a Windows VM 10 x 64 custom with IDE virtual drive, attach WinPE ISO

  2. power on the virtual machine, it will boot to WinPE

  3. check the storage Powershell cmdlets work well

  4. Run diskpart, create a partition, format the partition to NTFS

  5. power off the virtual machine

  6 remove the virtual drive IDE virtual machine settings

  7. Add a new virtual disk in the virtual machine settings, select SCSI type and using are virtual disk file

  8. Select the virtual disk file removed in step 6, save and close the virtual machine settings

  9. power on the virtual machine, it will boot to WinPE

  Result: Storage PowerShell cmdlets work well with virtual drive SCSI in WinPE

  This test reminds me of one thing, Win10 x 64 support only this controller of storage in VMware Workstation:

  scsi0.present = "TRUE"
  scsi0.virtualDev = "lsisas1068"
  

  So please make sure that these two lines are in vmx file your virtual machine and they must be configured as indicated above. If this isn't the case, you can try to change.

  Kind regards

  Shawn

• 10.0.4 Workstation introduced "internal error" If vmware-authd service does not

  The v10.0.4 comes out must do more teleworkers laconically "solve the problem of memory on ms - win 8.1. He appears to have introduced some new internal dependency that requires the vmware-authd service always runs even in cases that worked very well in v10.0.3 without it.

  Species: Win7 x 64, guest host of XP Mode any cut down to the bare material (no usb in particular). Used to work under Workstation v10.0.3 with none of the VMware services started on the host computer. After the v10.0.4, it fails from the start with a box of "internal error." Manually start the service vmware-authd before starting the virtual machine to operate again.

  I hope this fix "windows 8.1" could itself be fixed as to not penalize anyone. Thank you.

  Hi dxiv,

  I just checked: the only change between the workstation 10.0.3 10.0.4 for Windows is the landmark of memory Windows 8.1, and it has absolutely zero overlap with Win7 host or anything related to vmware-authd.  There is absolutely no change of workstation itself that explains what you describe - certainly nothing intentional!

  You launch Workstation via "Run as Administrator"?  Are you sure that nothing has changed in your environment it (anti-virus, etc.) because of the change in behavior?  If you temporarily switch to Workstation 10.0.3, is the expected returns behavior?

  See you soon,.

  --

  Darius

• Pavilion Elite HPE-170f Deskto: Memory Upgrade

  I have the HP Pavilion Elite HPE-170f desktop.

  Motherboard: Pegatron IPMTB-TK (Truckee)

  Processor: Intel Core i7 CPU 920 @ 2.67 GHz, 2668 Mhz, 4 Lossnay, 8 logical processors

  Storage media: 6 x DDR3

  Memory type: Types DIMM PC3-8500 (DDR3-1066)

  I currently have 8 GB of memory.

  What is the maximum I can install?

  Operating system: win 10 Pro 64-bit

  Thank you

  John

  @jmwright1058

  Memory upgrade information

  • Architecture memory triple channel

  • Six DIMM DDR3 240-pin connectors

  • Supports types DIMM PC3-8500 (DDR3-1066)

  • Memory non - ECC, unbuffered

  • Supports DIMM DDR3 4 GB modules

  • Supports up to 24 GB on 64 bit computers

  • Supports up to 4 GB * on 32-bit computers

• Compaq Presario CQ5300Y desktop PC - memory upgrade

  Hello, everyone! I hope you are all well.
  
  I have a desktop PC Compaq Presario CQ5300Y, to which I would like to upgrade the memory.
  
  The product specifications indicate clearly that the motherboard, a M2N68-(Narra5), 2 x DDR2 memory media. (In addition, the amount of installed memory is 2 GB.)
  
  The product specifications, in the information section of upgrade memory also mention the following:

  -----------------------------------------------------------------------------

  Dual channel memory architecture
  Supports two DDR2 DIMM (240-pin)

  Supported DIMM types:

  PC2-5300 (667 MHz)
  PC2-6400 (800 MHz)

  Memory non - ECC, unbuffered
  Supports DIMM DDR2 2 GB modules
  Supports up to 4 GB * on 32-bit PCs
  * 32 - bit operating systems cannot resolve a full 4.0 GB memory.

  -----------------------------------------------------------------------------

  I'm clear (with what the article said) I have only available two DIMM DDR2 2 brackets.

  "What confuses me is the statement" ""supports 2 GB DDR2 DIMM '. This is the reason for my question.

  "Supports 2 GB DDR2 DIMM" means that I have to use 2 GB DDR DIMM only, which means I can only go to 4 GB? Or could I use 4GB DDR2 DIMM, which breaks the barrier of 4 GB?

  In a few words, I would like to - at least - 8GB (assuming that I find two modules DIMM DDR2 4 GB). Would it be possible to have the above configuration?
  
  It is important to mention that the PC is running a 64-bit operating system.

