WPC55AG sees not available networks

Similar Questions

• WUSB54GS sees not all networks.

  I just installed the software for this card under Windows XP and he does not see the network (on a Belkin G Plus MIMO Router). He sees any of all networks. I tried the manual installation, but it gives me a message "cannot associate the Access Point.

  The adapter is plugged in and the Green led lights.

  I'm not sure how to proceed with this problem. Any advice or suggestions would be appreciated!

  It was a problem of auto-affectation DHCP. Still not using the Linksys software, but fixed now.

• Menu item "Available networks" appears not-Windows XP.

  After a few years of use, all of a sudden my wireless stop working. When I follow the instructions of Windows and go to control panel / connections network and Internet, Microsoft Help guidelines say connect to wireless network, under available networks, click the wireless network to which you want to connect.

  But there is not 'available networks' showing. There were once! I used it, the PC has hung up, I rebooted and that you have not been able to connect from.

  I looked for answers here and haven't seen those who specifically say that the menu item is not displayed.

  Help! Thank you. :)

  If you do not see the list of available networks, your wireless network card may be cut or broken.  Many laptops have a switch that turns off the wireless radio.  Maybe it's a physical switch or a key combination (e.g. Fn + F2).

  You have an external wireless adapter or one that is built into your computer?

  If it is external, what is its brand and model?

  If it is integrated, what is the brand and model of your computer?

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the network adapter category by clicking on the +.
  What is the name of your wireless adapter (make and model)?
  Right-click on the entry of your wireless adapter and select Properties
  What appears under the "device status"?
  What is stated under "use of the device?

  What version of Windows, including the service pack is installed? Do right click my computer and select Properties, if you do not know.

• Bluetooth network is not available

  Been trying for a while to use AirDrop on my MacBook Pro (Version OS X El Capitan 10.11.6) and my iPhone 6 s more.

  Just realized today that it might not work because the Bluetooth on the Pro does not work. With each device I try a pairing, it says that the network is not available and that I need to make sure that network access is enabled. Trying to do this, system preferences > network > Bluetooth PAN, I get the same message. I need you to ensure that network access is enabled.

  Someone else had this problem? Any ideas on how to solve it?

  Open system preferences > Bluetooth. Make sure that Bluetooth is enabled.

• My I - phone 5 s is acting funny. I call a friend and she sees "Restricted" at the end instead of my name and phone number.  In addition, sometimes I call someone and the message is "that number is not available.

  My I - phone 5s has problems. I called a friend who has my name in his phone book and she sees on the screen "Restricted."  I try to call someone and I get"this number is not available. I call the company that provides the 'ULTRA' cell phone service and they tell me that I have to remove my caller ID. Yesterday I called a friend who I talked to for several years and my name does not appear on his phone.

  Your problem is a problem of carrier. You will need to go back to them and sorting.

• Network accounts are not available

  Hello

  I work in a corporate environment that is mainly based on Windows, but also have a handful of Macs and a Mac server. The question I have is that the MacBook display the prompt "network accounts are not available" when connecting. This message disappears when the VLAN from requiring authentication on our firewall device, MACs are to be excluded.

  I thought my our support company firewall that Macs are a kind of test at startup. If they do not have full access to internet NETWORK card wireless goes into a State of semi functioning. It is only when they have access to the internet it goes into a fully operational.

  It makes sense when the "network accounts are unavailable" message, I can't SSH in the Mac, but can't ping the IP addresses of our DC, ping any name FULL domain or ping any device outside the VIRTUAL LAN. Does exactly the same as this -after-reboot-no-route-to-host http://apple.stackexchange.com/questions/231290/mac-unable-to-login-network-user

  Our company firewall just remember exactly what service performs this function on the Mac. Anyone know what it's called?

  Kind regards

  Peter

  Any help here...

  http://osxdaily.com/2007/01/22/what-happens-in-the-Mac-OS-x-boot-process/

  During his execution, rc.boot and the other rc source of scripts /etc/rc.common , a shellscript that contains utility functions, such as CheckForNetwork() (check if the network is in place), GetPID() , purgedir() (Directory deletes the content only, not the structure), etc.

  • rc.bootfigures on the startup type (Multi-User, Safe, CD-ROM, network etc.). In the case of a network boot (the sysctl variable kern.netboot has the value 1 in this case), it works /etc/rc.netboot with a start argument.

  /etc/rc.netbootmanages all aspects of the network boot. For example, it runs the network and (as applicable) supports the. It also calls /usr/bin/nbst to associate a file of the shadow in the image of disk used as a root device. The idea is to redirect the entries in the file of the shadow, which hopefully is local storage.

  • rc.bootnumbers if a file system consistency check is necessary. Boots single user and CD-ROM does not run fsck. SafeBoot is still running fsck. rc.bootmanages fsck and return status.
  • If rc.boot has finished successfully./etc/rc

  http://Hayne.NET/MacDev/notes/boot_sequence.html

• Unable to connect to wireless network - WiFi is not available

  Hello

  The usual problem I have is that I can see the wireless adapter but when I go to connect it tells me that the adapter is not available and to update the list.

  I also - when I can connect - the connection drop after a period of time.

  Any help please

  Thank you

  Boris

  PS I uninstalled free config

  Hello

  As much as I know ConfigFree has no influence on the WLAN functionality because this utility is created for monitoring and not for configuration. When you want to use the WLAN connection do not forget that the wireless network adapter is correctly activated. If the connection is untied time trying to WLAN driver update.

• OfficeJet Pro 8210: network capabilities are not available.

  Hi, I have been setting up the printer above but I need to put in place on a network. I don't have the network option as it says "network capabilities are not available. When I print the network configuration page, it says network capacities have been disabled when the device has been implemented. I did not disable anything. The user manual says to use the display and move to restore the configuration - tools. I don't have an option to restore the screen of the printer. Please can you help me to reset the printer to factory settings. I'm a COMPUTER tech so don't know what I'm doing.

  Kind regards

  CMS

  Hi @CMS61,

  Welcome to the HP Forums! It is a wonderful location to converse with the community, get help and find resolutions. I understand that you don't have the network option on your printer as it says "network capabilities are not available. I'll be happy to help you in this regard. Great job, looking for user manual for the printer. It's always a privilege to work with a COMPUTER technician like you.

  However, to answer your question about resetting the default printer, it is possible by accessing the menu before display.

  • Turn your printer off.
  • Wait 10 seconds before you turn it back on again.
  • Just as the printer is turned on, press the back (arrow) button on the front panel of the printer "4 times."
  • If you do it right, the support menu should appear.

  Menu Access resets

  There are several options in the Help menu. To access the menu resets all what you need to do is navigate to the right until you find the menu "resets". Under Reset menu, you will find the three different types of resets, reset partial, semi full reset and reset complete. Select the appropriate type of reset you need, and your printer should reset itself.

  The partial reset

  Delivery to zero partial just updates the printer and erases the memory of the printer useless. This type of reset fixes minor printing problems like slow printing cartridge errors, etc...

  The semi-complete reset

  The semi Full Reset is the most useful type of reset. However, this clears all the custom of your printer settings and returns it to its default factory settings. Use this reset if the partial reset does not solve the problem.

  Please do not perform a full reset.

  It will be useful to visit these links.

  Link to perform a reset:

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/model/7902064/document/c05225613/

  Link to troubleshooting of the printer:

  http://support.HP.com/za-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/troubleshooting

  Thanks for reaching out. Please let me know if this helps in Mark this message as 'Accept as Solution'. If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click on the "Thumbs Up" button to give me a Kudos.

• Satellite A30-104: WLan not available - I turn on the wireless network card

  I have a Toshiba Satellite A30-104 with an inprocomm ipn2220 built in wireless card. The problem I'm having is that when I get a network says its not available and asks me to turn it on.