  I would appreciate the attention he can draw on this issue.

  Best regards.

  Hello:

  Each slot of memory on the motherboard of your PC cannot accept that a maximum of one module of memory of 2 GB.

  1 x 2 GB will work.

  2 x 2 GB will work.

  1 x 4 GB will not work.

  2 x 4 GB will not work.

• Business PC HP Elite 8100 SFF: Problem upgrade memory with operating system to 64 b.

  I have a small form Factor Business PC HP Compaq 8100 Elite, with 2 GB RAM and Intel Core i5-650 3.2GHz (n ° 2 x 1 GB 240pin DDR3 SDRAM Unbuffered DIMM DDR3-1333 - hynix HMT112U6TFR8C-H9 https://www.skhynix.com/products/computing/view.jsp?info.ramKind=20 & info.serialNo = HMT112U6TFR8C & posM... ) The operating system is Windows 10 to 32 b.

  In the reference Guide of hardware for PC installation additional memory is reported:

  Additional memory installation

  The computer comes with a double speed 3 vivid dynamic synchronous memory (DDR3 - SDRAM) dual inline memory modules (DIMMS).

  DIMMs of memory on the system card holders can be filled with up to four standard DIMM in the industry.

  These media memory are filled with at least one DIMM preinstalled. To obtain the maximum memory support, you can fill out the card system with up to 16 GB of memory. DIMM DDR3-SDRAM

  For the proper functioning of the system, the DDR3-SDRAM DIMM modules must be:

  • ● standard 240 pins of the industry without buffer non-DDR3-1066 MHz compatible or PC3 - 10600 DDR3 - 1333 MHzcompliant
  • Unbuffered ECC PC3-10600 DDR3-1333 MHz-compatible (Z200 SFF only) ● 1.5 volt DDR3-SDRAM DIMM DDR3-SDRAM DIMMS must also:
  • support the latency CASE 7 DDR3 1066 MHz (7-7-7 calendar) and latency CASE 9 DDR3 1333 MHz (9-9-9 calendar) ● JEDEC SPD mandatory information in addition, the computer supports:
  • front and double-sided DIMMs
  • DIMMs built with devices DDR x 8 and x 16; Built with x 4 SDRAM DIMMs are not supported

  NOTE: The MFS 8100 supports 512Mbit, 1Gbit and technology memory non - ECC 2 GB.

  NOTE: The system will not work properly if you install unsupported DIMM

  I replaced the ram 2 with 4 memory 4GB PC3 - 10600 CL9 DIMM 240-PIN - Kingston KVR13N9S8 / 4 http://www.kingston.com/us/memory/search/?partid=kvr13n9s8/4.

  The BIOS recognizes correctly the installed memory (16 GB) and in the OS installed memory is 16 GB (3.49 used).

  To take full advantage of the installed memory has wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  To make full use of the installed memory wanted to update the Windows 10 operating system to 64 b, but the PC goes into continuous reboot.

  I've updated the BIOS but the problem remains.

  I also tried to install Windows 7 64B, but after loading the files to start the pc freezes

  Reinstall the original memory, 10 to 64 b windows installs without problem.

  I want to know that is not compatible with the installed memory.

  And if it is possible to avoid having to replace.

  Thank you and best regards.

  @Peppe_Valenza

  I'm not surprised by the response of Kingston.  The issue of density memory was mentioned message #2.

  Try a few other manufacturers of memory and see if you can get the own memory DIMMs.

  Thanks for posting on the forum.

• I want to add memory

  Hi guys!
  On my system, installed memory seems Hynix 4 GB (1 slot)
  I want to buy another model to Advise 4 Gb. that precisely fits and is paired with the first module.
  Thank you.

  HP p6-2000ru H0B97EA #ACB

  Here's the info from the spec page:

  • Supports DIMM DDR3 modules

    • PC3-10600 (1333 MHz)

    • PC3-12800 (1600 MHz)

    • PC3 14400 (1866 MHz)

  • Memory non - ECC, unbuffered

    It is said that it is what is installed

    • Quantity: 4 GB

    • Speed: PC3-10600 MB/s

    • Type: DDR3-1333

• Upgrade my memory HP Compaq dc7100 Ultra slim Desktop PC

  
  

  sbmusk,

  Even if you're a little confused, and I feel a bit surly, here are your answers.

  How to install memory and constraints. See pages 2-11 thru 2-13.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00298116/c00298116.PDF

  Specifications for installation: (three modules of 1 GB max to the unit) for installation):

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00247168 & lang = to & CC = US & TaskID = & prodSeriesId = 430118 & prodTypeId = 12454

  Type of memory you can install is: 400 MHz, CL = 3.0, memory non - ECC DIMM DDR - SDRAM PC3200

  All the technical features are listed here:

  http://www.4AllMemory.com/memory/Compaq-HP-Business-Desktop-dc7100-USD/