  The driver is installed for the card, the switch for the wireless is set on you and I pressed FN & F8 and yet led remains off and nothing happens.
  I watched autour and seen that some people cover the terminals 11 and 13 and it works but not too sure.

  I also should this problem with a new card or is there a way to fix this?

  Any help much appreciated.

  Hello

  I guess that you upgraded the wireless lan card later, didn t you? I know that 11 + 13 pins hint and it worked, but after awhile the card did not and the connection quality was so poor that I bought a card atheros on ebay and this card works really well. So I suggest that you are looking for a card atheros on ebay and to install such card in your system since the cards are known to work properly in the toshiba machines.

  My configuration: Tecra 9100 with P4M and Atheros 5005 G MiniPCI card

  Welcome them

• iCloud library is not available if the system library is located on a network file server

  I moved my library on an external hard drive, that drive is directly connected to my router via the USB port.

  I can make pictures to my library of photos and pictures of charge very well. I've set the library to serve the library system:

  

  But, by selecting the option of using iCloud library gives me this error message "iCloud library is not available if the system library is located on a network file server.":

  

  I have the ability to connect this external hard drive to an iMac which is used as a server, I just prefer not, but if it's the only option I want.

  So in short, can I use this configuration? If so, why the error message and how to cope.

  Thanks in advance to all.

  That's right - the library needs (for iCLoud, use of the library and for the safe operation) to be on a local wired connection - may not be on a network connection

  LN

• OfficeJet Pro 8600 Plus: network capability are not available

  Dear Sirs,

  The Officejet Pro 8600 Plus has already been set for a wireless connection. It was primarily used with the USB port.

  We've tried lately set up the wireless connection, and we couldn't.

  We received the message: network capabilities are not available.

  We could not move forward.

  We tried the factory reset, buit didn't work.

  I appreciate your help to resolve this isse.

  Concerning

  Ibrahim

  Please come back to me @Shahin_ij. I think the printer reset will solve the problem. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• The feature you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi'

  Original title: trayapp

  When I open the computer message appears, the component you are trying to use is on a network that is not available. Click OK to try again or enter a different path to the folder that contains the installation packagr 'TrayApp.msi' in the box below.
  C:\Users\user\AppData\Local\Temp\7zS5216\setup\TrayApp\
  When I click ok the message this way that c:\users\user\appdata\local\temp\7zs5216\setup\trayapp\ is not found. Verfy that you have access to this location and try again or try to find the 'TrayApp.msi' in installing a package file from which you can install the product'TrayApp.
  When I try to cancel the warning message, is that an installation package for the TrayApp product is not found. Again the installation again using a valid copy of the 'TrayApp of installation' package. I already uninstalled all HP products, but this message is still bothering me, how to solve this problem?

  Hey Tama,

  
  -What version of windows is installed on the computer?
  -Have there been recent changes to the computer before the show?
  I recommend you go through the next HP document and check if it helps.
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00811375
  Hope this information is useful.

• the Xerox workcentre 3550 network printer status is not available

  Having a problem with a xerox workcentre 3550 on a windows server 2008, this doen't impression and shows this error "the network printer status is not available.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• My internet rpet 'unidentified network' + "the default gateway is not available"...

  My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

  Hello

  ·         Did you do last changes made on your computer before the show?

  ·         Using internet connection wired or wireless?

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the firewall on your computer and check if it makes a difference.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

  Method 3:

  Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
  a. Click Start and in the search box, type cmd.
  b. right click on command prompt, select "Run as Administrator" to open a command prompt.
  c. at the command prompt, type the following commands:
  netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
  netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.
  d. restart the computer.

  Also, see this KB article:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Kind regards

• the component I am trying to use is on a network resourse which is not available, try the other way?

  When I try to install silverlight I get this error message, the function, I am trying to use is on a network resourse which is not available, try the other way? What now?

  Hello

  It comes to the installation of vista operating system instance

  Try the repost in the silverlight link below forums

  http://forums.Silverlight.NET/forums/